Metal picket fence: Photo neat fences

Fence with double-sided sewing picket

Very popular color, imitating wood. this fencing its natural color is visually reminiscent of a wooden picket fence. The height of the fence from evroshtaketnika selected individually, it is perfectly suitable for framing farmlands, selection of recreation areas, flower beds and flower beds. Photo of the beautiful fences picket illustrate various forms of walling.

In addition to aesthetic appearance, of a metal picket fences have a number of significant advantages:

• universality - fences can be used not only for fixing the perimeter of the gardens, arrangement of gates, gates, but also for the protection of the territory of the administrative, industrial and agricultural complexes;

The design of white evroshtaketnika looks easy and is combined with a light facade house

Features a metal picket fences

Fence evroshtaketnika from going on the same principle as the wooden fencing: uprights, lateral horizontal guides and a metal fence. The enclosure may be formed from two-sided or right sides. Two colors are used often: the bright side of the street and a more peaceful tone on the inner side of the yard.

As for sections of the struts fence You can use metal, concrete or wooden poles. The base may be a belt, a columnar or pile foundation. If you intend to combine a metal fence with brick or stone walls need a firm foundation of concrete or brick. Such a fence is more expensive, but it will look much more impressive.

Installation shtaketin on a metal frame

Get easier and can be expensive fence, using as struts metal hollow pipe with a diameter of 0.6 m or profiled tube of square or rectangular cross section. For reliability pipe installed in the ground and concreted. To fit the guide tube with a smaller cross section profile.

During assembly of the fencing construction evroshtaketnika recommended level for determining the precise horizontal and vertical elements used. From this depends the strength and appearance of structures.

Combined metal fence and a brick

Useful advice!Depending on the overall style of the local area, you can use a metal fence with round or gabled top end or enclose all vertical elements beneath horizontal decorative strip as skate.

To give a fence of evroshtaketnika presentable possible by setting columns of bricks to the fence. Photos available network options will become familiar with varieties of walling.

Evroshtaketnik installed as a "checkerboard"

Metal picket fence: photo design options of fencing

Despite the simple structure, a plurality of proposed embodiments of performance of the metal fence picket:

• corrugating - consists of sections, the upper part of which is shaped like a wave;
• arcuate convex - upper section of the fence has a convex arc;
• a concave arc-shaped - spans fence have a concave shape, where the average strips are very small height;

Two-way fence and looks great from the street and from inside the yard

• model "Wings" - in this embodiment, the top drawing a line reminiscent wingspan;
• "Pyramid" - the span of one section shaped like a pyramid.

Furthermore, evroshtaketnika fence can be mounted on stone or brick plinth. Such a fence looks very impressive and is distinguished by a robust design. Of bars can also be performed Gates. Recently, very often you can see the horizontal position of the fence at an angle of overlap "blinds" type.

Evroshtaketnik is cut metal strip of galvanized steel

Fences made of metal picket fence with his hands

Given the simplicity and ease of installation, the installation of the fence of the fence with their hands not be easy. All accessories can be purchased fasteners and assembly drawing complete with picket fence.

Tools and materials needed

For the construction of structures made of evroshtaketnika need the following tools:

• shovel, hand or electric drill - need for pits or trenches device for tape base;

The most common version of the fence - the brickwork, combined with metal picket fence

From the materials you will need:

• hollow profiled tube with the size of 60x60 mm cross section - given that the section of the metal picket quite light in weight, the size of such cross section would be sufficient for vertical supports;

Useful advice!The longer passage and higher fence, the larger section of metal pillars is applied to the device supports.

• metal profiled tube 20x40 mm - smaller cross-section profile is used for horizontal guides to which is fastened evroshtaketnik;

Metal picket fence with brick pillars

Installing a fence frame

Before proceeding with the installation of the vertical supports, do the perimeter marking for future construction. The territory is exempt from vegetation and debris around the perimeter hammered pegs and between the tensioned cable construction. Further, outlined pillar sites, they are placed at a distance of 1.5-2 m from each other.

The identified locations are drilled or dug pit depth of about 60 cm. Adjustment of metallic tubes for sampling performed by immersing them in the resulting holes, after which the level is checked through vertical and sledge hammer them into the ground for another 40-45 cm. Then pit with pillars concreted. At this stage it is important to check that all the poles were put up vertically and have the same height.

Scheme mounting shtaketnogo fencing

Once the concrete has set firmly, to the vertical support welded metal cross beams. The first guide is mounted at a distance of 30-40 cm from the ground level, the top back of 20-30 cm. Ready frame fence coated with primer and paint in the color of the metal picket, paying special attention to places of welded joints.

Useful advice!To avoid water penetration in the vertical support tubes, each rack must cover a decorative cap of identical color.

Fencing steel picket with the layout in a checkerboard pattern

Fixing metal strips

To fence evroshtaketnika have a neat appearance, it is necessary each bar positioned equidistant from each other. Gaps between the strips of unequal width makes the look casual and immediately catch the eye. So it is important to mark and secure place metal picket location.

If your fence has no cap, care must be taken that the distance from the ground to the lower edge of the fence was sufficient to prevent metal contact with the soil and water, and at the same time to a guard could squeeze small animal.

An illustrative example of fastening U-shaped frame on shtaketin

For fixing the fence only use galvanized screws. In this case, the attachment points are not susceptible to corrosion. Screws can buy the same color as the cover picket. Each band is fixed at four points along its height. Step between the plates individually selected and can be from 1 to 10 cm.

The most common is the distance between the bars of 3 cm. Slats are fixed in two ways: the usual mount - for translucent fencing and chess - for deaf designs.

Metal fence perfectly be combined with other materials

Evroshtaketnik intake: photos, prices of finished sections

Evroshtaketnik can buy from the manufacturers, specializing in the production of such protections. There are two ways of manufacturing metal picket: fencing spans can be are cut from the continuous shaped sheet or manufactured on special equipment - rolling camp.

It is worth noting that the fence, cut corrugated steel sheeting, the most affordable, and rolling products have a well rounded edge slats that promotes longevity, but the price they much higher.

The horizontal arrangement of the fence at an angle by type "jalousie"

Fence evroshtaketnika you can buy ready-made sections or individually. Estimated prices for metal picket fence Unit: single-side coated on 60 rubles / rm, coated on both sides - by.. 70 rub. / Rm. The value of the fence section affects the design height, the gap between slats, means mounting plates and having gates and gates.

The approximate cost of the fence evroshtaketnika consider installing in the tables below.

Evroshtaketnik "Economy": U-shaped profile, fixed to the two rails, the support legs of the profile pipe of 2 mm thick with a 60x60 mm cross section:

A metal fence «Finfold»: U-shaped profile, fixed to the two rails, the support legs of the profile pipe of 2 mm thick with a 60x60 mm cross section:

Online Manufacturers posted a photo with models offered by fencing sections. Finding your way in the price of individual intake structure can be using an electronic calculator online or by calling the manufacturer's advisory service. Quite often organize various events, including a free production of the fence or gate when ordering fences evroshtaketnika.

Many people think of a metal picket fence optimal solution for fencing gardens and suburban areas. The installation of such a fence does not require significant funding costs, fencing can be easily mounted on their own and a chance to prove himself as a designer, combining a metal fence with other building materials.

The one-sided fence, painted in chocolate color

If you do not have skills in construction, or free time you have is limited, it is possible to choose a reliable manufacturer evroshtaketnika and order your favorite model with the installation. Probably made by professionals fence will have a very decent and attractive appearance.