Wallpapering the two species (photo 36): the secrets of beautiful combination
Table of contents
- 1 Why combine?
-
2 Horizontal or vertical
- 2.1 horizontal striping
- 2.2 vertical striping
- 3 Select accents: the color and relief
- 4 Gluing process from A to Z
- 5 Summing up
- 6 Photo Gallery
Pasting of walls of the room - the most important part of the renovation. On the choice of coating depends on the atmosphere of the room and the overall interior appearance. Sometimes, to create original designs you want to apply several types of fabrics, but how to use a combination of both? So, Wallpapering two types - the theme of this article.
Why combine?
Sample Wallpapering
If you think that such a design method, as an alternation of paintings - just the idea, designed to create extraordinary and original interior, you're wrong.
Decorative role of these techniques only hides their practical application - eliminating the drawbacks of the room plan.
When you need a combination of:
- When it is necessary to give the dynamics of a large plane, using alternating textures. For this selected background color, which are superimposed and various drawings.
- Correction of the room can be carried out with the help of color. To do this, use a cloth of contrasting shades.
- If the room has a high ceiling and a small area, the horizontal striping is applied.
- To divide the room into functional zones usually use different shades of fabrics.
- If the room is too stretched (length and width of proportion), the vertical striping helps.
- When the architectural design plan requires the allocation of elements, use textured background.
- If there is no indoor spaces between the opening (door arch) and their required combine one shade fabric is used, but different textures.
- To give one of the walls of the key elements of interior status, you can use accent selection.
We have considered almost all possible types of wallpapering. Now let's get acquainted with each separately.
Horizontal or vertical
horizontal striping
Conventional interleaving: the bottom band pattern on the top
Dividing walls horizontally - the classic decorative technique. It is used in cases when the room has enough high ceilings.
Traditionally, the wall is divided in the ratio 1: 2, wherein optionally, to a smaller part of the bottom. In contrast, at high ceilings desirable to dock a line in the upper third plane.
To hide the separation line between the sheets and impart additional decorative effect is generally used trims, moldings and curbstones.
Important to Wallpapering horizontally conducted using layers of equal thickness. Border can be glued at the top or to cut into the canvas.
Alternation of shallow background - Monogram
Typically, when the horizontal walls pasting use proprietary combinations called wallpaper companion.
Such combinations will fit perfectly in almost any interior:
- On top of the wall - paintings in monochrome or small patterns, the bottom - with stripes.
- Bottom - monochrome or small patterns on top - stripes, monogram, large flowers.
- Top - monochromatic webs, bottom - figure, large flowers (in the ratio 2: 1), or vice versa.
Wallpaper pasting meter horizontally makes the process more convenient. You 2 times cut a job on a cutting individual bands, and the joint between the sheets will only be in the middle.
vertical striping
Vertical striping colors and textures
Another common technique of gluing fabrics - alternating vertically. The main reason for using it - the need to increase the height of the room or the proportions of the correction is too narrow room.
Now the interior is not accepted make furniture, so open walls require dynamics, which leads to the use of a combination of different types of coatings.
It tells the repair school - Wallpaper with a vertical alternation may take place in three main scenarios:
- Symmetry around. To smooth the excessive length of the room, at the center of an elongated wall glue bright broad bands, dramatically different from the basic background of the room. Now look will take the width of the room is the width of the bands.
EXAMPLE asymmetric interlace
- Asymmetric combination. Select one of the walls (it should be longer than adjacent) in the same manner. On the opposite wall is pasted more asymmetric bars closer to one of the corners.
Now the room not only looks shorter, but wider, and the surface have gained some momentum.
By combining the vertical carried sticking butt. This is especially important when combining two contrasting walls, in this case at the interface using alternating colors used for interior decoration. This erases a sharp line and gives a special decorative effect.
Note! Alternation does not apply a special bonding technology. Typically, color and texture is alternated by one or two bands.
Select accents: the color and relief
Bright color combinations in the interior
Three more interleaving method different types of coatings:
- selection color or texture;
- emphasizing the entire wall;
- insertion of the webs.
Thus, using trim darker than the background, the hue can be advantageously emphasized niche or ledge in the wall. Particularly noticeable this method is by using the background color colorful canvases, masking relief facilities.
Isolation of the wall several separate bands at different contrasting color combination is also an excellent way decor. In this case the order of wallpapering is not different from the usual.
Using this technique it is advisable if:
- you need to draw attention to some parts of the interior;
- you need to select piece of furniture or make the background for a beautiful picture;
- required separation space into functional zones.
To create dynamics in the interior is recommended to select one of the walls in the room the other relief, but Use only companion paintings, executed in the same colors that the room is not visually lost area.
Note! To reduce the size of the room (if it looks too large compared to the furniture) you can paste over one or more walls of contrasting fabric.
Inserts - a great way to decorate a room without the use of paintings and design accessories. Suffice it to paste over bright background fabric pieces with a different terrain and place them frame.
And Wallpapering on hardboard does not require a background, decorate hardboard base with bright textured canvases under a stone or a brick and get the design in a loft style.
Gluing process from A to Z
Combined wallpaper in the nursery
Experienced designers combine all the methods we have described in the article, in order to get the original interiors.
If we consider the steps wallpapering, development plan surfaces pasting should take into account the alignment walls.
Now you know how to paste over the room different wallpaper, and are ready to apply their knowledge in practice.
Summing up
We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.