Getting rid of the condensation on the cistern - once and for all

One of the unpleasant moments in the bathroom combined type may be the occurrence of condensation tank plumbing fixtures. This can become a serious problem, leading the many devastating effects. In addition to reducing the level of comfort, it can harm human health. How to remove condensate and to prevent its occurrence in the future? Consider the causes and ways.

From what appears condensate

What is condensation? This liquid droplets formed by the sharp contrast of cold and heat, projecting on the surface of various objects. Very often we can observe this phenomenon on the products just brought from the freezer, on wooden boxes, etc. As it is known to eliminate the consequence - the need to understand the reason.

To do this, pay attention to the following points:

• degree of water consumption in comparison with its actual flow rate;
• the functionality of the ventilation system;
• humidity in the room;
• state of structural elements toilet tank.

If the container is emptied and filled with relatively frequently, it increases the concentration of the condensate, as the cold water coming from the main water pipe, and particularly when -zimoy unheated basement, simply does not have time bask.

If the bathroom does not function or does not operate the ventilation system and the front door is always closed and locked doorsteps without a gap, the appearance of drops of water on the tank, as a rule - the usual situation.

Another reason - the failure of the valves blocking valve leak gaskets or breakage of the float. In connection with this increased water consumption, it does not have enough time to warm up and consequently the condensation.

If the level of bathroom humidity is too high, the reason for this may be part of the dryer with the door closed. Or the circulation of air flows penetrating into the room of the adjacent spaces.

In any case, regardless of the cause itself, consequently must be removed, since entail the occurrence of this phenomenon can damp, mold and mildew to room finishing. And this is in addition to violations of aesthetics, and even a threat to human health.

eliminate the cause

The method is, and he's not alone. Consider the most affordable.

Modernizing tank - step by step guide

Most often, some manipulation of faience tank can help to address the causes.

Namely:

• repair of structural elements of a tank;
• installation of a special plastic liner from the liner into the middle tank;
• Thermal insulation of the inner vertical surface of the tank;
• Replacement pads.

The most drastic measure is to replace the design of a new earthenware products preloaded with anti-condensation

Step by step instructions on elimination of breakage:

Step 1. Overrides tap water for toilet or bathroom.

Step 2. Remove the cover from the product.

Step 3. Disassemble the valve.

Step 4. If a broken spare part must be replaced - carry out the replacement. In the If you can not - you may need to replace the entire mechanism.

Step 5. Establish a mechanism in the tank, do not forget to change gaskets.

As a rule, in most cases, this method is most effective, because there will be a leak - to eliminate the problem.

climate change

By this method relates recovery ventilation system operation in case of dysfunction and the use of the dryer air flow - a special device, the humidity in the room down.

First, check the ventilation duct operation, bringing to the opening match or lighter. If you have a craving - will fire its direction. With a weak thrust required cleaning ventkanalaThat runs a special service. If after cleaning the craving is still small, it is possible install an additional fan.

Also unwanted droplets of water can be eliminated by using a heating structure of the working fluid. If earthenware container will be recruited warm water, large temperature contrast will not, and there is no reason - there is no investigation. It can be done in several ways.

The easiest method - plug flow of warm water in the tank. You can still warm water pipesSometimes rescues and this reception. A very simple - it is customize incomplete way of flushingTo the rest of the heated water always remains in the tank.