A fence of corrugated board with his own hands from the bars: technique, assembly secrets

Install a fence of corrugated board is quite possible with their own hands

Decking: universal quality

Due to the high corrosion-resistant performance, versatility in application, is easy and quick assembling profiled sheets are gaining popularity.

Operating sheeting coated period is up to 50 years. Objects made from metal sheets, pleasant look stylish and modern. Corrugated sheets are widely used in construction: sheds, supermarkets, warehouses, roofs, fences, Canopies, awnings and more.

Related article:

Gate with his own hands. Drawings, photos.Video installation process. Advantages and disadvantages of swing and sliding gates, especially their mounting. Schemes with dimensions and photos.

Due to the fact that the corrugated board is made of roll materials, sheet sizes can be ordered individually. Profile width - 0.98 m to 1.85 m, depending on the manufacturer. The thickness of the profiled sheet affects its resistance to damage and durability. The most used thickness - 0.5 mm or 0.7 mm. For the wall and with their hands sampling devices use sheets with a wave height of 8-20 mm.

Decking is widely used for construction fences for private houses and suburban areas

Another advantage of corrugated board - the variety of colors of execution (30). Select color can be on a scale RAL color standard, focusing on the taste. In places the implementation of metal sheets can always buy a can of paint colors corresponding to processing locations accidental damage or scratches.

Choosing profiled for mounting your hands need to focus available from the manufacturer, so as not to doubt the quality of the material.

3D-construction project fence and concreting the metal bars

Surely everyone in the house has a certain set of tools for production work with his hands. But the work is not stalled due to lack of any of these items, the following is a full list of necessary tools and equipment:

• welding machine - will need to connect the towers with transverse tubes;
• level building - for determining the horizontal and vertical elements mounted;
• Measuring tape - preferably up to 50 m (for data accuracy);
• Metal scissors - in the case of cutting the steel sheet;
• necessary to mark the perimeter - Nylon thread fence;
• Bulgarian - via pipes which are cut and polished docking site;
• Screwdriver - used for screwing screws for mounting;
• benzobur for wells or hand drill - if you plan to use a fence support tube.

flange mounting bars of metal profile method makes it easy to dismantle the old and construct a new fence

A fence of corrugated board with his own hands from the bars: metal supports or brick columns

How to make a fence of corrugated correctly and accurately? Can do it to anyone who loves to equip the territory of their own hands. You can do without attracting masters specialists, to save money and get pleasure from the process. A fence of corrugated board with his own hands, the video which you can see on the Internet - the task is quite doable.

preliminaries

Deciding to make the installation of a fence of corrugated board with his own hands in the first place freed place on the territory of the perimeter. It is determined by the size of the future of fencing. In the corners of the intended fence hammered stakes, which are then connected to nylon cord.

With a tape made extremely precise metering side portion and the total length fence. Outlines the installation site supporting pillars, gates and wickets for passage. To impart structural strength, it is recommended support positioned so that the distance does not exceed between 2.5 - 3 m.

Various embodiments of anchoring in soil columns

Installing the pipe supports,

Supporting metal pipes are installed in the prepared pit. The locations of labels for poles, drilled holes in the pillars of immersion depth. The length of the support tubes is determined by the height calculation fence and recording the depth of immersion. For reliability is lowered into the ground the third part of the total length of the tube. The pits are arranged using a drill around the perimeter of the same distance.

Useful advice!Every time is not a tape measure the distance between supports, you can use the string whose length is equal to the distance between them. This will speed up the process and eliminates the measurement errors.

The yard is fenced by a fence made of corrugated gray

Installation poles on one section of the line must be made solely vertically and ensure that they do not get out of a single plane. Check position of support by using a plumb line or level. The first set of pipe endpoints of one row. With cord spanned the top between the two end supports, fixed height of all the other tubes.

Adjust the height of the pipes can be, on the bottom of the pit pour the right amount of soil. Pipe-bursting support wedges, avoiding their displacement. At the bottom of the well are placed a pad of crushed stone, whereupon the pit is filled with concrete columns. It is important via shtykovaniya remove air from the solution. In this state, you need to keep support for three or four days before the concrete has set. Proper installation of pipes, poles affects the whole structure of corrugated fence (Picture examples confirm it).

A fence made of corrugated sheets with concrete columns

Fastening lag transverse to the supporting pillars

For mounting cross-lag with their hands using square or rectangular tubes. Cut pipe parts required size. The number of transverse rows is set based on the height of the fence. for two-meter fence It is possible to do two rows. Take care that the cross tube located at a distance of 200 mm from the ground and from the support region.

Fastening lag produced by welding strictly an angle of 90 °. Check the horizontal pipes, you can use level, and this should be done around the perimeter of the structure. After Installation of the frame is finished, you must sand the mounting place and primed and painted the entire structure. Video tells how to strengthen cross-lags.

Driving assembly for the fence bars of corrugated board

Installation of profiled sheets

Once the frame is ready, proceed to the installation of corrugated sheets by hand. Profiled intake, with dimensions m 2,0h1,2 sheet type C8, is most suitable for barriers designs. The sheets are fastened to the transverse tube screws for metal sheets of the corresponding color. Profiled sheets joined overlapping previous sheet covering at the same wavelength.

Useful advice!Before you start to mount decking to joists, do at fixing holes with a diameter of one millimeter smaller diameter screws. This will help save time and consumables during installation.

If the land on which is mounted fence, Has an irregular surface, it is taken into account when installing pipes, poles and pouring concrete. The depth of the holes for the supporting columns is adjusted depending on the terrain area. Below are photo fence circuit on the uneven portion.

Arrangement fence of corrugated portion on the slope

A fence of corrugated board with brick pillars

fence of corrugated device with your hands (photo-instructions can be found on the Internet) will be more expensive if the levy metal brick supports. But this type of fence will be more presentable.

With pegs fixed perimeter and tensioned thread. Digging a trench along the perimeter of the strip foundation depth of 0.7 m. The dimensions of the tape base (shrouds) are selected individually. Recommended sizes of the concrete base of 15-20 cm. The bottom of the well compacted.

To avoid deformation of the foundation, is arranged on the trench bottom cushion of sand 20 cm. The sand is moistened with water and compacted.

Various embodiments of a fence with brick columns

Set your own hands wooden shuttering height of 10 cm and a strengthening of its bridges. Then the previously prepared set of frame fittings.

After installation we arrange the formwork-support metal pipe, which will later be overlaid brick. Concrete is poured a solution. Mandatory condition - all metal supports must be in the same plane. Withstands 3-4 days.

After setting the concrete, the metal pillars 90 ° fasten the console. Fastening by means of screws or welding at a distance of 200 mm from the ground and from the upper edge of the pipe. Later on these consoles will be mounted transverse joists. In the photo you can see how the console is attached.

Decking - modern and practical material for decorating the fence

Getting laying brick pillars. The bar is usually laid out with sides and a half brick. To reinforce the strength of each row of brickwork reinforcement tape. The space inside the masonry fill with grout. Finished bars cover with caps, lids to prevent moisture from entering the structure and to give final form. The video below will allow to understand the technique of laying brick pillars.

Fastening transverse joists and corrugated sheets made in the same manner as in the case of metallic pillars.

Useful advice!If fence Profiled sheet is set on the foundation, it is necessary to lay the concrete surface of foundation cardboard. This eliminates the lower edge of the corrugated board from damage.

Drawing fence construction of corrugated metal tubes with a cross section of 60x60 mm and 40h20

Below is a video installation of a fence of corrugated board with his own hands.

If the technical procedure of the fence of corrugated board unit will be maintained, it will smooth and neat.

The extent of the popularity of the use of wall sheeting for installation of the fence with their hands due to the positive characteristics and unique properties of this material. It is equally well with the pillars of the covering of brick and natural stone, can adequately It is combined with wrought iron fence, as well as support in the color scheme of the other buildings on the site. It all depends on your desires and capabilities. And let them have always coincide.