Wall covering with plasterboard is the most convenient way of finishing the room. With the help of this material, a person can straighten the walls with his own hands, and not harm his relatives, because gypsum cardboard belongs to a number of environmentally friendly goods for repair work.
- How to properly wall plasterboard
- Learning how to properly wall plasterboard with your own hands
- How to drywall plasterboard walls: types of material
- Instructions: how to properly wall plasterboard with glue
- Step by step: casingWalls as drywall( video)
How to properly wall plasterboard
Following the advice of experts, you can avoid the most common mistakes.
- Before starting work, you need to prepare the necessary tools so that you do not waste time searching for them;
- It is better to inspect the work wall in advance in order to choose the correct way of fixing, and buy the required materials;
- Also, experts recommend correctly aligning the walls to avoid bending the material, which can damage it.
Gypsum boards have a large number of advantages - an affordable price category, this material allows you to reach a smooth surface of the walls, using a small number of sheets and applying a little effort and skills. Drywall belongs to the most environmentally friendly material, it can be used in any room, even children's room, because when contact with this material there can not be an allergic reaction or the child can not get injured on a smooth surface.
It is impossible not to mention the properties of moisture resistance and fire resistance, which allow you to feel more confident in the house. Gypsum boards are easy enough to install, if you follow all the rules correctly, you can do without the services of construction companies or a master and do such work yourself.
If damaged, you can replace a certain part of the element, saving money. In addition to many advantages, this material has its drawbacks: it is fragile enough, therefore, transportation must be carried out very carefully so as not to damage the sheets, because they are sold in large enough sizes and can crack in half. Also, after installing it, you must be careful, because if the wall is damaged by any furniture, there may be a small but noticeable dent.
An alternative to gypsum plasterboard in this case is plaster, it is easily sealed in case of damage, without special efforts. The second no less important disadvantage is the complexity and accessibility of people to hidden under the material communications. In case of serious breakdown, it is necessary to remove one or more plates and also a high probability of their complete replacement after removal.
Learning how to properly wall plasterboard with your own hands
Before you start, you must first cut into the necessary amount of drywall, and should also take into account the place of joints, corners.
Specialists give advice on proper pruning of the material:
- First you need to take a clerical knife and make a gypsum cardboard cut on one side;
- The material is then bent along the cutting line;
- The last step is to cut from the back.
To create a variety of structures from gypsum board, it must be cut not directly, but in a semicircle, or make various undulating parts. For such work it is best to use a hand saw, it is quite comfortable and will allow without hassle, to sketch out even the most interesting details. Specialists recommend the installation of sheets, laying plates in such a way as to avoid long longitudinal seams, because with such an incorrect laying, the appearance of cracks is most likely.
It is better to create elements in the form of puzzles, densely joining them together. If the room is laid with two layers of plasterboard, then it is necessary to shift the sheets so that they do not repeat the previous drawing.
No less necessary work is to seal the seams, because you need to close the space between the plates. For such purposes - a putty mix, reinforced paper tape, capable of tightly sewing cracks, small strips of a serpent. Using a wide spatula, which is convenient to seal the cracks, you can ease the task. It is not difficult to sew the room yourself with the use of plasterboard slabs, if in addition to advice on the correct installation, use also high-quality material.
Buy it should be in the tested outlets and inspect each sheet for damage, defects, bends. Especially carefully it is necessary to approach the choice of materials for the children's room, even knowing that it is environmentally friendly, it is better to be convinced of the availability of a quality certificate and compliance with European standards.
How to drywall walls: types of material
In the construction market, they offer such types of plasterboard that can become a debris material for brick or wooden walls.
- Sheet, standard, gray color - GCR;
- Waterproof, green color - GKLV;
- Fire-resistant, red color - GKLO.
Drywall consists of pressed pulp, with the presence of gypsum for the role of a binder. Both edges are tightly closed with paper layers. Sheets are sold with a thickness of 16 mm to 32 mm, and come in different types, with a specific purpose and different price categories. All types of drywall are fire-resistant, they allow to delay the spread of fire around the house, allowing family members to leave the premises on time.
Self-sealing plasterboard walls using a metal or wooden frame is also possible if you follow the rules and know the ways. Self-cutters are used for this purpose. They must fit tightly into the material, and firmly entrenched. This method is more reliable, it is also possible to use a complex installation of gypsum boards, which allows more correctly to dispose of the existing area of the room and give it a complete look.
The use of plasterboard for wall leveling not only makes it easy to achieve an even surface, but also improves the sound and heat insulation of the home, it does not create dust and does not make clothes dirty.
One of the most important features of such a material as drywall is its ability to absorb excess moisture and give it away if necessary, if the air in the room is over-dried.
Instruction: how to properly wall plasterboard with glue
If after the preliminary preparation of the walls, it was decided to self-glue the material, you need to take care of the main materials.
- Specialists will help you to calculate the required amount of glue on the premises;
- Before starting the pasting, it is better to create a wiring plan;
- Do not cover the ventilation ducts, it is also necessary to cut out the places where the light switches and sockets will be located.
. The preparatory stage consists of removing dust from the walls, then you need to make sure the plaster is strong. If there is an old covering, it must be removed by yourself, as such negligence will bring a lot of problems and can damage the repair. If there are cracks or irregularities on the surface, they are subject to obligatory putty. The primer is most conveniently applied with a roller or a special brush. Then it is necessary to apply the adhesive according to the instructions on the package and glue the plasterboard to it.
Step by step: plasterboard wall sheathing( video)
If the house uses the right technology, the sheathing will stay strong, and for a long time please the eye.