PVC panel for the bathroom: how to mount their own

Decorating the walls in the bathroom using the plastic panels

PVC bath panel: Advantages and Disadvantages

PVC wall panels are a modern finishing material. They are made of a polymeric material, so no water is passed. The material for walls made as a 3-meter long hollow perforated inside the panels. This length allows installation without horizontal joints in any residential area. Their width may be of several standard sizes.

front part panels It has different patterns and coloring. The ends of the product have special locks for ease of installation. When decorating work with this material must be purchased along with it various additional elements: internal and external corners, strips and borders.

Color variants of panels of plastic

Of the drawbacks may be mentioned: little strength, poor environmental plastic panels and poor design choice. Although there are a large number of colors and designs, freedom in design decisions is limited due to the characteristics and dimensions of mounting material.

Choosing panels on the bathroom wall

If you decide to make the finish of the walls PVC panels for bathroom, You need to properly make their choice. There are several kinds of plastic wall panels, of which PVC is the cheapest option. At the same time, the material has good water resistance, it can be used in rooms with high humidity such as bathrooms.

Related article:

Photo bathroom renovation small sizes create a bathroom with the mind. Plan space: the choice of tiles, lighting, furniture, washing machine. Pipes and waterproofing.

When choosing PVC panels should pay attention to the fact that they were no different embossed decoration. They give greater volume and originality, but only in the bathroom, such things can cause the accumulation of dirt and mold, which is unacceptable.

Moldings are used to installation of PVC panels

The color scheme should match the size of the room. The smaller it is, the brighter the colors should be. Dark colors visually reduce the space. Using black unacceptable also because it is good to be seen any minor contamination. It seems the most optimal use of light blue and green tones. Such gamma promotes relaxation and recreation. Bright colors red spectrum cause agitation and aggression.

A combination of finishing in the bathroom tiles and PVC panels

In style, there are different patterns. It may be natural motifs: flowers, leaves, sea blue. Geometric shapes on the surface of the walls, too, do not lose their relevance. In commercially available panels in the form of panels with different compositions, but they are much more expensive. Choose your style and colors should comply with the tastes of the owners and be deliberate in detail.

Useful advice!When planning the installation of plastic panels in the bathroom need to immediately determine the point of attachment for various cabinets, shelves and other interior elements. These places need to pre-fix the wooden rods or profiles. This will help to further firmly fix these items on the walls without damaging the newly-assembled panel.

PVC panel in the bathroom

Step by step instructions for installation of PVC bath panels

The self-decoration of the walls the bathroom plastic panels no big deal. Any man who has a repair skills, is able to make high-quality lining, if it is to follow certain instructions and rules.

Before starting work it is necessary to calculate the material requirements. It is sufficient to measure the perimeter of the bathroom. In most cases, one panel has a width of 25 cm. Therefore cladding 1 meter sufficiently 4 panels. If the width is different from the standard, the calculations need to do individually. Besides the base material is required to get the corners and other additional elements. Their number is also not difficult to calculate.

Tools required for self-assembly of plastic panels

Useful advice!Purchase at the store necessary material with a small margin, as the corner panels likely to be clipped. In the calculations must not forget to subtract the doorway area.

If the installation of panels planned for the crate, you need to purchase the right amount of support studs. They need at least three on each wall, although it can be longer. When mounted on liquid nails or glue this is not necessary. Must be available and the tool: screwdriver, sharp knife and gun sealant.

bathroom panels and furniture chosen in one color

Preparing walls

The advantage of plastic panels is their ability to hide all the irregularities of the surface. Therefore, the walls in any serious preparation need not be if there is no mounds larger than 10 mm. height. Such irregularities can be simply cut off, not paying them much attention. The situation is different if you plan to stick the panel. In this case the wall must be perfectly flat.

It should be in preparation for the work to pay attention to the wiring. If the wires are old and they are on the surface of walls, it is best to replace them, because then this would be problematic. Do not be amiss, and drawing on the wall waterproofing material. This is especially true if the walls are made of wood.

Plastic panels of white color in the bathroom

The choice of fixing

Plastic panels attached to the walls can be in two ways: on the glue on the rails. The first method is the easiest, but has several disadvantages. It is suitable only for a perfectly smooth wall. Glued panels subsequently very difficult to detach from the wall, making it difficult to dismantle in the case of the new repair.

Possible forms and textures of PVC panels

Mounting panels for lathing is the most convenient way. At the same time on the small irregularities of the walls can be ignored, and disassemble such a structure, if necessary, will not be difficult. Crate can be made of wooden bars, but it is better to buy the factory plastic guides with special locks for fixing the panels. This eliminates the need to twist in each panel of a few screws. In addition, in a wet basement wood will rot quickly.

The guides are installed horizontally in the ceiling, floor and in the middle. The panel is attached to the rails using special clips, which greatly facilitates assembly and disassembly.

Bathroom interior with PVC panels can look very stylish

Mounting panels

Installation of PVC panels for bath should start from the corner farthest from the entrance of all in the following sequence:

1. The first panel is trimmed in height and fixed with clamps or screws to guides vertically.
2. The following panels are inserted into the end face each other in the castle. This allows them to plant firmly and hide fasteners.
3. Gradually closes the entire wall. With the need to control the level of vertical mounting.
4. When he reached the corner, circumcised panel and close the switch to another wall area.
5. After completing the installation of all panels, the ends must be closed with the help of edge profiles.
6. The design of the decoration is completed the installation angles or cornices to the ceiling and baseboards to the floor.

Scheme PVC mounting panels

All corners and joints, where possible penetration of moisture to be treated with sealant. This will protect against the occurrence of unpleasant situations in the future. When facing walls of plastic panels, the same material can be closed and the ceiling. This approach will protect from penetration of moisture in the overlap.

White plastic panels in a bathroom

Useful advice!Owners of apartments in new buildings is recommended to furnish the bathroom PVC panels. This will avoid cracking the tile from shrinkage at home. After 2 - 3 years to do and a tiled floor.

If properly selected and carefully mount the wall panels made of PVC in the bathroom, it will be not only functional and waterproof, but will also look beautiful and stylish.

Decorating the bathroom PVC panels with their own hands (video)