Greenhouse Polycarbonate: the size and price of finished designs

Vegetables grown with their own hands, can bring much more benefit than those which have been bought in the store. That is why many owners of suburban areas tend to purchase a greenhouse, which is an ideal environment for the life of the majority of crops grown in our region. Consider how to choose a greenhouse made of polycarbonate: the size and price structures, as well as the types and characteristics of each type.

Materials for creating a frame greenhouse polycarbonate

Ready greenhouses, which can be found on the market today, are facilities of agricultural destination, the purpose of which - to protect plants which it contains, from adverse environmental conditions environment. Despite the seeming simplicity of these structures, their production is regulated by the requirements and standards that are set forth in IEC 34257 - 2010, SNIP 2.10.0485 and SP 107.13330201. So before you buy one can get acquainted with the detailed terms and conditions that apply to the greenhouses.

Greenhouses are made up of two components: the supporting frame and polycarbonate, which is covered by this framework. With this as a basis can be used various materials such as steel pipes (such as rectangular and square), or thin-walled galvanized profile. Each of these options has advantages and disadvantages that must be considered when choosing.

The advantages of using as a base for greenhouses polycarbonate curved profile can be attributed to the low cost and low weight. But at the same time the strength of the material is not too high, which often leads to the fact that to create a pretty strong foundation requires a greater number of elements.

Furthermore, the production process is required to resort to further strengthen the joints, since the compounds pretty much and not too thick metal (0.5-0.8 mm) can be deformed under the influence of strong winds or other loads.

Steel profile can withstand significantly more severe loading and is highly durable. Almost no natural mechanical loads are not able to influence it, which makes this option more durable. But there is a drawback - the tendency of the material to corrosion and the need for real-time protection against rust.

Price greenhouse polycarbonate, which frame is made of profile steel is much higher due to the complex manufacturing technology. Primarily because of the arc in this case, either one-piece or consist of only a few individual elements. Certainly worthy of attention both options, however, a decisive role will be played by your financial possibilities in this regard.

Useful advice! As a rule, all major manufacturers have samples of carcases. So before you buy should carefully read the multiple-choice, comparing the data on the quality, durability and other characteristics.

The main selection criteria for the frame made of polycarbonate greenhouses

In order not to make the wrong choice, it is necessary to understand clearly what should be the frame greenhouses and what you should pay attention. Here are a few simple tips, guided help you make the right choice:

1. The minimal number of elements of the arc, the stronger will eventually frame. Ideal - tselnognutye arc.
2. The metal profile of rectangular cross section has a higher resistance to stress. Best of all, if the frame has been used profile 20 × 40 mm, as the cross-section of 20 × 20 mm is not always enough, especially if we are talking about the foundation of the greenhouse.
3. In order to be sure that the greenhouse lasts long enough, it is necessary to make sure that the thickness of the metal used for the manufacture of the carcass is not less than 1.2 mm.

In addition to the basic ability to provide comfortable conditions for plants, some models may be further installed lighting, watering and ventilation. If you want to save yourself a lot of trouble, it is recommended to consider the options, which initially provided such opportunities.

What to look for before you buy a greenhouse polycarbonate

No less interesting and worthy of himself polycarbonate, which is used for the production of greenhouses. The selection process should pay attention to a few fundamental aspects, namely, the type of material, its thickness and the presence of the stabilizing layer. Also useful would be to read the reviews, which is better to buy a greenhouse. Closer look at each of these three points.

What type of polycarbonate opt for greenhouse

There are two types of polycarbonate: monolithic and cellular. The second option is more suitable for covering greenhouses, as well as a variety of roofing, because in many ways superior to monolithic.

Polycarbonate - a sheet material which belongs to the group of thermoplastics, consisting of several layers. Between these layers disposed internal webs which provide additional strength and positive effect on the duration of the maintenance period and technical design characteristics generally. So, thanks to this technology, polycarbonate has the following advantages:

• low weight;
• high resistance to changes in ambient temperature;
• excellent light transmission;
• flexibility;
• strength and resistance to various stresses.

polycarbonate thickness for greenhouse

Matter what the thickness of the polycarbonate will be selected for the cladding greenhouses, largely scrolled not only its strength, but also the ability to pass the sunlight, as well as level of thermal conductivity. Generally, the most suitable for this purpose are considered sheets of 4 to 10 mm, since they meet all the essential requirements and standards.

Of course, there is a direct relationship between the thickness of the polycarbonate sheet and some features of the frame on which they are mounted. The denser the materials used, the better the greenhouse will withstand wind and snow loads. In some cases, even the use of permissible sheets of different thicknesses in a single structure.

Since the planar and arched roofs subjected to the highest load, is used for their construction polycarbonate greater thickness, while the fit and a thinner vertical side walls material. The panel thickness 6.4 mm was set as a standard parameter.

Useful advice! Before you buy a mini-greenhouse or a greenhouse full of polycarbonate, it is necessary to make sure that the thickness of the material declared by the manufacturer corresponds to reality. For this purpose, you can use the caliper.

If you find that the actual thickness of the polycarbonate different from the one which indicates the manufacturer, it is best to abandon the purchase. Strongly recommended purchase greenhouse, for which was used the material thickness of 3.5-3.7 mm. Unscrupulous sellers may claim that its higher density and because it can completely replace the recommended 4 mm polycarbonate. In reality this is not so and is likely a major impact on the life of the structure, and its resistance to various factors.

Another way to identify a cheap and low-quality material - try to bend his fingers. Easily flexible material, which often does not refer to which side is stabilizing layer - it's fake, that just do not last for more than 2 years.

Useful advice!The information provided on online forums and sites can help you find the best option. Often, users share their experiences and advise where to buy greenhouses of polycarbonate at an affordable price.

Approximate cost of a single sheet of polycarbonate greenhouse domestic production of 4 mm thick, 2.1 m wide and 6 m in length is 2 thousand. rubles.

The presence of light stabilization layer of polycarbonate for greenhouse

Qualitative polycarbonate characterized stunning light stabilization properties and the ability to completely absorb ultraviolet radiation with a wavelength not exceeding 400 nm. It is thanks to this ability is achieved and the greenhouse effect, which is beneficial for plant growth.

In order to protect the material from the destructive effects of ultraviolet radiation on one of its sides, by an extrusion method, a special stabilizing layer is applied. Verify the presence of this layer on the surface can follow the manufacturer's instructions, which glues the plate with the corresponding information over the protective film.

Useful advice! Seeing sale polycarbonate, on which there are no marks on the presence of light stabilization layer, it should be understood only in the rooms, you can use that kind of stuff, and it is not for greenhouses It fits.

If the sheathing frame greenhouses will be used polycarbonate, without the protective layer, it will lead to the fact that the coating is extremely fast fail. Although attempts to sell low-quality products manufacturers and sellers may claim that the protection is already in the material, in fact, this is not enough. So when it comes to the greenhouse, the presence of light stabilization layer can be considered a prerequisite.

Various forms of greenhouses made of polycarbonate: a photo, price and features

Looking price hothouses and greenhouses made of polycarbonate can be seen that their value depends not only on Performance Materials that were used for their manufacture, but also on the characteristics of the most design. In addition, the important role played by the size of the greenhouse. Consider a few basic types, which are most often found on sale.

Arched hothouse - the most common variant structure which is a structure with semicircular overlapping. The advantages of this option include the fact that by adding or removing individual sections, quite simply, you can change the size of the greenhouse, although this possibility is not provided in all models.

Related article:

Drawings of polycarbonate greenhouses with their hands from a profile pipe

Types and schemes skeletons of greenhouses. Coating materials. Features of the foundation.

Butterfly Design - is the perfect option if you want to buy a mini-greenhouse for the garden. With its small size, this design allows the most comfortable care for the plants, because of its side of the rise. For some of these models is provided thermal actuator which allows you to control the level of ventilation automatically, without human intervention.

Greenhouses with arch droplet form - this is the design most appropriate when faced with a serious level of snow cover. Due to the presence of additional stiffeners greenhouse gives a very stable and the form walls prevents snow accumulation on the surface.

Shed (pristennye) greenhouses - one of the most simple structures, in which one of the pillars stands a building wall. In this case, the angle of the roof is quite large, to prevent the accumulation of snow on its surface. In this case, it is important to place the greenhouse on the sunny side of the building, so that the plants get enough sunlight.

Gable greenhouse - the classic version, which existed long before the use of polycarbonate. Outwardly, it looks like a house of very simple form. not only metal profile, but also the timber can be used for a base structure.

Choosing the most suitable option, the owner must take into account its financial capacity, as well as the real needs. For growing seedlings, you can consider purchasing a mini-greenhouses and greenhouse. You can buy them at an affordable price. If you plan to grow cucumbers or tomatoes, to buy a greenhouse for this purpose you need this size to adults bushes feel comfortable in it.

Useful advice!If free space in the area is very small, you can buy a portable mini-greenhouse for the garden. After the end of the season it can be easily removed or rearranged to where it will not interfere with free movement.

Greenhouse Polycarbonate: Sizes and prices different models

Buyers access a huge range of models and a wide variety of designs to cover all the proposals is simply impossible. For example, consider a few greenhouses made of polycarbonate, dimensions and materials which are characterized by:

Mini Greenhouse Polycarbonate Palram Sun Tunnel	Consists of two parts, requires no assembly. Ideal for growing seedlings	110×50×40	2310
Greenhouse Polycarbonate "Lotus"	The framework of galvanized pipe section 20 × 20 mm. design weight - 20 kg	210×90×80	6100
Greenhouse Top opening "Alyoshenka"	As a base used metal profile square 20 × 20 mm. there are thermo	200×100×85	9300
Arched greenhouse polycarbonate	The frame of the profile pipe section 20 × 20 mm. It does not require foundation	400×300×210	12600
Arched greenhouse polycarbonate	The frame of the profile pipe section 25 × 25 mm	400×300×210	20000
model greenhouse	Description of the construction	Size (l / w / w), cm	price, rub.

In addition to these standard greenhouses on sale you can find a wide variety of polygonal models. Furthermore, you can order the production of greenhouses on individual measurements. Of course, this will be reflected in its price, however, so you can get the design, ideal size and shape.

Buying greenhouse polycarbonate opens up to the owners of summer cottages huge opportunities for growing vegetables, seedlings and other crops. So it remains only to choose the most appropriate and high-quality option, and then install a greenhouse on the site and start using.