How to decorate the apartment with his hands a material such as slate

The interior of the house - is a kind of perception of ourselves as individuals. The fact that we are ready to bring to everyday life. What is often lacking in modern life and the transience of the metropolis even the slightest reminder of the green grass, evergreen trees and starlight.

Increasingly used a decorative stone in the interior living room or bedroom, as the slate in the lining of the sexes.

Specificity of slate tiles

Itself has a heterogeneous structure on the surface often there are areas that are most exposed to the appearance of dirt and dust. Therefore, the tiles have to undergo additional treatment, even if you are sure you do not need.

Buying slate tile will cost you much cheaper than than the purchase of marble or natural marble.

The material itself is a rather cheap analogue of tiles, so it should be installed in similar spaces: bathrooms, hallways, basements.

Laying slate tiles

Laying slate tiles is not easy, which sometimes calls for a more careful and attentive attitude rather than another type of tile. If you have not done such work on their own, it is better to take the help of experts. So you can be sure that your floor will turn out perfectly smooth and attractive.

In the event that you are, nevertheless, confident in their abilities, to follow some tips and guidelines:

1. Choose a thinner tiles.
2. For cutting tiles, use a diamond blade.
3. Once again recalculate all to understand that you are sure to correctly carried out all measurements.
4. Try not to hurry - this tiles requires very careful attitude.

How to put slate tiles with their hands - step by step guide

Step 1. The first step is carefully prepare the surface on which you plan to put a tile. To do this, you will need to fill the screed.

Step 2. There are tiles with uneven edges, therefore it is necessary to identify and tag markup. Tiles are cut using grinders and diamond disc. Be careful when flying dust - try, so it does not get into your eyes.

Step 3. Tiles must be laid from the corner to finally come out of the room. Use specialized mastic, which you can buy at any hardware store. In appearance it is very much like porridge and contains a material such as rubber.

Due to this, in the future, after drying, it creates a light effect of the spring. Mastic is applied using a trowel. Due to the uneven thickness of rings, somewhere will impose greater adhesive layer.

Thus the whole surface, moving from one side of the tile to another. Try to work so that there is not too much of mastic - or extra materials will get out of the tiles.

Step 4. Wait for the complete drying of mastic. As a rule, it is necessary to wait about twenty-four hours. For a more uniform drying, you can lay on the tile thick polyethylene film.

Step 5. To fill the joints between each tile using a specialized sealant that you can buy at any hardware store. This will protect your tiles from future damage. Apply it with a special gun.

Step 6. In order to protect the tiles from moisture and dust, many experts recommend to apply paint to the surface. Updated such coating after a few years. Usually this occurs after two or three years of active exploitation of the tiles.

It should be noted that the tile cutting - it is very dusty, so use a special mask, which will protect the entire process. Additionally, laid material such as slate, must with great strength, regardless of whether the material is considered to be sufficiently brittle.

Most thin tiles Lay preferable to the upper floors, where there is a heavy load, both on the first floors of buildings.

Care slate tiles

Which can not but rejoice, because this is what the slate tiles do not require special care. For a complete cleaning it occasionally is enough to wipe with a damp cloth and ensure that the surface is not placed very heavy objects.

When you are cleaning the room once again, make sure that the slate - a great natural material that does not create a lot of difficulties when dealing with him.