Top photo finish inside the bath and a description of milestones

Interior steam room with a nice combination of wood, stone and steel

The best option is for the inner lining trim. It has excellent medicinal properties, the material is safe, different aesthetic qualities. The raw materials for it, it is optimal to cedar and lime, perfect and larch. But pine battens should be used to design a waiting room only. The combination of a variety of wood will make a definite highlight in the interior of the bath rooms.

Proper lighting is well emphasizes the natural beauty of natural materials

Useful advice!To get high-quality and original finish, it is undesirable to use the same timber in different rooms.

Rules finishing floors in the bath

Traditionally, modern bath finish inside the photo that will appeal to begin to carry out from the floor. For guys it expedient to raise a little. It is desirable to do in order to protect the premises from unwanted drafts, providing better heat savings. Floor tile is performed, although it is quite suitable and boards, as well as decking.

Shelves in the steam room It is produced without the use of metal nails

The temperature at the floor surface is not above 30 ° C, so the blister layer may be concrete, earth or clay. The basic rule - the organization as quickly as possible withdrawal of water space. To ensure the safety of movement required to cover a subfloor coating made of cork can be fibrous mat, a wooden flooring. Also it fits perfectly polished tiles or board.

Related article:

Ventilation in the bath with his hands: how to make correctly. Why ventilation in the bath, how to make the ventilation in the bath alone, the principles of devices, schemes, instructions, photo, video materials.

The process of resettlement wood floor is quite simple. First stacked lags further performs stacking planks. Lags laid on brick pillars, which are located on the basis of the draft.

Special panels for saunas have excellent performance and look great

Selectable lag size varies from 20 to 25 × 20 × 25 cm approximate meter mounting step, since the floor will not experience considerable loads. For flooring is used edged, better decking. The wood used must have a thickness of about 30 cm. All material must be treated beforehand antiseptic substance that will protect against the spread and propagation of the fungus mold.

Interior bath a spacious lounge

If a tile is chosen for arranging the floor, the next installation process. Pre-made floor screeds, the surface should be perfectly flat. Secure the tile on a special adhesive. To handle the seams, apply water-resistant grout, which helps protect the material from the mold.

In the interior of the steam room is not necessary to use resinous wood

Subsequently like is necessary to lay the flooring panels or wooden low lattice which then, after each bath procedure, will pass outwardly to drying. This is to prevent possible skidding on a wet surface.

Useful advice! Sex in the bath have to do with a slight slope, then the water will be good for it to drain, and not stagnate.

Photo finishing baths inside and milestones

Popularity lining due to the fact that with it solved two problems simultaneously - wall decoration and insulation of buildings.

Position location for the furnace must be made of non-combustible materials

This material is made of wood, it is an ideal paneling. Decorated with clapboard walls look nice. In addition, visually, the board align any surface. This is the best version of the wall design, as it provides excellent ventilation all other materials. Molded allows walls to freely "breathe", it does not allow the appearance of condensation and therefore mold.

It is considered to be the most optimal lime board. This material finishing technology is simple. Initially linings are entered in the steam room, where the material is adapted to the microclimate of the premises. If the walls are differences, they are aligned rails.

Of metal furnace must secure itself wooden panels to avoid burns

Joints and cracks thoroughly zakonopachivayut. Operation starts by mounting lath performed from the rails. They are attached to the walls on half-meter distance. Initially, the most extreme nailed the bars so then they lock the thread, which will serve as a guide for fixing the remaining strips.

Although the presence of a flat wall surface, crate can not be mounted. In this situation, the lining material is fixed directly to the walls. However, this embodiment interior trim tree will be strong, durable, and beautiful, only if perfectly flat planes of the walls.

Thermometer and clock are necessary functional components in the interior of the steam room

Attaching lining

After completing the preparatory stage, begin the process of finishing baths inside - photos will help to orient in the order of action. It is necessary to find suitable fixing elements made of materials which are not harmful effects of moisture and heat. Immediately forget about the traditional nails because they will quickly corrode, rust streaks walls deteriorate. And when the temperature rises in the steam room, to touch the nails is dangerous - they can burn the skin.

Battens cut from size, focusing on height bathAnd then secure it to the preformed grille (or directly to the wall) by special clips. If necessary, the width of battens can be slightly undercut in corner joints.

Lounge in bath, The place where the greatest amount of time is carried out

To furnish steam quality wood should be used that can withstand high temperatures and high humidity indicators.

All actions must be carried out with the help of a level to produce a perfectly flat structure. After manufacturing the carcass is coated with an antiseptic. It should also be treated battens, but even before it is installed on the frame. Stacking material starts from the corner. As used fixatives nails, staples and clamps. The material, which was used for the finishing surface of the walls, it is possible to apply for registration of the ceiling.

Blond wood species are best suited for small-sized rooms

It should be understood that the ceiling keeps the maximum temperature, which is why choosing battens for this surfaces should be from sawmills, in which a small amount of resin, or they may drop the fall burn the skin. Furnish the place where the stove, you need to perform a non-flammable materials will stand - tiles, bricks.

Useful advice!For the steam room is not recommended to choose a fir or pine. Better this material obbit dressing room.

The floor in the bath can be made of non-slip tiles

Warming and wall insulation

Internal finish bath also includes address the issue of warming the room. Sometimes, experts recommend the use of mineral insulation. He laid under the crate, but everything will depend on the type of load-bearing structure of the walls in this matter. In that case, if the room is made of stone or concrete blocks, it is better to do without a heater, or when necessary to solve the problem of substandard ventilation.