The beds in the greenhouse are 3 by 6: the width of the meter and the location of 6x3, the photo is made, how many 3x4 layout and layout

We correctly have beds in the greenhouse 3x6

Man-made greenhouses that have recently filled the household plots,flax fading. Increasingly, it is possible to meet on sites of advanced amateur gardeners of a 6x3 or 3x4 building made of polycarbonate. High new premises made of light-permeable material are rightly a source of pride for every gardener.

If you have achieved the achievement of modern manufacturers, when placing a greenhouse in the garden area, remember that:

• One long wall is better to have to the west;
• Second long - to the east;
• The end short is in the south.

The input located on the other short side is more rational to do from the north. At the entrance often requires space for the garden and watering tools needed for work. This arrangement will allow the plants to obtain the necessary amount of heat and sunlight during a day of light.

An exception may be greenhouses located on slopes or in places shaded by the crown of trees. When determining the location, the estimated height of the plants inside the room should be taken into account. If a number of tall plants are planned for growing, the long walls are optimally positioned in the direction from east to west. In this case, tall plants are placed on the north side.

Tracks between beds in a 3x6 greenhouse should be 40-50 cm

At a long southern wall, it is better to plant low-growing crops that will have enough sunlight.

If you have decided on the crops that are planned for disembarkation and found the best location for the greenhouse, then before the start of the work on the creation of rows, the question of effective use of space in the greenhouse should be studied. How many ways to arrange beds - a lot.

With the traditional arrangement, 2 ridges are created, a little more than a meter wide along the long sides of the greenhouse. The width of the passage is about 90 cm. This method is optimal if it is necessary to carry a wheelbarrow along the track, but makes access to the distal edges of the beds uncomfortable. The need to step on the ground for weeding or watering can damage the root system of plants.

2 rims along the edges and one in the middle, with 2 passes. In this case, the tracks are made in a width of 40-50 cm. This width is sufficient for free movement between the ridges without the use of a wheelbarrow. Narrow beds allow to provide better watering under the root, to remove weeds and to harvest, not stepping on the ground.

How to make beds in a greenhouse 3x6: photos and examples

For optimal organization of space, you can create not only horizontal ridges located in the same plane. Use all possible ways to effectively use every centimeter.

Namely:

1. Low-grown crops can be placed on racks.
2. When using vertical placement, it is important to remember the need to provide access to the sun's rays to the lower shelves of the structure. For this, the lower rows are made wider, and the upper shelves are much narrower.
3. For convenience, racks are usually placed in the central part of the greenhouse. This method is well suited for stunted seedlings.

For optimal space management, every centimeter of the

Suspended structures often create over horizontal ridges. It can be, as single low plants in pots, and boxes with greens. Carefully make sure that the structures are well fixed.

A rope break or drop of containers can not only kill seedlings but also injure a person nearby.

With terraced arrangement of plantings, the first ridge is located on the sunny side. The second and subsequent bulk ridges are set higher than the previous one. This arrangement allows plants to receive more light for active growth.

Creation of beds in a 3 m wide

To provide plants with sufficient heat, organic and mineral fertilizers, warm ridges are often created. They can easily be created even by an experienced gardener.

At the site of the insulated ridge:

1. It is necessary to excavate a trench, about 20 cm deep.
2. We install a guard rail in it.
3. As boards, you can use a board, slate sheets or corrugated board.
4. Down it is necessary to fall asleep a sawdust or straw. The approximate height of the layer is about 15 cm.
5. Next layer - manure or humus compact, up to 20 cm thick.
6. Spill with boiling water and leave to warm up for a couple of days. To enhance the soaring effect, the future range can be covered with a film.
7. Add on top a layer of fertile soil, about 30 cm.

Warm ridges provide plants with sufficient heat and fertilizer

The indicated depth of the layers is conditional, and can vary depending on the species of planted crops and the depth of the rootSystem of a plant. Make sure that the edges of the borders are not sharp and have no burrs.

Often injuries are caused by nails sticking out of boards or dangerous edges of materials.

You can create multi-layer fertilizers, for example, with the addition of chicken manure or purchased in-store fertilizer for a particular plant species. In the absence of manure, it is allowed to use rotten branches, rotted leaves, rotten hemp or bark. Such a mass is carefully compacted, and also watered with boiling water and covered with cellophane for warming.

Greenhouse 3 to 6: how to properly arrange the beds

In order to maximize the use of the area of ​​the greenhouse, it is necessary to correctly arrange not only the ridges themselves, but also plantations within the space allocated to them. The landing scheme should provide for features.

When planting different crops in a single greenhouse, consider whether they can be adjacent

Consider the distance between the adult plants and the expected range of stems, litters or branches, which will allow the soil to be treated, watered, and harvested without damaging the leaves. Closely planted plants need sunlight, lack ventilation and, as a result, poorly fructify.

Ask how the cultures interact with others. To ensure good growth, the requirements for soil moisture and the amount of fertilizer may differ. When placing a number of related varieties, there may be a perforation. Analyze the timing of planting and ripening fruits. After harvesting one plant, it may be possible to use this territory to plant another crop for a year.

Arrangement of beds in the greenhouse 3 to 6( video)

Before the beginning of the next summer season, do not forget to take into account the production of soil. In addition to cultivation and supply of soil with useful additives, use the movement of plants inside the greenhouse - change the plantings in places. Proper placement of garden crops will certainly please a wonderful harvest.

Examples beds location in the greenhouse 6x3( photo)