Greenhouse Maria Deluxe: instruction for assembling reinforced, video, polycarbonate, frame diagram

High-quality and affordable greenhouse "Maria Deluxe" Russian producers are represented on the market by the "Mary Deluxe" greenhouse, which has changed the approach to designing such structures. First of all, we are talking about a strong frame that withstands strong wind, snow and even rain. In addition, the greenhouse has a small mass and is easy to assemble. Even a beginner will cope with this in a few hours. In order to fully enjoy the results of engineering research of the domestic "Kuliby", it is necessary to study the advantages of the greenhouse.

Characteristics of the greenhouse" Maria Deluxe ": reinforced foundation

Gardeners are always acquainted with the appearance and significant design parameters until the momentpurchases. A cursory visual inspection speaks of the functional roof of the "Maria Deluxe" design. One side of it is made in an arched form, due to this, on the surface does not accumulate snow and rain.

"Mary Deluxe" of Russian production is designed specifically for the harsh conditions of the Siberian climate

The opposite side forms an angle of 90 degrees with the base. This allows you to plant high seedlings directly at the wall.

Ease and feel during the assembly of the structure of polycarbonate. Individual elements are fastened with wear-resistant plates with bolts.

In addition, the greenhouse "Maria Deluxe" has a number of other advantages:

• Uncomplicated in terms of creating a ventilation and watering system;
• Ability to replace individual elements without having to disassemble the entire greenhouse;
• The fixing points of the base and walls are flexible, allowing to withstand strong gusts of wind;
• The fastening system withstands lowered temperature and significant jumps in the humidity level.

Simple in terms of assembly and operation, sturdy - these are all characteristics of this greenhouse. Unlike other designs, where the gardener is forced to choose between strength and cost, in this case, you can buy "2in1".With proper care, the greenhouse will last at least 7-8 years.

Modernizing the greenhouse of polycarbonate "Maria Deluxe"

The progressive technical development of the horticulture industry leads to the emergence of more effective ways to care for seedlings. This applies entirely to the "Mary Deluxe" greenhouse. Most often, questions for the truckers arise to the coating - polycarbonate film wears out, requiring replacement of individual areas.

This product captivates consumers with its simplicity and functionality, providing remarkable crop yields

To solve the problem, you need to buy a film with similar characteristics. This is a complete or partial replacement of already installed material.

If this is done using different in its physical parameters, the greenhouse will become less durable. In addition, a novice should buy sheets of polycarbonate with a small margin. During the cutting, errors that require a repeat operation can not be ruled out.

There are other practical recommendations to improve the performance of the building:

1. The harsh climate is a real problem for any horticulturist who uses a greenhouse. To reduce the degree of its influence on seedlings will help the strands. They are put to reduce the physical impact of accumulating precipitation on the shell.
2. You can not ignore the base of the greenhouse. If the depth of occurrence of groundwater in the area is significant, then a 50x70 bar is used as the base. The material used is larch and slightly less often pine. Regardless of the type of wood, it is treated with an antiseptic solution.

Regular inspection of the greenhouse allows you to quickly identify any deviations in its design. As they are found, necessary repairs or improvements are carried out. If you give time to this question 1 time every 2-3 months, then the greenhouse will serve faithfully up to 10 years.

Tips for beginners: instruction for assembling the greenhouse "Maria Deluxe"

It is often enough that gardeners decide to literally take the initiative in their own hands. For work you will need an assembly instruction, materials and 2-3 hours of free time. It all starts with an assistant search, as it will be difficult for one to manage.

The design provides easy assembly, and modern covering material, cellular polycarbonate guarantees excellent heat savings

After this, all the components of the greenhouse must be decomposed on the ground. At the next stage, preliminary fixation of parts is carried out.

Here it is necessary to remember that the final screed of all elements occurs only at the moment when the greenhouse is in the vertical position.

The following procedure is as follows:

1. In the store of goods for repair and construction or in the cabinet, it is necessary to find a screwdriver, tape measure, construction knife, pliers, screwdriver, 7-10 mm wrenches.
2. The polycarbonate is fastened using self-tapping screws and washers. The more a gardener is cautious, the less likely the integrity of the film will be. Another practical advice will be the correct placement of the film. One side of it has a characteristic mark, which speaks of protection from UV radiation. Polycarbonate sheets are attached in such a way that this marker looks into the sky.
3. The edge of the blade is made using a construction knife. It is desirable that before your eyes there is always a prearranged scheme of work. After this, the edge panels are mounted and only then the side walls.
4. As soon as the sidewalls are in their places, it is necessary to perform another measurement. It is highly recommended that the polycarbonate sheet should go out of the panel at least 5 cm.

2 people are needed to assemble the greenhouse. While one presses the material to the base, the other - sets the clamps. Brute force is not needed here, otherwise the arch elements can be damaged.

Recommendations for the operation of the greenhouse "Maria Deluxe"

Many people mistakenly seek advice only on assembling the greenhouse. As practice shows, problems often arise at the stage of practical exploitation. First of all, attention should be paid to the fastening system. As it was said before, it contains a certain amount of dynamic load. On the one hand, it helps to withstand a strong wind, and, on the other hand, can lead to rapid destruction.

The main purpose of the greenhouse is to grow vegetables not only on large garden plots, but also in small gardens and small cottages.

To keep the reinforced frame in its original form will help attentiveness. On each fastener that comes with the kit, the maximum fixation size is marked.

In addition, attention should be paid to the following recommendations:

• The worn out or partially broken part must be changed immediately, otherwise one break will trigger the "domino principle";
• It is recommended to lubricate all fasteners at least once every 6 months;
• After each strong wind or rain, visual inspection of the structure should be carried out for possible damage.

Teplitsa Maria( video)

Wearproof, but lightweight greenhouse, allows you to engage in gardening in all weather conditions. Thanks to the sloping roof, no precipitation accumulates on it, and a solid wooden base reduces the physical load on the soil. In addition, the assembly process is simple, so 2 people can cope with it in a few hours. In order for the greenhouse to last a long time, it is necessary to regularly conduct its preventive examination.