Mounting metal on the frame house allows you to protect the structure from rain, give it a stylish look. The duration of such works directly depends on the features of the erected house( the area, the form of the roof).The installation of a new roof can be done by any landlord. He just needs to choose the right materials, to study the detailed instructions for the work.
Contents
- Drawings and roof plans from metal tiles
- Laths
- Step-by-step instruction for assembling metal tiles
- Completion of works
- Tile mounting video
Drawings and roofing schemes from metal tiles
Laths
For reliable fixing of roofing, it is necessary to prepare a strong and reliable crate. It consists of wooden boards, determines the slope of the roof. For optimal rainfall removal it is recommended to mount rafters with an angle of more than 14-15 degrees. Between the three extreme boards it is necessary to install additional jumpers. This will make the design of the gable roof more durable and protects against strong gusts of wind.
The next stage is the laying of the vapor-waterproofing material. It is quite good proven vapor barrier Izospan. The material allows you to hold a really high-quality installation of the roof of metal, excluding the accumulation of moisture under the roof and the destruction of wood elements.
Next is the control of the lattice. Its purpose - the creation of an air cushion between the metal and insulation layer, allows you to additionally fix the roll material.
Before assembling the grate, you need to prepare the used bars and boards. It will be necessary to cover the elements with an antiseptic agent to maximize the service life. Then the bars are attached directly to the rafters.
Next, the crate is carried out: horizontal boards are fixed from the bottom to the top of the roof. The distance between them should be of the order of 25-30 cm.
Step-by-step instruction for assembling the metal tile
The mounting of the metal tile follows the installation of the brackets. They are exposed under the level, fastened to the bottom board.
Mounted on the brackets are gutters, a drip mount is mounted.
The drip cap is closed with waterproofing.
The installation of the metal tile is then carried out according to the following scheme:
1. The first sheet of metal tile( the work starts from the edge) is lifted, it is fixed in the upper part.
2. The sheet is fastened to the boards with the help of roofing screws( along the entire length and width).
3. The second sheet is lifted, it is superimposed on the first one( enough lapping for 1 lane).It is fixed in a similar way.
4. The remaining sheets are laid, up to the edge of the roof.
5. Work on a similar instruction is carried out for the second side of the roof.
The next step is the installation of the ridge.
For its smooth arrangement it is necessary to stretch the thread between the gables.
Next, fix the element from one edge, hold in the area of the joints, observing the evenness of the arrangement of both parts.
Then it is fixed from the opposite edge and fixes along the entire length.
Next, the snow holders are installed.
Completion of work
In addition to information on how to mount a roof of metal, the performer must remember the need for a high-quality closure of the end walls of the roof. You will need to use OSB plates for work. They have a low weight and are ideal for building a frame house. Mount the slab from the inside - the attic space.
Initially, the performer will need to take measurements and make markings on the slab, according to which it will be pruned. First of all, the side parts of the triangular shape are prepared. After their installation, the lower and upper parts are adjusted. It is important to consider that in the attic you need to leave a hole for the subsequent installation of the window. Once the last parts of the plates are installed, the gable roof assembly is completed. For detailed study of all the described stages, from the fixing of the insulation layer to the closing of the end walls, it is recommended to additionally view the attached photos and video tips.
