How to glue vinyl wallpaper on a paper base

Vinyl wallpaper on paper basis is very common, have a wide range of colors and design solutions. Their popularity leads many to the need to paste such wallpapers themselves or invite experts.

Contents

  1. Preparatory stage
  2. Step-by-step instructions for gluing vinyl papers on paper basis
  3. Conclusion
  4. Video

Preparatory stage

Before gluing it is necessary to prepare the surface in a special way. The walls must be made even, without cracks and fragments of old materials. To remove old materials, they can be diligently moistened and removed with a spatula. Also it is necessary to remove the sockets and switches.

It is advisable to conduct the treatment of walls with a fungicidal agent, which will exclude the possibility of growth of the fungus. If this treatment is carried out, then it must be allowed to dry completely, because the surface intended for pasting should be dry. Another prerequisite for how to glue vinyl wallpaper on paper basis, is the lack of air movement, so before starting work isolate all sources of its intensive receipt.

The wallpaper itself needs preparation. Before gluing it is necessary to carefully measure and cut off the desired strip, adding 10 cm in length. If the wallpaper contains a picture, then it is necessary to adjust it so that the picture is beautifully matched.

Step-by-step instruction on gluing vinyl wall-paper on a paper basis

Any wallpaper made on paper basis, do not immediately glue to the wall. We need to spread them on the floor. Then thoroughly glue them with glue. Well seen in the video, how to glue vinyl wallpaper on a paper basis, including how to apply glue.

The next step is to fold the wallpaper in half or three times with a greased base to each other. So they should be left for a while. This is necessary for the swelling of the fibers, after which the wallpaper will stretch slightly. The swelling time can be individual, depending on the particular material. You can find out this time on the package. The main thing is that all the bands are in this state an equal amount of time. The adhesive must also be applied in the same layer. Then the result is a wallpaper with perfect joints.

It's better to start the pasting from the corner. In this case, it is necessary to apply the level so that the bands do not go at random. It is better to use an assistant, which will adjust the alignment of the wallpaper. This is the most convenient option for those who do not understand how to glue vinyl wallpaper on a paper base in the joint neatly and without overlaps. If the glue accidentally falls on the color side, it should be immediately wiped off.

During the sticker, you can not stretch the material to the width, this will lead to deformation and subsequent unevenness. These wallpapers are simply smoothed out with a special roller or plastic brush.

In the corner, you must leave a lap to another wall of 3 cm. When gluing the strip from the opposite side, the canvas is laid directly into the corner. More details can look at the article: how to glue the wallpaper in the corners.

Excess material should be pruned with a sharp knife. If you use a blunt blade, then the wallpaper may be wrinkled. The bottom edge should go slightly to the plinth. To achieve a neat appearance, it is advisable to remove the plinth in advance.

Conclusion

Vinyl wallpaper gluing on paper basis is completed with the final design of the space. After the wallpaper dries completely, you must fasten all the elements that have been removed before pasting: rosettes, switches, plinth, decor elements.

Since the vinyl layer reliably protects the bottom paper from moisture, these wallpaper can be washed during use.

Video

For clarity, we recommend that you watch a video on how to glue vinyl wallpaper on a paper base.

instagram viewer