Can I hang wallpaper in the water-based paints (vodoemulsionku)

Can I hang wallpaper in the water-based paints (57 photos): surface preparation, the necessary materials and pasting

X

Table of contents

  • 1 Determine the type of foundations
  • 2 Prepare the surface
    • 2.1 Removing paint
    • 2.2 Sealing cracks
  • 3 A few tips
  • 4 What is necessary
  • 5 We begin to glue
  • 6 Summing up
  • 7 Photo Gallery

You want to make your apartment fashionable and beautiful, refreshing interior design? We decided pokleit wallpaper, because that is the most convenient way to finish, but faced with the question - is it possible to hang wallpaper in the water-based paint? If the answer is - yes, this article is for you!

whether it is possible to hang wallpaper in the water-based paints

Determine the type of foundations

To determine what type of paint colored wall, try to take some of the decoration on the wall with a spatula.

Oil paint is usually sufficient simply disappears from the surface, forming a whole layers. But painted with enamel or acrylic paint wall hard enough to clean the old finish.

Whether to completely clean the wall before pasting? Of course, it is desirable to completely remove the old paint, repaired all the fine cracks, cleaned of dirt and dust as well as putty.

All of these operations require time and additional costs, so most home owners simply grind painted walls and cover them with a primer.

Prepare the surface

The surface requiring preparation

The surface requiring preparation

When you finally make sure that your wall is painted with latex paint, start preparatory work. Treat the entire surface of a large sandpaper, it will remove the cracked paint, dirt and dust, as well as provide the basis for strengthening the soil composition. In DIY stores you can also buy special scrapers, allowing the paint to remove easily.

Removing paint

  • After thorough cleaning the walls of preparing a primer and cover her whole face. High-quality primer allows you to create optimum conditions for pasting the walls and a solid basis even heavy cloth.
  • Priming compositions prevent occurrence of molds under a layer of finishing and improving the adhesiveness, and when combined with a quality glue ensure long life of the coating.
  • If you decide to prepare a thorough surface layer of the wall paint can be washed away using a conventional hot water and a cloth. This is possible if the layer is sufficiently thin.
  • Water should be changed frequently to remove paint chips do not remain on the wall. Before starting any work, let the wall dry.

Sealing cracks

After removal of the coating materials must be sealed all the cracks. This will help us to putty. If you need capital alignment of the walls, for example, in the preparation of a natural or linen fabric, have a total area of ​​grout.

In this case, you will need the right length from 0.5 to 1.5 m. The evenness of the wall is very important in bonding some types of fabrics, such as fabric, but not too picky about the texture sheets base.

Liquid wallpaper can be applied to almost any surface, while hiding all the cracks and bulges. Thus it happens Wallpapering in the water-based paints.

A few tips

  • To create a more solid foundation for heavier types of cloths can paste over the special plane of the facing paper.
    Make sure that the seams of fabrics and paper are not the same. Start gluing paper with half its width.

Note! Previously, instead of paper used old newspapers. This option is still quite good, especially if minor flaws finish will not be noticeable.

  • Primer painted wall

    Primer painted wall

    Before mounting the wall, painted with paint must be completely dry and clean.
    Priming may be used as a special solution and the adhesive mixture. Mix primer and adhesive in a ratio of 1: 1 and handle plane. This will strengthen the wall well enough.

  • If you decide to glue the sheets to the oil paint (this option is particularly common in the kitchen), you have to processing plane or take a similar manner from the surface of the paint strips located at a distance from each other.

What is necessary

finished roll

finished roll

First of all, prepare everything you need for a comfortable and uninterrupted work.

If you do not want to be distracted from the pasting process, slice the roll into pieces of desired size. Typically, this length of the wall and the margin several centimeters, which will disappear during shrinkage fitting or used in adjacent sheets. Unnecessary portion of the web can always be cut with a knife or spatula usual.

Spread sheets on the floor face down and can spread their glue.

Pay attention to the labels on a roll. Some paintings require adjustment pattern, so cut the roll in a row will not work. Others may have a repeating pattern or a light stick 180 ° relative to each other.

We begin to glue

sticky non-woven wallpaper - smearing the wall with glue

Glue nonwoven sheets - smearing the wall with glue

So, everything is ready for the final phase of work. Take the finished web and apply the adhesive on its back side.

Carefully spread the composition over the surface using a special roller or brush. Move from the center to the edges of the sheet. Make sure the glue is not got to the front side.

Leave the cloth to soak for 5 minutes, for a better impregnation can fold it in half, or accordion.

Before adhesive wallpaper draw a vertical line using the benchmark level.

Gluing the first web start exactly from this site walls and the remaining bands stick butt.

Now you do not ask questions, whether it is possible to hang wallpaper on vodoemulsionku and boldly proceed to the repair of your own apartment.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.

Photo Gallery