Woodshed with his hands: for the storage of logs construction

Villas and holiday homes are in need of alternative fuels, as are most commonly used wood. They are needed for lighting stoves, saunas and barbecues. woodshed - for storing firewood special facilities are used. In some cases, for this purpose, refurbished barns. Build a woodshed with their hands and everyone can, but it needs to examine the procedure for work and rules conducive to the correctness of the drawings.

Woodsheds, drovnitsa and woodshed: photos and specifications

There are several variants of simple structures that allow you to store firewood. In this case, it is important to understand the terminology, as such, may vary from woodshed drovnitsy. In some regions of Russia, these terms refer to the same concept, but the differences between these buildings are still there.

Woodshed - a firewood shed, which is made of wood and often has a foundation. This building belongs to the group of separate buildings, so is not adjacent to a residential home. In turn, woodsheds is a simplified variant of woodshed. Its main difference is that it has a construction shed, which is adjacent to an apartment building.

Another construction of fuel storage - drovnitsa its most simple structure. Drovnitsa is a small basket with which the transfer is made of wood. The term can also denote a stand under the wood.

Photo drovnitsa and other structures allow more clearly understand how they differ from each other. Despite their differences, each of these buildings used to store firewood. When assembling the woodpile should be familiar with its structural features due to destiny.

Features storage of firewood in the country or in a country house

Wood is an indispensable resource, allowing heat suburban dwellings. In those places where there is no gasification, using a similar fuel. It is used not only for heating but also for lighting up the bath, as well as if you want to cook the meat on the grill. To the wood is not damp, it is necessary to pay attention to some nuances of storage.

As a rule, wood stocking up for long, so the volume of purchased or harvested batches rather large. Such fuel may be stored in a shed, garage or any other construction having a roof. In some cases, the site owners build special woodpile (stand alone or adjacent to the wall of the house).

In order to perform it yourself, you must study the algorithm works, giving the opportunity to answer the question of how to build a woodshed in the country with their own hands in stages. Photos and videos are also recommended for viewing.

Helpful information! Recently felled wood is required to dry thoroughly before using. It is important to understand that if the logs are dry enough, they will not be able to provide the necessary degree of warming up the room when they are used in a furnace or fireplace. As well as wet wood emit more smoke, which contributes to clogging of the chimney.

The important point is not only a place of firewood location but also their storage conditions. Logs in no case should not get wet. Woodshed and Accessories for garden allow for the necessary fuel storage conditions. Data structures put forward some requirements that they must meet.

First of all you need to similar construction was located in a convenient location. Woodshed dimensions are selected individually depending on the needs of the owners cottage or country house. However, the structure must have a sufficient size to accommodate a large supply of wood.

When storing logs necessary to ensure that they are ventilated. Firewood should be well ventilated, so as not to dampen. One of the main rules is that street drovnitsa always performed with a canopy. It is needed to protect the logs from atmospheric precipitation.

Direct effects of sunlight on the wooden logs adversely affect their structure. Such wood dries much and use very fast burn, without having to give a sufficient amount of heat. In addition, drovnitsa must integrate harmoniously with the site design.

Woodshed with their handsHow to choose the right place

When choosing a site for construction, which will store the wood, it is necessary to focus on a few points. First of all you should pay attention to the expected size of structures, which, in turn, are determined by individual needs.

If the need for firewood is limited to the preparation of a shish kebab on the grill, then it is recommended to place the woodpile near the area of ​​preparation of meat dishes. In this case, the choice of construction sites is due to the simple convenience. It is worth noting that you can not have wooden drovnitsu too close to the brazier. The distance must be sufficient lest there be a fire built of wood against accidental spark.

Experts do not recommend to install a woodpile in the center of the plot. This is because such an arrangement makes the woodshed basic architectural structure, where the focus is. Most often, this design is located in close proximity to residential construction.

Among other things, a place for woodshed should be selected based on the fact whether a site is a flower garden or a vegetable garden. Stack of wood, as a rule, has a relatively large dimensions, which give considerable shadow, in the area which can get green spaces.

When assembling the woodpile with his hands need to maximize its availability. It is not necessary placed too close to other farm buildings on the site. It is desirable to pave track. This will provide easy access to the structure during the rainy and winter season.

Firewood must be protected not only from precipitation, but also on the moisture that accumulates in the soil. Woodpile is recommended to place on the hill. If it will be in a depression, then logs to quickly get wet, as in such areas concentrated water after rains. Drovnitsy to give the street with his hands fulfilled in such a way that the lower part thereof located slightly above the soil level.

Helpful information! In order to simplify the selection of the most suitable place for such a design, it is advisable to draw a simple plan of the site. It must specify the house, outbuildings and all other exploited areas. It will assess the feasibility of placing woodshed in a particular place.

Detached woodpile are the most common type. Quite often you can meet with hozblok drovnitsa. In some cases, near-wall construction set, which are adjacent to the home. The choice of location - a very important event that affects the usability of the future structures for the storage of firewood.

Woodshed in the country with their own hands: Selection of the appropriate size of the structure

Before assembling woodshed need to assess personal needs for wood fuel. In the case of an irregular use of firewood (e.g., for cooking barbecue) can manage small design. However, the level in the wood needs may be higher. For example, in winter for heating cottages used fireplaces, therefore wood fuel is a daily necessity. In such a situation it is best to set the volume woodsheds with a good supply of firewood.

As an example, it is recommended to pay attention to the photo stack of firewood, having different dimensions. Small design can accommodate a relatively limited supply of wood, which, however, can be replenished easily. More dimensional structures resembling barns are designed for continuous use of firewood.

In any event, most importantly, what is necessary to be guided in choosing the woodpile dimensions - individual needs. Before installation, it is recommended to carry out an approximate calculation of the size of the structure, as well as explore various photo woodsheds. To give using several varieties of these buildings, as can make visually. It will be guided by a value corresponding to the required amount of wood.

Variety of designs to store firewood

The next step (after calculating the dimensions of and the choice of a suitable place) is the selection of the type of construction. First of all it is necessary to compare the budget with the desired result. In some cases, for the construction of the woodpile used exclusively available means.

Today, there are several types of the woodpile, are worth paying attention to. Each species has its own characteristics, depending on the version. Consider what options are facilities for the storage of logs are the most common.

Carport. This construction is one of the most common. This is due to the fact that it is simple execution. Run a simple canopy for firewood can each with their own hands. Accessories for cottages, made in the form of canopy 3 has only the walls, floor and roof, protecting logs from atmospheric precipitation.

Note! When choosing the variety woodpile it is recommended that the floor is slightly raised. This will ensure the protection of the wood from getting wet from the bottom. Canopy can be either free standing or near-wall.

Pavilions. This design is the most attractive, so its construction will require more resources. Photo woodsheds as gazebos allow to evaluate their benefits. The design includes a door and can be free-standing. In addition, quite often there are buildings of this type, which, in addition to the storage of firewood, perform several functions. In this case, refer to the woodpile hozblok.

Open design. This structure consists of two walls and a floor, which rises to protect wood from getting wet. Classic open woodpile embodiment excludes the presence of the roof. However, some owners still covered with a wood roof. This design is quite simple to make with your own hands. As photo woodshed help choosing his type? Pictures can visually assess the feasibility of a structure.

Sheds. For storage of logs necessarily construct special buildings. Wood can be folded in the conventional shed. But it is worth remembering that this option is useful for a small number of logs, as a place in the barn often employed instruments, old furniture and other objects.

What materials are suitable for the construction of woodshed or drovnitsy to testify

The main material that is used when installing the woodpile, is wood. For the construction of these structures can be used as an ordinary whiteboard and wooden beams. In the second case, the construction looks more presentable. Construction of timber are an excellent solution in the event that the site area is decorated in a natural style.

Often used for this purpose wooden pallets. Woodshed of pallets - simple but effective design. Moreover, for assembly of such structures can take other waste materials, such as metal tubes, sheets, etc. chipboard.

Basic rules used in the construction of such a structure requires everything good natural ventilation and protective canopy. Besides wood and other materials may be used to perform such a structure. For example, popular are sheets of polycarbonate. It is a modern raw material has many advantages and quite democratic value.

Another material which is used for mounting the woodpile is metal. Forged drovnitsy have a presentable appearance, look stylish and elegant. Most often made of metal small structures. This is due to greater weight, as well as the relatively high cost of the material. The advantages of such woodpile include their high strength.

Helpful information! To protect the material from rust, metal products must be painted or treated with special anti-corrosion compound.

With certain skills in construction, if desired, can be collected from any material woodshed with his hands. Photo designs will help determine the choice of varieties. Woodshed is easy to perform and improvised. For this purpose, suitable old boards and other waste materials. If it is necessary to prepare a woodpile for storing firewood to be used exclusively for ignition brazier, then the task is greatly simplified. Under this function, you can adjust the small closet.

Related article:

Woodsheds own hands: Drawing and training tools

preliminary drawing preparation is required if you decide to build a shed-drovnitsu. This design is not only suitable for storing logs, but also for storing tools and other things. Mapping simplifies the definition of the area of ​​the future construction. Footage will help to construct a woodpile firewood with their hands. Photo various assembly steps also contribute to the understanding of assembly principles.

Margin firewood - value which is determined by the individual needs of the site owners. In order to provide heating of residential buildings, a surface area of ​​100 m² require approximately 1.9 m³ dry wood. It is important to remember that different wood species have different degrees of heat. For example, in the case of pine logs they need more to 0.2 m³, and birch, on the contrary, - is less than 0.2 m³.

If necessary, we take the finished drawing woodshed in the country with their own hands. Size is recommended to choose a small margin, because it can always be a need to prepare a larger amount of wood. Structure for storing freshly sawn logs should be approximately 2 times more spacious than the structure for dry fuel, because the heat transfer on the raw wood below 50%.

When choosing a woodshed dimensions should also take into account the characteristics of the furnace. Efficiency of these devices can be very different. For example, modern high aggregates this figure reaches 80%. Such furnaces are processed one batch of wood of about 8-10 hours, greatly reduces the need for wood fuel. After compiling a drawing you need to prepare all the necessary tools to build woodpile:

• bit (for columnar structure);
• ladder;
• conventional hammer;
• hacksaw;
• plummet;
• pliers;
• Rope thread.

Helpful information! Dry wood called logs, which humidity ratio does not exceed 20%.

Respond to the question of how to build a woodshed with your hands, help step by step instructions and video. Purchase of the right raw materials, after determining the species woodshed and drawing the drawing. Scheme must contain all the required dimensions and estimate that takes into account the amount of wood, metal or polycarbonate.

How to build a woodshed on the pier foundation: instruction

This kind woodpile called stationary. To build such facilities need to perform pier foundation. This stack of different reliability and long operational life. In the process of organizing the foundation pit is prepared for each column. The depth of these holes is determined by soil frost line. Subsequently, they concreted, which increases the reliability of the design.

How do woodsheds to the foundation? Concreting pillars is not necessary mounting point. In some cases, just the pit filled with sand and gravel. It is important to remember that the installation construction is strictly prohibited on top of the soil, as the building will not have the proper resistance. Fixing in any case required.

The supports can be made of bricks or foam blocks. Individual elements of the pillars are treated with a solution that allows to provide adhesion to subsequent products. For a compact drovnitsy to give the street not need to use many posts - just four (in the corners). However hozbloka, which includes not only the woodshed, but other devices need more supports.

After the foundation of the organization can proceed to the installation frame future woodshed. The frame is the foundation of the entire structure, so this step is very important.

How do drovnitsu in the country with their own hands (Columnar): frame and paneling

For these purposes, the usual bars fit with the dimensions of 150x200 mm. The individual elements of the frame are fixed to each other by means of metal parts and screws. If desired, for screws joining the boards can be used alone, but they should be sufficiently long.

It should be noted that the wooden frame members is recommended to treat special impregnations that increase the technical characteristics of the material. Compositions of this type provide resistance to moisture and resist the penetration of insects. As used roofing waterproofing material to be folded in two times. Mounting frame is carried out taking into account a predefined drawing manufacturing woodsheds the country. With their hands to collect a similar design is not very difficult, but you must be careful.

frame elements arranged in a vertical plane, set by a building corner. It is important to remember that there is a sequence of mounting studs. This process is performed in the following order:

• rear rack;
• side;
• front.

The next step is cantrail carcass structure wooden elements. To understand the nuances of the installation clearly help photo drovnitsa outside to give (at various stages of assembly).

After installation of roof system for future roofing can proceed to the formation of the doorway. This will require two to fix the appropriate size of the beam at the desired height.

Note!The door is not a mandatory element of the columnar structure to store firewood, but most often it is performed as a precaution.

How do drovnitsu with the foundation: final stage

After assembling the carcass structure it is possible to start plating. The first step is to revet floorboard horizontal beams that are ground floor. Optionally exactly fit the ends of boards to each other. The presence of small cracks is not mounting a mistake - it does not interfere with the operation of the woodpile. In addition, the gap will promote aeration wood.

When selecting the type of roofing is best to stay on the uni-form. This design is characterized by simplicity of execution and requires less material. you can make and gable roof if desired. Decide on the roof option will help photo drovnitsa to testify. With his hands it is recommended to arrange the entrance to a small woodpile visor. This will allow to protect the wood from rain coming at an angle.

For the manufacture of the cap often use end board. It is fixed to the front portion of the roof by means of special dies. Procedure for the organization of the visor as follows: the ends of the plates must be cut (at an angle), then you need to dock the board with them. This operation requires additional fixing, which provide backup.

plating material is selected depending on the individual preferences of the hosts, the budget, as well as the total area concept. The modern market offers a large variety of raw materials that can be used to realize any designs woodsheds the country. Photo designs executed in different stylistic directions, will help you identify the pros and cons of each option.

Most often, domestic master budget and choose the most simple version of plating - board. Cladding frame according woodpile pictures made by means of screws. Step board should be such that a small gap remained between the individual timber components. If the wooden beams, then it is possible to organize a wider gaps (2.5-3 cm) was chosen as the cladding.

If you follow the instructions and study the photos and videos should have no problem with self-erection of such structures. This will allow to answer the question of how to build a woodshed with his hands. The project, drawn up before installation, should include all the nuances.

As the wooden frame members, the facing boards to be treated antiseptic agents and waterproofing impregnation. In order to extend the operational design of the juice, which will store the wood, it is recommended to paint it with paint or varnish. This will protect the wood from rotting and the damaging effects of environmental factors.

Accessories for trim cottages with their own hands: photo

Woodsheds trim is roofed building, which is adjacent to an apartment house, or hozblok bath. This design has several advantages over the woodshed. The main advantage of the construction is that its installation saves finances. Ease of execution of construction it is also considered an important advantage.

Note!Before you begin to assemble the wall woodpile firewood with his hands, it is advisable to choose a place where it will be adjacent to residential construction. The most appropriate option in this case is the northern wall of the house. This can be explained quite simply: in this case, the wood will be protected from direct sunlight.

The very process of the formation of the wall structure is almost identical to the order of assembly of the standard stand-alone option. However, there is one important difference, which is worth paying attention to. Woodsheds adjacent to the wall, is vulnerable to precipitation, flowing down from the roof of the building. This fact requires a special relationship to the construction of the roof of the woodpile. It should have sufficient slant to the water quickly flowed through it.

The slope runs from the wall, which is very important. And this rule applies to facilities that are made close to hozblok or bath. Drovnitsa for storing logs of this type is going quite simple. First of all you must understand the principles of construction of the visor.

Installation of the roof consists of two stages. Should first nail to the top of the structure two panels, which will be located in a horizontal plane. They perform a support function. At the second stage canopy cladding slate or metal tile.

Some people such actions may seem complicated, but the assembly of structures, assuming the frame, walls and roof, requires some effort. Simpler versions can be built in a matter of hours (for example, woodsheds of pallets with their hands).

Setting the frame and paneling are made in the same manner as in the case of a free-standing structure. It should be noted that the near-wall stack of arrangement does not require the rear partition.

Construction of a simple portable drovnitsy own hands

Log holders are essentially a stand under logs. The simplest version of such a construction can be done in just a few hours. Yet it is recommended to make a drawing for the assembly of simple design. Simplest scheme can borrow at any site in the profile. However, in this case it is necessary to pay attention to the dimensions specified in the drawing. They must fully meet the specific operational needs.

Helpful information! Drovnitsu gather to give their own hands can be improvised. Old boards are suitable for this purpose perfectly. Still, it is recommended to pay attention to their suitability. Rotten, crumbling material is not suitable for the construction of a wooden stand.

To increase the strength characteristics of the design should be used, not only the fixing screws, but also aids (e.g., glue). As is the case with bulk storage, it is desirable to treat a small stand antiseptic and moisture resistant impregnation.

Online you can find a lot of projects drovnitsa to the country with their own hands. Photo schemes often include a drawing with all the geometrical parameters. To build such a structure will require special tools and materials.

To set the lower frame supports necessary to prepare two boards, the length of which should be 150 cm. A need also short board 4 by 34 cm. Side strut constructed using 6 bars (4 to 150 cm 2 and 34 cm). Furthermore, it should prepare two boards of 145 cm in size. During the construction of the facilities are used such tools:

• Saw (mechanical type);
• drill;
• set of drills;
• jigsaw;
• building level;
• roulette;
• pencil.

The first step in mounting such a structure is an assembly frame. In order to make the frame, you must perform a few holes in the boards (screw). Further tightening screws is made in the middle support elements. To understand the principle of construction of such support under the logs, it is recommended to study the photo woodshed with their hands from a tree.

You will then need to attach to the frame side rails. Thereafter, through-holes must be drilled through the beam and to fasten them to the posts by means of screws. At the last stage, the upper rungs are fixed to the structure that need to be harmonized with the rear pillars.

Metal woodshed own hands: drawings, list of materials

Today you can not only drovnitsu of wood or cost of materials such as polycarbonate, but also of metal. Wrought iron designs look the most impressive. However, to build a building with his own hands is very difficult, since it is necessary to have knowledge in the field of metal processing, as well as the ability to use welding equipment.

Note! The most common type of metal drovnitsy involves the use of specialized parts. Profiled tube may be rectangular, square, oval, and polyhedral. The most suitable embodiment is the use of metal of which cross section is rectangular.

Shaped tubes may be made of different alloys. For drovnitsy often use aluminum parts. If desired, a cradle for wood can be performed for only 2-3 hours. Before assembly is necessary to make a drawing with all dimensions.

The simplest drovnitsa metal made quite simple. The first step is to prepare the materials from which the individual parts carcass structure will be performed.. For a small stand sufficiently acquire aluminum profile pipe 2.5 m In addition, required to prepare the following materials:

• brackets;
• screws;
• paint (black).

The tools that are needed to install metal woodpile, limited grinder and a tape measure. For precision assembly it is recommended to buy a builder's level, but it is not mandatory device.

Drovnitsa for metal cottages: Step by step guide to building and installing

For installation facilities in the first place it is required of the aluminum pipe to prepare the details of the required size. To this end, it is sawn in half. Next, the cutting arm having the shape of the Latin letter L. It must be divided into 4 parts (60 cm). These items will serve as uprights. Then the second bracket is divided into 4 parts. The length of each of them is 30 cm. And also the same therefrom performed brackets 4 to 15 cm and the same number of pins, which must not exceed 5 cm in length.

Many people are interested in the question of how to build a cheap woodshed with his hands. Videos and photos contribute to this goal. The initial step is to mount the side supports. It is important to remember that the upper part of the horizontal arm should have a length of 5 cm from the bottom of the support which is installed vertically. In order to lock together two of these elements, it should be drilled through holes in them. Used for fastening screws.

After assembly, the side supports have to increase their rigidity. To this end they are joined together stiffeners as aluminum metal of which the segments are used. Woodshed of the shaped tube will last for many years, if you do it correctly assembled.

Further it is necessary to mount the support members. After fastening the legs need to attach the brackets to the rack, lying in a vertical plane. Angle fixing these elements is 45 °. Thus, the assembly is made very simple metal stands for firewood. After installation, you can begin to paint drovnitsy the country. Photos of these structures allow us to estimate their benefits, which include presentable and compactness.

Note! Experts recommend to prepare a place under the counter. Training involves two stages. First, you need to level the ground. The second thing to do - to fill the place of installation of the metal woodsheds gravel and well compacted it. These simple steps will help create a platform for a small metal woodpile.

Features installation of a barn for firewood with their hands: the preparatory stage

Shed in which to store the wood, you can own. All you need to do - set the appropriate tools and materials, as well as a desire. Before assembly, it is necessary to determine the dimensions of the construction, as well as, based on the data size, to find the most suitable location for the economic structures of this type.

Materials for the construction of the shed, woodshed with their hands may be different. The most commonly used wood. In some cases, a combination is made of metal framework and cladding made of wooden planks. In addition, the barn can be made entirely of metal, however, this option is the most expensive, so it is rarely considered handyman.

Preparation for the assembly of this design includes several important steps. The first step is to make woodsheds drawing to give their own hands. Photos ready schemes can be found on the network easily using the search bar of your browser. Of course, the best option is to formulate an individual plan. In this case, the structure will best meet the specific characteristics of the site.

After compiling a schema that contains information about the dimensions of the individual components of the shed for logs, you need to prepare the following materials and tools:

• boards (boards and bars);
• 2 vosemnadtsatimillimetrovoy plywood sheet (2450h680 and 2500h1200 mm);
• felts for the roof (approximately 2.5 m²);
• shingles (2,5 m²);
• screws.

Charted and prepare all necessary for self-construction of the barn, you can proceed directly to the installation. It also consists of several stages, which are recommended to examine in detail.

As the country with their own hands to make woodsheds-saray: the algorithm works

Experts advise to strictly adhere to the sequence of actions during installation of the shed for firewood. The first step in the installation of such structures is the assembly floor frame. For this purpose pieces of wood. They must be sufficiently thick to withstand the load which will be provided to them wood-reserve.

Helpful information! After floor installation checks evenness corners. You can use the construction area. If the frame is uneven, then this will affect the entire structure.

In the next step to the outside of the sex of the frame are attached vertical support pillars. Before proceeding with the fixing of the supporting beams street drovnitsy for giving necessary to check whether the horizontal floor.

Next you need to perform lining the floor with wooden planks. For this purpose, it is recommended to use the cut material. Boards are attached to the support frame using galvanized screws. You will then need to trim the ends of the rafters. The angle in this case is 15 °. Then, the rafters are fixed to the posts and strips total. The distance between the rafters must be approximately 60 cm. This will ensure that competent load distribution.

The next stage of the wooden woodsheds assembly to give their own hands is to organize the roof. In order to make the roof, first you need to perform flooring smaller veneer. He is fixed to the rafters with screws. Step screws is approximately 15 cm. Then follows the felt cover plywood special then possible to start the installation of shingles. It is important to remember that the attachment finish roofing material begins with the lower-left edge of the roof.

How to fold a woodpile: A few tips on the location of firewood

Proper positioning of the wood in the woodpile will significantly increase its capacity. Today, there are several options for storage of wood fuel, which is recommended to pay attention. If the stack of a small size, then the problems with storage of firewood should not be. The same applies to a narrow structure in which the logs are located in one row.

In turn, when folding wood in the woodshed or barn may be some problems with the access to the different series. A large amount of wood is best stored in the following manner: several major sectors and put them in the wood, leaving a passage in the middle. This eliminates the possibility of overlapping wood. Photo woodpile filled with firewood, clearly demonstrate the advantages of different storage methods.

Sector in the dimensional square woodshed should not have more than 2 rows of firewood. Otherwise, access to the logs will be much harder. Rectangular wall-mounted and freestanding versions can be divided into several compartments by partitions. This will allow to distinguish between dry and wetter wood.

How to fold a round wood woodpile right

In some cases, the volume of stored wood is too large. This can become a problem if the storage size does not allow to accommodate a number of such logs. In such a situation it is possible to hold the wood storage on the open terrain. This option is very popular and ubiquitous in villages.

Note!The outer row of firewood in a round woodpile has beveled arrangement that facilitates runoff of rain water.

Thus, the decision is output in the event that fuel volume exceeds the capacity of cabins with woodsheds. Not recommended to open the woodpile is too big, if such manipulation is done for the first time. It is important that it is positioned in a location that is accessible by the sun's rays.

This method allows you to store the wood outside the woodshed. How to make your own hands round the woodpile? Before laying the first row must be done on the ground substrate. For these purposes, used gravel. To ensure correct storage of the radius of the cross used wooden stakes.

Base woodpile circular ring laid. In the center it must be empty space. The result is a closed chain of wood. Next produced stacking the second row. It is important to remember that the second row of the wood should be placed across the first layer (with a slight slope in the middle). Blank center (at least the storage woodpile) forms a kind of core-tube. It promotes good ventilation of the entire structure.

Between the rows of stacked pins. They should have a cross-shaped arrangement. These elements support the woodpile, firewood, and do not let it fall apart. When the structure becomes greater than 1 m, can be filled with wood core (arbitrarily). Next, the layering of subsequent series. For the formation of the last row it is recommended to choose the flat logs. After storage the wood structure is covered from above bark or any other material not interfering with ventilation.

For heating a country house or villa usually wood used. There are certain rules firewood storage that must be followed. Woodshed will highlight the presence of a specific place, firewood and facilitate their use. Before the construction of such a structure is required to chart and choose a suitable site for the facility.