Profiled endures changes in temperature and exposure to moisture
- ease of care - shaped sheet is washable in the usual way, does not require periodic maintenance. In the formation process of installation accidental damage, they can be quickly eliminated by treating the corresponding color paint scratches from a container;
- attractive price - sheet metal profile for fences have reasonable cost compared with materials such as traditional metal, brick or stone.
Useful advice!Choosing decking to fences, give preference to wall plate having a lighter weight and a variety of profile shapes. Such a material has a smaller value than the analogue and roofing as fences can easily cope with wind loading.
Profiled sheet distinguish height and step edges, which affects the strength of the material
Wall corrugated board used for fences, Characterized by the shape profile with a small height of the trapezoid - 8-25 mm and is characterized by simplicity and elegance of the coating. It can be used as a self-enclosing design, and as a background, for example, wrought iron fences.
Profiled intake: size, price sheets
To correctly calculate the required amount of material in the installation of fences made of profiled sheet with their hands, as well as properly plan the spacing between the support columns, you must have an idea of its basic dimensions and markings.
EXAMPLE mounting sheet corrugated on the joists with the land relief
Dimensions of profiled sheet for fences
Sheets of corrugated board, taking into account the configuration and profile height, are classified in separate groups:
- Labeling C - shaped wall sheet used for the construction of walls, partitions and enclosing structures, as well as for decorative surface covering and the insulating walls;
- marking H - bearing steel sheet, used for strengthening the construction or load-bearing structures;
- NA marking - universal metal profile, which has found use in the apparatus of the roof, walls and ceilings. It differs considerably small when the height of the sheet thickness and wave height.
Galvanized sheet surface provides high corrosion resistance
The main difference between the wall profile of the carrier is the height of the trapezoid, and the presence of additional stiffeners. This difference is explained by the use of corrugated mark H in constructions where the load on the material is significantly higher.
The length of the sheets is different depending on the manufacturer and metal sheets ranges from 0.4 to 12 m, but the standard is considered to be the height of 2 m. The following are the parameters most used brands sheeting.
Table 1: Profiled fence for: size sheets:
| Parameters sheet, mm |
Brand profile plate | |||||
| With 8 | With 10 | With 18 | With 20 | With 21 | HF 35 | |
| Overall width | 1200 | 1150 | 1150 | 1150 | 1051 | 1060 |
| Working width | 1150 | 1100 | 1100 | 1100 | 1000 | 1000 |
| metal Thickness | 0,4:0,8 | 0,4:0,8 | 0,6:0,7 | 0,45:0,7 | 0,4:0,7 | 0,5:0,9 |
| wave height | 8 | 10 | 18 | 20 | 21 | 35 |
| The distance between the ribs | 62,5 | 45 | 91,67 | 137,5 | 65 | 70 |
Useful advice!Assembling profiled sheets made overlapping thus it is necessary to more fully cover the edge of the rib edge with a lower edge.
Profiled sheets for fences: the price per sheet
Cost shaped sheet will depend on several factors: the thickness of the metal, the shape of the profile and the type of protective polymer coating. With increasing thickness of the metal increases its cost. For example, the price of corrugated 0.7 mm thick sheet is higher than 0.4 mm by about one third.
Structural strength of the material gives it shape in the form of a corrugated profile
Quite a budget considered galvanized steel sheet. Zinc coating makes the material resistant to corrosion compared to conventional sheets. In turn, corrugated coated has a greater degree of protection, but its price is 30-35% higher than galvanized.
Related article:
Fences made of mesh gitter, fences Rabitz. Photos successful variants. Photos structures, their characteristics. Gitter grid for the fences. A fence made of mesh netting with his hands. Fences from plastic mesh.
Regarding the form of the profile, the higher it is, the rib larger and higher load bearing capacity of the sheet. Accordingly, the cost of such material will be more. The figure indicates the metal sheets in the marking wave height in mm. For devices made of profiled sheet fence with their hands are used mainly wall profile, which is considered to be the most economical, rarely used profiled roofing.
Below are approximate prices for popular kinds of steel sheets from different manufacturers.
Table 2: Price metalloprofilnyh sheets fence ":
| Brand, manufacturer | Mark | Type of coverage |
Metal Thickness | Sheet width, mm | Length sheet, mm |
Price per m², rub. | |
| total | working | ||||||
| Grand Line Optima, Russia | C08 | no | 0,4 | 1200 | 1160 | 500-8000 | 209 |
| Grand Line Optima, Russia | C08 | polyester | 0,35 | 1200 | 1160 | 500-8000 | 232 |
| Grand Line Optima, Russia | C08 | polyester | 0,4 | 1200 | 1160 | 500-8000 | 239 |
| Grand Line Optima, Russia | C10 | no | 0,5 | 1180 | 1150 | 500-8000 | 318 |
| Grand Line Optima, Russia | C10 | polyester satin |
0,5 | 1150 | 1110 | 500-8000 | 350 |
| Grand Line Optima, Russia | C08 | polyester | 0,4 | 1200 | 1160 | 2000 | 577 |
| Grand Line Optima, Russia | C21 | polyester | 0,5 | 1051 | 1000 | 500-12000 | 698 |
| Grand Line Optima, Russia | C10 | polyester | 0,5 | 1180 | 1150 | 500-3000 | 742 |
Useful advice!Not to overpay for the brand when buying a sheeting material can be purchased from the lesser-known, but producing high-quality products manufacturers. Pre-worth reading reviews and recommendations.
Fences made of profiled sheet. Photo design of modern fencing
Given the huge variety of color schemes profiled sheet fence can pick up in any pick-me shade. The most commonly used color for fences brown (chocolate), green (moss green), cherry (red wine), fencing of these colors look bulkier and aesthetically pleasing. Very popular profiled sheets formed with a texture which imitates wood or granite.
Railing made of corrugated board does not require extra care
A separate group of fences can be distinguished from corrugated board that is combined with wood, stone, brick or metal. Ability to combining metal profile provides unlimited possibilities for the manifestation of designer fantasies. often fences use a combination of several types of material such as bricks, forged elements and profiled sheet.
By classical variant of corrugated guardrail refers to the columns of natural stone or brick according to the architectural construction infield. Due apparatus concrete plinth, the ground portion of which is coated with a suitable material such fence It has magnificent appearance. It should be noted that the apparatus necessary for the foundation fence with brick pillars. For example, you can see the photos of fences made of profiled sheet, with brick pillars.
Fence of corrugated famous quick installation and the possibility of re-use
To design of brick or stone looked pertinently important to choose the right color sheeting. For example, with burnt brick is combined steel sheet oxide-red color group or color terracotta. If the poles are faced gray parapet and natural stone, the composition can be supplemented with a bright-colored aluminum sheet or floorings with a dark gray coating.
Quite interesting solutions fencing, decking which is enclosed in a metal frame or framed by special strip on the upper edge. Covered with a strip shaped sheet more reliably protected from corrosion. The presence of reinforced sections in the fence makes it almost unnoticeable design gates and wickets. Such fences They have a neat finished appearance.
A sectional metal sheets easier fence positioned on an uneven surface portion
Not so long ago appeared on the market decking for the fences with shaped upper edge. Figure sections of these barriers has a shape in waves or peaks. Design of such a fence is as close to the traditional wooden fences embodiment. Note that the integrity of the corrugated sheet in such a fencing is not disturbed.
Elegantly look fence of metal sheets, metal decorated with carved or forged elements. Lacy patterns of metal pads can not only decorate the fence sections, but also gate with a wicket. Selected beautiful color background corrugated forged profitable emphasize composition and make a unique fence, retaining the shape of the structure.
A fence of corrugated board with the framework, timber-framed
Today, you can buy ready-made wrought-iron ornaments in building retail outlets. Selecting pattern on its own taste can weld these elements to a metal frame made of profiled sheet fence section. Use the photo for inspiration fences made of profiled sheet with his hands.
For a complete understanding of the stages of construction, check out the video of fences made of profiled sheet with his hands.
How to make a withdrawal from Profiled
To learn how to build a fence of steel sheet with your hands you must learn the basic characteristics and properties of corrugated board, see examples of installation walling. The Internet contains numerous stories about how to build a fence of steel sheet with his hands. Video gives detailed information about the stages of work.
Fence of the unilateral corrugated sheet 3 m
A fence made of profiled sheet with his hands. Preparing the material and location of the installation
Before embarking on the construction of the fence is necessary to make a correct calculation of the required material with the main fence parameters: length, height and design of the fence as a whole. When calculating the number of corrugated board is taken into account their overlap mounting method, the size of which ranges from 3 to 10 cm.
The perimeter portion is cleared of vegetation, debris and leveled. The corners are driven portion wooden stakes, between which the cord is fixed. Are marked by the installation location of doors and gates is determined by the pitch between the supporting pillars. Traditionally, it is from 2-2.5 m to 3 m. In these places, are driven intermediate pegs.
Profiled sheet well with concrete or brick pillars
Methods for installing poles for the fence with his hands
Installation supports two types of bases may be used: a tape, which is arranged beneath the trench around the perimeter of or separate (local) for each base support. To find out how deep to bury the pillar for a fence is necessary to have an idea about the type of soil on the site. In the case of clay soils make a hole of 0.9 m, if the soil is loose - 1.2 m.
How to set the pillars for the fences? Before installing the bearing on the perimeter of the corners, the bottom of the pit is covered with roofing material. When all the poles are installed on top of the edge of the pull cord construction, thus verifying the correctness of their installation height. Between the corner posts disposed intermediate supports, keeping the distance between the posts of the fence is 2.5 m.
The circuit assembly of corrugated fence
After installation of the supports in their pits poured crushed brick, stone, well tamped, poured water and concreted. Then aged two weeks to complete the setting. While the solution is not yet frozen, check the verticality of the installation of each column and, if necessary, to align the position of the racks.
Installing a fence made of profiled sheet with their hands, many people prefer to use screw pillars for a fence. The upper part of these supports is a tube of square cross section, and the bottom is formed as a spiral pile. Thus, this support easily set by screwing up until the circular portion engages the ground. And with a square upper part of the pipe which is butt any fencing elements.
Metal profiles may play a role as an independent intake and integral part of the fence with brick masonry
If you plan to fence with brick pillars, after the support they will be installed and concreted them draped brick. In this case, it should be noted that if the tape does not suit the base, then under each pillar of bricks required to make a separate foundation.
Installing horizontal rails and fixing sheeting
Attaching guides lag to produce poles via a weld joint. The number of horizontal guides depends on the height of the fence, and the distance between adjacent cross-members is 1,5 m. After all the logs will be welded should be thoroughly clean and paint docking place for metalwork frame.
Beautiful design options stationary fence will be a combination of wood with metal profile
The assembly of the gate and the input gate to begin the manufacture of frames, which strengthens the structure by diagonal webs. To impart stability of the structure rack gate and gate interconnected lateral beam. Finished frames of doors and gates is fixed on the supporting pillars and sheathe profiled sheet.
Fastening corrugated sheet by means of screws corresponding color. Lap joints sheets covering each subsequent sheet of a next wave. Skin start from the gate in both directions. Recommended spacing between screws - two-wave profile.
Driving device gate of a metal corrugated sheet
Useful advice!Time-saving installation and efficient use of materials will help to pre-drill holes in the metal rails in all the places where there are screws.
Using the advice of professionals and video Installation of fences made of corrugated board, you can manually mount a beautiful and sturdy fence design on his farm site.
