Wallpapers for gypsum cardboard how to glue: whether it is possible, properly walls, fiberglass and non-woven, vinyl without puttying

The most common plasterboard is used for wall and ceiling finishing Drywall is one of the most popular materials for wall finishing in living areas. But in itself, he does not look very attractive and requires decoration work on the decor. How to properly prepare the surface of plasterboard for decoration, what wallpaper to choose and how to paste trellises perfectly smoothly, not all beginners know the finishers.

Can I hang wallpaper on drywall, and how to prepare the surface to Poqueline

Drywall is easy to use and install, it can be applied to any type of finish, whether painting, mosaic tiles or cladding and can be glued wallpaper. At first glance, it seems that the GCR surface is ideal for gluing wallpaper without preliminary treatment.

This is quite common misconception, because on the plasterboard surface there are still seams, gaps in the places of fastening screws to the profile and other shortcomings. In addition, drywall under the influence of wallpaper glue tightly "grasps" with the basis of most of the types of tapestries, and subsequently with a re-repair to dismantle them without damaging the cardboard layer of the sheet and gypsum core, it will be very difficult. However, some masters practice the way of gluing wallpaper on gypsum board without preliminary puttying.

Before wallpapering, be sure to carry out preparatory work with giipsokartonom

If you want to paste over the wall plasterboard thin paper or tissue paper or want to choose a light-colored wallpaper, be sure to proshpaklevat walls before gluing, or afterEnd of work is a great risk that the wallpaper will shine through the "native" greyish or green shade of drywall and all seams will be visible.

Whatever option of wallpapering you choose, the surface of the plasterboard should be prepared beforehand for the finishing works.

Preparatory work before the putty or glue wallpaper include:

• coating metal visible parts of the walls of a rust inhibitor;
• Treatment of walls with a special acrylic primer for the prevention of mold and fungus;
• Patching the sickling to the seams with PVA and applying a small amount of putty or primer over the seams and holes for the screws.

After completing these works, you can directly go to the procedure for gluing wallpaper on gipsokartonnuyu surface.

Wallpapering on gypsum board without shapklevki

In order to apply wallpaper on the wall of drywall putty without pretreatment, a more careful approach to the process of priming the walls, because in addition to disinfection primer serves another function: it helps glue tighter grips.

Applying a good primer on a plaster surface, allowing just hang wallpaper without prior spackling the walls

Drywall Walls type GKL is not too fond of moisture, so the wallpaper glue on them should be applied not too thick, so the drywall is not"Has led".

If you need to glue wallpaper light colors, you can avoid the already mentioned above translucence of seams, if after the primer, apply to the plasterboard a layer of white water-emulsion paint.

Step-by-step process of gluing wallpapers on drywall

When the surface is prepared, you can proceed to the final stage of finishing. Advanced masters cope with the wallpapering in two accounts. However, newcomers in this case may need help.

You can paste wallpaper on gypsum cardboard yourself, the main thing is to prepare tools and materials for the workflow

The algorithm is as follows:

1. Using a tape measure and a marking pencil, we mark on the walls the joints of the stripes of wallpaper. We cut the rolls into strips of the necessary length, we make sure that the picture on the joints coincides, otherwise the contrast will be too sharply struck in the eye.
2. We produce adhesive for wallpaper. Follow the instructions to properly observe the proportions of the mixture and water. The adhesive should be allowed to stand for a while, immediately after the dilution it will not be too persistent.
3. Using a paint roller, apply glue to the strip of wallpaper. Then you need to cover them with that part of the wall where the strip will be glued.
4. The wallpaper sticker starts from the corner of the wall, from the ceiling to the floor, the strips are arranged without overlapping. Each strip is neatly placed and smoothed with a dry cloth from the center to the edges, so that no air layers remain.

When working, do not rush, you should carefully check all joints, and also lubricate the web with glue.

Before starting to paste the wallpaper, it is better to de-energize the room: water-based glue is a good conductor of electricity, and electric shock when wallpapering is a frequent occurrence.

Finished pasted wallpaper must dry, it is advisable at this time to avoid drafts in the apartment. The same process of step-by-step tapping is suitable for walls made of drywall, covered with pre-putty.

Pre-treatment with putty: how to paste drywall wallpaper

Putty allows not only to hide joints and small errors on a sheet of drywall. It makes the design less susceptible to moisture, then allows you to easily dismantle the old wallpaper, while holding them securely and does not allow to swell or break away.

For the puttying works, two kinds of puttying - starting and finishing - are required.

Specialists recommend buying quality filler and mixing it thoroughly so that the mixture is uniform and well laid on the walls.

The first coarser fraction is applied "rough" to smooth the surface, after which it is ground and covered moreShallow finish. In addition to the putty itself, a bucket, a drill with a mixing head( construction mixer), a spatula small flat, a spatula large flat, sandpaper with a large and small "grain", "grater" are useful. After pasting the seams with a serpent, apply a primer coat to the wall and let it dry.

After this, you can proceed to puttying:

• In the bucket we spread a little of the starting mixture with water using a mixer to the consistency of very thick sour cream;
• We collect by using a small spatula putty and put on a large spatula;
• We put the putty on the wall with a thickness of 1-2 mm;
• Remove the remaining putty from the spatula and repeat the application procedure;
• When the entire wall is evenly covered with a layer of putty, let it dry, then we pass through the irregularities with a grater with a large-sized sandpaper;
• After the application of the "Start" we do the same procedure with the finishing putty, only we rub it with the "smaller" nazhdachka;
• When all the layers have dried, put the primer in two layers again on the putty.

Grouting putty - it's dusty, and it's better to carry it in a respirator or mask. After the repeated priming, you can proceed to cover the walls with wallpaper you like.

How to choose wallpapers on drywall

Specialists in finishing works do not consider that for a drywall some special kind of wallpaper is required: practically all variants from liquid to wallpaper will look good on the smooth surface of plasterboard. This applies, in the first place, glue on the putty cloth.

Many people prefer to choose a liquid or vinyl wallpaper, since any

can handle them with the application and gluing to the plasterboard. For gypsum cardboard without preliminary puttying, it is definitely not worth using thin paper wallpaper, but there are many options that are suitable for suchSticking.

Types of wallpaper for plasterboard without puttying:

• glass walls and liquid wallpaper that are applied to the wall;
• non-woven, vinyl wallpaper and wallpaper on a dense fabric basis;
• natural wallpaper of cork or bamboo;
• Wall Mural.

For pasting walls from plasterboard without putty, those types of wallpaper that have a dense base or a relief texture are suitable.

It will look good dense wallpaper of bright or dark colors that can hide the shortcomings of the wall.

If you use plain wallpaper with a small texture for painting, you can forget about the problem of their re-gluing during repeated repairs: it will be enough just to repaint it in the right color.

Instruction: wallpaper on plasterboard, how to glue( video)

Wallpaper gluing is the simplest and most common type of decor for gypsum cardboard walls inside a dwelling. They allow you to withstand the interior in the right style, do not require complex professional skills from the master and paste them on a flat surface of plasterboard with pre-putty or without it, even the one who first encountered the finishing work.