Repair bathrooms with their hands: how to begin finishing the bathroom, the estimate

click fraud protection

Repair bathrooms with their own hands (39 photos). Installation of pipes, electrical wiring. Finishing the ceiling, walls and floor

X

Table of contents

  • 1 The sequence of work
    • 1.1 pipe installation
    • 1.2 Wiring
  • 2 The ceiling and walls
  • 3 Floor
  • 4 Summing up
  • 5 Photo Gallery

Repair bathrooms with their own hands can be considered a test of construction and design abilities. If you're ready, let's answer a few questions.

  1. What do you want to change in the bathroom and toilet.
  2. How much you expect.
  3. This is a cosmetic or major repairs of bathrooms and redevelopment.
Repair bathrooms with their own handsAnswer? Move on.

Performing work in the bathroom, it is important to remember the high humidity, temperature and vaporization.

First question: "Where to start repair toilet?". The answer depends on the list and the scope of work. If you want to update the paint and whitewash, start cleaning the walls and ceiling. When larger changes defined scope of work, and the estimate of.

Tip: if you have a small bath and toilet area, it makes sense to combine these two rooms into one. Through this reconciliation we increase the usable space. But if the apartment is home to more than 3-4 people, before deciding on such a serious step, it is necessary to think all is well.

The sequence of work

pipe installation

Overhaul of the bathroom and begin to replace the sewer and water pipes.

The quality of the installation depends on the future peace of mind for you and your neighbors. For the independent performance of works it is necessary to buy plastic pipes for water and sewage.

Sewer connect with rubber gaskets, water - special soldering iron. After assembly the quality of water is required to check the connections. Also, when replacing the pipes immediately set the counter to the water and a few taps to quickly shut off water in emergency situations.

Making repairs bathroom with their hands should be a clear plan placement of plumbing and appliances, consider water supply and sewage.

Wiring

Repair combined bathroom

Example bathroom design

After installing the wiring tubes proceed to replacement. For this we need a 3-wire cable with a cross section of not less than 4 mm, corrugated plastic for wire, floodlights or lighting fixtures, fan.

  • Making the layout of the room, taking into account the location of lighting fixtures and sockets. The chisel repaired walls or wall chaser beat Stroebe, the wire is passed through a corrugation and hide in the walls.
  • For the lighting of the room can be used spotlights mounted in the ceiling or light fixtures mounted on walls.
  • In combination bathroom, we recommend installing the devices for forced ventilation of the room, the fan. Power and size is selected depending on the area of ​​the room. The larger the room, the more powerful device.

Tip: hood set in the ventilation shaft. Connect the fan can switch to the light, so as not to make an extra outlet.

The ceiling and walls

The ceiling and walls of the bathroom are exposed to moisture and steam, so the material using waterproof, resistant to sudden temperature changes. Wash off old paint and whitewash, shoot down tile. Line the walls with plaster or putty.

If the area allows, it is possible to use a moisture-resistant drywall. We treat the surface of the primer (for antifungal prophylaxis and bonding plaster) and wait for the complete drying. Walls are ready for further work. As you can use washable wallpaper, paint and ceramic tile as a finishing material.

Making a joint bathroom renovation, do not be limited to a choice of one color. You can use this for different colors and materials, dividing the room into zones. As the saying goes, the owner - a gentleman, fantasize and embodies the idea of ​​repairing the bathroom to life.

we need to tile laying:

  • tile;
  • glue or cement;
  • level;
  • special spatula for applying the solution.

On the floor lay out the pattern and according to it we put the marks on the wall, pre-set the level. Glue is applied to the back of the tile and pressed firmly against the wall. One should start from the floor, gradually climbing up.

Making repairs bathrooms with their own hands, we have to choose their own materials and design of the room. For the ceiling in this room is better to use water-resistant drywall or plastic panels. These materials are easy to maintain and is resistant to moisture. They are fixed to the frame, assembled from metal profiles. Do not forget to pre-cut holes for fittings.

Repair of bathroom and toilet

The contrast of colors - design solution

Making repairs small bathrooms, you can visually enlarge the space. To do this, use a mirror design and bright colors of finishing materials.

Floor

The floor in the bathroom, it is desirable to make heating. For this purpose we use a special coating electrically or make removal of the central heating pipes. As a floor covering can be used linoleum flooring, laminate flooring or tile. In this case, the starting point will be the price of the material and its appearance.

As you can see, repairing bathrooms with their own hands a responsible and time-consuming, but the end result is worth it.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.

Photo Gallery














instagram viewer