Logical completion of any repair is the gluing of vinyl wallpaper, which often causes many difficulties and problems. After all, the procedure is sufficiently responsible and it should be performed correctly. To help you with this issue, we will tell you the most important thing you need to know.
What is a vinyl wallpaper?
What are vinyl wallpapers?
Vinyl wallpapers have their own manufacturing technology, consist of two layers, are glued in the usual way, virtually are not susceptible to moisture, they can be washed with warm water. Often used in the bedroom, living room, do not have a negative effect on human health.
Consider the most exciting question for everyone - how to glue such vinyl wallpaper? If you decide to save without recruiting a team - then you can be happy - you will cope with this task. Of course, it would be good to have many years of experience doing this work, but everything happens for the first time, so let's start from scratch.
Preparatory work for
Suppose you have a vinyl wallpaper, and there is also a special glue available, which the adviser advised you in the store. Since ancient times, you have left a spatula, a brush and a clerical knife - all this you will need. Then we look at the walls, they are already level, prepared - it remains only to primrate the surface. How to do it, well demonstrated in the video story on how to properly glue vinyl wallpaper. In it everything is consistently and structured, from the very first stage to the last. Therefore, it is very useful to you and will become your personal mentor. Agree, there is nothing better than to look at the process from the outside.
Please note that it is extremely difficult to do the job yourself, it is better to find an assistant who will hold the bottom and help to apply evenly glue.
Step-by-step instructions for gluing vinyl wallpaper
To begin with, we take an oilcloth, spread it on the floor so as not to soil the outside of the canvas( sometimes old newspapers use it, but they often stick together with the canvas, so this option does not suit us).
Next, unwind the roll, measure the right size, cut off the remainder. After that, we cover the inside with glue, you can apply it both with a brush and with a roller - here you choose what is more convenient for you. The linen must soak, so we stand time( up to 3 minutes).
Take the strip and apply it to the wall( we follow the direction of the picture and the way the wallpaper is placed above and below), smooth them from the center to the sides. With the second piece it will be more difficult, it should be applied butt-end, find the coincidence of the represented elements - we repeat already fulfilled sequence.
Thus, you glue the entire perimeter of the room, pay attention to the corners, here one strip will be superimposed on the other with a large margin. The edge of the superimposed linen is carefully smeared with glue, so that it firmly seizes and does not move away. If you are a beginner, problem areas will be places for sockets and skirting boards, batteries. In this case, you can not do without a special knife, with the help of which, carefully trim the excess.
In essence, the process of gluing vinyl wallpaper is completed, the only thing left is the procedure for drying the pasted surface, which must pass without drafts.
With our advice and recommendations, you now know exactly how to properly glue vinyl wallpaper. And there is knowledge - it means that there will be a good result. Learn new things, and then everything will become possible for you!
Video instruction for gluing vinyl wallpaper
In the video below you can visually see how to glue vinyl wallpaper.