Interior finish of wooden house

Construction of housing from environmentally friendly raw materials is becoming more relevant. Natural wood is one of the few natural materials that meet all the requirements and sanitary standards. Wood is durable, heat resistant, with proper treatment - moisture resistant, available. Houses built of wood have a unique aura, bring their inhabitants closer to the surrounding nature.

A wooden house, especially if it is built of timber, will require a lot of effort for interior finishing workt with their own hands. Depending on the preferences, interior decoration can be done in ethnology, preserving the pristine beauty of the tree, or decorating it with modern materials. In any case, the quality of the work will depend on the degree of comfort and durability of the home. The article presents both a photo of the idea and a video that gives step-by-step instructions and recommendations for the interior decoration of the log house.

Where does the interior finish of the wooden house begin?

So, the finishing of the log house begins only after the laying of all communications. The complex of works on interior finishing of the wooden house walls includes:

Step-by-step instruction for interior finishing of a wooden house

Maintaining the correct sequence of work will not only save you time, but also avoid the alterations and costs associated with them.

Step 1. Wood processing with antiseptic

All wooden surfaces, the details of the communications are carefully treated with an antiseptic, as in the photo. This is necessary to protect the wood from larvae, mold and subsequent destruction.

Step 2. Filling the slots

The zakonopachivanie slots and holes will enhance the thermal insulation of the log house. It is important to carry out these works on all surfaces at once, without delay, as shrinkage of the house is especially intense during the year after the construction is completed. Caulk the walls of the stick, felt, hemp rope and even moss. Begin filling konopatku simultaneously on all the walls from the bottom up, while the work is carried out both inside and outside.

There are two ways of caulking: in the stretching and in the set. In the first case, the slits and voids are clogged with the plexus in the form of strands, after which they are twisted and pinned into the grooves. The method "in the set" implies the preliminary twisting of the material with long strips, which are then driven into the slits.

Step 3. Wall sheathing

There are several options for interior finishing of a wooden house with your own hands. Depending on the planned interior design and budget, the walls can be finished with a blockhouse, plasterboard, lining, or leave the bar in its original form. When choosing this or that material, it should be taken into account that within 5-6 years after the end of construction, the wooden house will shrink and may cause both misalignments and breaks in the finish.

Finishing with clapboard

Lining is the most environmentally friendly and cheap finishing material. Reiki can be located both vertically and horizontally. A lining is required if the surface of the log walls is not ideal. Space behind the crate, if desired, is filled with heat-insulating material, as in the photo. Before birthing, the billet should be leveled with putty and sanded. Varnish wood is better than semi-acrylic varnish for wood, not toxic, aesthetic, good to protect wood from drying out.

Finishing by blockhouse

Blockhouse is a kind of car board, imitates a log cabin. The fastener is similar to the usual lining. Blockhouse is often used in log houses, built according to the "paw" method, as well as for interior finishing of country houses and cottages.

Finishing with plasterboard

Finishing with plasterboard will give a modern look to the housing. Such walls can be painted or wallpapered. But it is not recommended to make such interior decoration in a wooden house, becauseThe wooden house ceases to be environmentally friendly due to the abundance of chemistry!

Step 4. Ceiling installation

The type of ceiling in a wooden house depends on whether the attic space is isolated or combined with a residential area. In the latter case, you can try to preserve the log texture, but this is fraught with the flow of the roof, the formation of condensation, low noise insulation. In such cases, it is necessary to take care of the insulation of the roofing cake, or the roof covering from the inside.

Step 5. Installation of the

flooring The flooring in the wooden house provides a lot of options. The presence of double or insulated floors is being decided at the design stage.

Of course, in a wooden house the ideal flooring is boards painted or varnished. Laying modern coatings( parquet, laminate, linoleum) as an interior trim of an old wooden house, it is worthwhile to take care of updating the entire interior. A harmonious combination of these or other finishing materials, even if they are alien to each other - a pledge of a successful interior, as in the photo.

Photo of the interior trim of the wooden house

Below you can see various interior trim options of the wooden house:

Video of the interior decoration of the wooden house with your own hands

We recommend you to watch the video of the interior decoration of the wooden house in order to understand all the subtleties and nuances of this process: