Recently settled in the new apartment and were able to overpower the only cosmetic repairs, and furnishing finances are sorely lacking? Such a situation is not unusual, but not super comfortable without furniture, especially if there is not a necessary attribute, as a bed. Can I make a bed out of scrap materials? Creative ideas and step by step instructions - further.
From what we can make a bed
even the most unexpected solutions can be used to create an original design. And in the old apartments, as a rule, something so remain from the former owners.
In the course can go absolutely any available materials:
- old doors;
- remnants of brick;
- old furniture;
- available in stock board;
- cardboard;
- timber;
- old magazines and books;
- trays;
- plastic and glass bottles;
- pipe.
Looks around, appraising look absolutely everything you are going to throw at harvest in the pantry or on the balcony.
The idea №1 - Bed cardboard
Cardboard today - very available materialWhich you can get in the right quantity and to make it easy. Walk into any a nearby deli, negotiate with vendors and a couple of weeks you collect the right amount of material. You can speed up the process by connecting several such stores. also great
If the boxes are available with different fractions and size, the easiest way to build a structure as shown in the photo above.
Instructions for the production of:
- We make a drawing. The simplest design option - a small podium of cardboard under the mattress. If desired, you can build him the legs, but it is possible to do without them.
- We select the material. Choose from the available raw materials cardboard, which is not damaged, has more or less neat appearance. All the boxes disassemble, removing unnecessary elements (stapler staples, tape, etc.).
- Putting the first row. The most optimal variant of the assembly - a fastening element using PVA glue. Make it pretty simple: Puts the first layer structure in such a way that the outside of the material has been laid intact. Is then laid the second layer of cardboard. Care should be taken so that after laying the second layer structure is not broken up. That is, all the elements essential to stack offset.
- connective. Glue glue the first and the second row will be after you make sure that the structure will be firmly grasped.
In Example 3, step 4 and collect the entire structure.
Remember: stick material can be only after the "fitting". Thus, sticking bed until the desired height. When the structure is dry - bed will be ready for operation.
The idea №2 - Bed of pallets
Wooden pallets out of the building materials today - one of the most common options for the manufacture of furniture with his own hands. There just does not come up with delights designers, creating a truly original designs.
Take the trays can be based on any building where they can donate or give away just for a nominal fee. Already starting from the available amount of material can choose the design of the proposed variants or create his own. Making your project, be sure to secure the result on paper for ease of installation.
for the manufacture of the algorithm:
- preparation of material. Available pallets must be sanded. If you want to give the tone material, pallets can expose one or more layers of the stain.
- construction assembly. According to the draft, collect structure, fastening screws trays.
- The final touch or decorative trim. We reveal the product or any other lacquer paint coating.
The idea №3 - Bed of plastic bottles (step by step instructions)
This material is considered to be one of the most accessible, however, to build from it something decent, you need to pick up a bottle of the same color and size.
Instructions step by step:
Step 1. Preparation of the material. To construct was maximally solid, bottles with lids unscrewed a few hours in the freezer. The best option for the preparation of bottles - winter. At this time of the year you can immediately prepare the required amount of material.
We close the lid of the bottle in a few hours (do it better in the same cold environment) and entered in the heat. Due bottled laws of physics will create a vacuum effect, and they will very strong.
Step 2. "Fitting". Calculate the required amount of material, so we expose the bottle will look like a finished product. As a rule, made of simple podium vertically arranged elements, if desired, can be set back.
Step 3. design assembly. Putting the bottle to each other two-way tape.
Step 4. When the structure is fully assembled, anchoring compound adhesive tape. The bed is ready!
To give the bed a respectable appearance, you can make her fabric cover or to confine a cape on the floor.
2017-2018. Copying of materials is possible without preliminary negotiation in the case of a direct hyperlink to our website.
