Waterproofing of the foundation technonikol

Waterproofing of the foundation "TechnoNikol" is popular with builders due to a wide range of waterproofing materials, high quality and technical characteristics, which allows choosing the material for waterproofing any, even the most complex structures.

Foundation waterproofing is carried out in several ways: pasting, coating, impregnating and using waterproofing. The company "TechnoNikol" offers all the above types of waterproofing.

Oak waterproofing

Oakleychnaya roll waterproofing foundation "TechnoNikol" is represented by several types of materials, we will consider each of them.

1. Technoelast EPP - floating roll material for waterproofing foundations based on fiberglass or polyester with a bilateral bitumen-polymer layer, the outer side is reinforced with a fine-grained powder, the inside is reinforced with a polymer film. The material is biostable, long-lasting withstand hydrostatic loads up to 0.2 MPa. Apply Technoelast EPP for the foundations of buildings with a close location of groundwater, on sites with seasonal soil movements. Mounting method - vertical or horizontal, by fusing.
2. Technoelast ALPHA is a roll welded material made of double-sided polyester material reinforced with a layer of foil, coating is bitumen with a plastic plasticizer. Protective coating - polymer film. It is used for the waterproofing of foundations with the possible radiations of radioactive gas radon rocks.
3. Technoelast Barrier and Barrier Light is a roll material with a self-adhesive layer of polymer film, it is used for external and internal waterproofing, including waterproofing of basements. Technoelast Barrier Light is distinguished by an additional layer of non-woven material from the outside of the film, which facilitates further finishing.
4. Technoelast MOST - roll waterproofing, used for horizontal waterproofing of the foundation foundation, is distinguished by its high strength and resistance to punching.

Soil insulation, mastics and primers

TechnoNikol Company besides a roll waterproofing also produces a wide range of compounds designed for coating and sprayed impregnated waterproofing. The coating is waterproofed using bituminous, polymer and combined hot and cold mastics. Their main difference is the temperature of the applied solution. Hot mastics are more difficult to apply, but they penetrate deeper into the foundation material, filling all the capillaries and cracks. Cold mastics can be one-or two-component, requiring mixing with the activator before application. For better adhesion of waterproofing with a coating primers are used - primers for bitumen and bitumen-rubber solutions. The most popular waterproofing formulations produced by TechnoNicol are as follows:

1. Mastic "TechnoNicol" No. 21 - mastic with increased strength and water resistance up to 0.1 MPa, thanks to the modifying rubber additive. The method of application is cold, at mild temperatures the mastic must be heated. The minimum number of layers is two.
2. Mastic "TechnoNicol" №24 MHNT - bituminous one-component mastic with the addition of mineral reinforcing filler, for cold application. Apply by brush or roller in several layers. It withstands hydrostatic load up to 0.001 MPa and is used for waterproofing the basement from capillary moisture. To cover porous surfaces, a primer is first necessary. The solvent is white spirit.
3. Bitumen bitumen "TechnoNikol" №25 - is designed for the processing of concrete surfaces, suitable for the upper part of the foundation. Can be used as a primer for painting.
4. Water-based mastics "TechnoNicol" No. 31 and No. 33 - water-based emulsion solutions for spraying, made with the use of dispersed oil products and emulsified latex. It is possible to apply mastic mechanically. Water resistance is up to 0.1 MPa per day.
5. Mastic "Technonikol" MBK-G - mastic for hot use, is produced in briquettes and requires preheating to 160-180 degrees. Apply with a spatula on the surface treated with a primer, as a lubricating waterproofing or under a roll-up waterproofing. Advantages - low price and fast hardening.
6. Primer "TechnoNicol" № 04 - bitumen emulsion, used as a primer for porous and dust coatings for bitumen waterproofing. Water-soluble, quick-drying, can be used for mounting and polymer roll waterproofing.

Primer AquaMast on bitumen basis is used for the preparation of bases for bitumen mastics based on organic solvents, as well as for bitumen waterproofing. It differs in good penetrating ability, it dries quickly.

Also, the company "TechnoNikol" produces a membrane mounted waterproofing PLANTER, used for highly effective protection of the foundation and other structures from moisture, chemically aggressive substances, biological destruction. It is produced in rolls, it is made of a polymer membrane that provides moisture drainage from inside the coating, and a protective spike layer that improves condensation and drainage conditions to the drainage system.

All materials for the waterproofing of the foundation "TechnoNikol" are certified, have convenient packaging - rolls of 1 m wide, metal sealed pails of 20 l, or briquettes. Detailed specifications and directions for use are on the packaging.