Sliding doors - the pros and cons, the simple step by step installation instructions with their hands

Sliding doors are gaining more and more popularity due to its original design. They do not take up too much space, easy to operate and allow extraordinary diversify the interior. Advantages and disadvantages of the sliding door constructions, as well as instructions on how to install - on.

What is a sliding door

This is the same of interior door leaf, as we used to see at home or at the neighbor differs only way of opening - parallel to the wall or another leaf.

Constructive types:

• Door coupe may have one or two sash during opening move parallel to the wall, driving in different directions.

• Cassette doors different from the traditional coupe that when you open the hiding in a specially prepared niche in the wall. The very niche can be packaged with the recoil system or sold separately. Also it can be made independently of plywood or drywall.

• radius doors in design similar to a door-coupe. They may also have one or two flaps on the same principle open, only a wall, parallel to which they are moving, has a non-standard semi-circular shape. These doors are more suitable for large rooms atypical forms.

• cascading doors operate on the principle of a coupe with the only difference being that when opening ou can pull off both in one and in the other direction, hiding behind each other, but not against the wall.

Also sliding doors have their own classification mechanism works, type of control, and material fabrication. The sale can be seen sliding doors metal, wood, plastic, glass or compositeBut most often chosen combined version - wooden doors with glass bids.

Advantages and disadvantages

In addition to its originality and great possibilities sliding door has other advantages:

• no nut, which for some people can be a whole obstacle;
• Space saving: no dead zone is provided for opening the sliding door in the room;
• ease of use;
• possibility of automation.

Each door design has its own characteristics, and if you like an option due to the incontestable advantages, it should know a little about his shortcomings. Roller mechanism calls for a special attention. If we grease every door in the traditional awnings 10 years, You need to wipe the rollers from adhering debris and oiled, at least twice a year. Otherwise, the door will creak, jam and cease to function properly. In addition, this door will cost considerably expensive.

Step by step instructions for installing the sliding door

The preparatory phase includes the selection of the door and the preparation of all necessary - materials, tools and fasteners.

Step by step instructions for installation as follows:

Step 1. Preparation of the opening. The doorway for a sliding structure should be smooth, clean and does not have other elements.

Step 2. Installing the hardware on the door leaf. At the ends of the fixing roller door.

Step 3. The middle fabric fasten control mechanism. Often the door handles for sliding doors are made of drowning.

Step 4. Mounting of the upper guide rail. This is one of the most important steps. Incorrect markup will lead to uselessness of the system.

Step 5. Setting the lower element, which will hold the design.

Step 6. Installation of the door leaf in place. The guide rail we start door, not forgetting the lower roller which is fixed to the floor. The door should fall into the grooves. Only after that can be placed on the rail caps.

At the final stage, there is only set for final assembly of the rack, remove the debris and check the availability of the system. Just installed a door should be easy to walk along the track, do not creak and not catching anything. If the result is you are not satisfied - identify the cause of jamming and eliminate defect.

If you do not eliminate all problems at once when installing such doors soon need repair. The sliding door is fully ready for use only after you verify correct operation of the roller mechanisms.
Successful installation!