Greenhouse 3x4 m polycarbonate perfect for growing vegetables at their summer cottage applied durable polycarbonate greenhouse 3x4 everywhere due to an attractive combination of price and quality. Strength, resistance to prolonged exposure to ultraviolet( UV) rays, increased thermal insulation properties - this is an incomplete list of advantages of a product of this kind. In order to fully enjoy these, the design must be selected correctly.
-
- Advantages greenhouses 2x3 polycarbonate
- Choosing greenhouse width 3x5
- Fasten foundation in the greenhouse 3 m
- consumption materials as polycarbonate greenhouse 3x4 need
- Installation greenhouses 3 4 Polycarbonate( video)
Benefits greenhouse 2x3 polycarbonate
Gardeners always seek to minimize the costs associated with maintenance of the greenhouse. This means that they need, on the one hand, not a whimsical service building, but on the other hand a structure capable of withstanding the prolonged impact of heat, cold and various precipitations. This is exactly the greenhouse made of polycarbonate, presented on the market in dimensions from 2х3 to 3х4 m.
As it was said before, the coating is characterized by a high level of strength. If you compare it with other varieties of greenhouse that are on the market, the results will be in favor of the polycarbonate variant.
Additional advantages greenhouses 2x3 m polycarbonate worth noting compactness and low price
addition, the design has several other advantages:
- physical ability to withstand excessive load on the roof in winter;
- The seedling in the greenhouse is less susceptible to ultraviolet light;
- Application of a 2-layer material makes the construction more heat-resistant;
- Operating temperature ranges from -50 to + 60C on a Celsius scale;
- Simplicity and speed of the assembly process;
- The design of the greenhouse facilitates the uniform spread of sunlight.
convenient, durable, inexpensive - design characteristics of the polycarbonate, which range in size from 2 to 4 m installation process takes no more than 2 hours and requires no special technical skills..At the stage of practical operation, the greenhouse is very unpretentious, which will make life easier for a beginning gardener.
We choose a greenhouse with a width of 3х5
It is strongly recommended that when studying different models, pay special attention to the quality of the film coating. If it is too thin, then the greenhouse will last no more than 1-2 seasons. This is explained by the physical characteristics of the polycarbonate. In the case of prolonged exposure to sunlight, the coating quickly burns out.
Avoid this will help opt for a 2-layer film coating, which has the appropriate marking. In second place in terms of importance is a kind of foundation.
The more precisely the base is chosen, the easier it will be to assemble. According to estimations of builders with the experience, the base on screw piles or its brick analog has well proved.
Toeplitz width 3x5 meters can be installed on the ground, and the foundation
This focuses on the fact that both embodiments are suitable only for the year-round construction of greenhouses. For a seasonal variant, a foundation based on the bars is suitable.
In addition, there are several other factors that allow for the design to be more durable:
- The depth of groundwater - with the results of the measurements taken on hand, you can easily choose the type of foundation. Brick variant or tape is appropriate only in the case when ground waters pass deep enough. If underground waters pass close to the surface of the earth, then in this case the greenhouse is built on the basis of screw piles or beams.
- Brick foundation with a tape-cement base - lies at a depth of 40 to 70 cm. The final figure depends largely on the intensity of precipitation in the region. The gardener should remember that the number of rows of masonry depends solely on the planned height of the structure.
- The foundation of the beams - the minimum diameter of each bar is 50( width) by 50( length) mm. Each element is fixed on the ground by means of iron stakes.
The foundation is the foundation of any hotbed, therefore at the design stage it is necessary to think over all the nuances. First of all, the rate is placed on the groundwater table. If such a low mark, then the choice falls on the foundation, made of bricks.
We fix the foundation in the greenhouse 3 m
It is useful for an aspiring gardener to remember an important building fact. The more precisely the fastening of the carcass and the base is made, the less problems will arise at the stage of practical operation. Regardless of the height of the structure, it needs a reinforced frame. It is created with the obligatory consideration of climatic features of the region.
The foundation for the greenhouse can be made of concrete or bricks
In most cases it is a question of materials capable of withstanding the vagaries of nature:
- Corner metal;
- Wooden beams;
- Metal pipes;
- Made of aluminum guides.
The most common option is a wooden beam that is attached to the base using an ax and saw. Collect a design of this kind can even beginner. The main thing is to keep the drawing before your eyes and check each step before and after its completion. Further actions largely depend on the level of possession of the instrument.
Beginners are advised to stop using corner, and professionals - at full logging. Generally speaking, the fastening of the foundation to the foundation is made by means of two common elements - wood or metal. The first is chosen for a seasonal greenhouse, and the second is for year-round greenhouses.
Consumption of materials: how many polycarbonate for a 3x4 hothouse need
It is necessary to repulse the planned parameters of the structure. For example, for a structure whose height is 4 meters, at least 5 polycarbonate sheets are required.
The indicator is rather arbitrary, because in the process of erection, errors in preliminary calculations can "get out".Unfortunately, but even such experienced builders are not always easy to avoid.
It will be appropriate here to always have a spare sheet, which allows, if necessary, to eliminate the resulting oversight.
Before buying a polycarbonate for a greenhouse, you must complete its drawing on paper and calculate the required number of materials.
The procedure for building a traditional or mini greenhouse is as follows:
- The foundation of the selected type is formed;
- It is preliminary recommended to install brick poles for it;
- The frame supports are fixed only with the use of the partial fixing of the beams with subsequent fixation by the corner;
- At the next stage, a bundle is formed from the bars for a 3x8 or 3x4 m construction;
- Depending on how many skates will be on the roof( 1 or 2), 1 or 2 racks are attached.
Installation of a 3 to 4 greenhouse of polycarbonate( video)
The production of a greenhouse 3x4 m is possible for year-round or seasonal use. Depending on this factor, the type of foundation is chosen. Regardless of this, the design is wear-resistant. Snow, UV radiation and strong wind can not break the strength of the greenhouse with a 2-layer film coating.
