Greenhouse reinforced: reviews and Summer cottage, the plant is strong, Triumph and constructions, the manor strengthen, the greenhouse and the frame

Any greenhouse polycarbonate should be reinforced, if you plan to its year-round use All reinforced greenhouses have only positive feedback and are manufactured using GOST, so you can be sure that the assembly of a large structure would not give labor, and productsWill fully meet the expectations. In addition, it is required to further strengthen the frame so that the wind load or other natural manifestations of winter do not harm the structure.

reasons for deciding to intensify the greenhouse

All quality polycarbonate manifest, provided a competent assembly and proper care during the operation. It is worth noting that, in the main, the spoilage of such property is due to the accumulation of snow on the roof, but now began to produce arched gable structures, from which the sediments roll off on their own.

Depending on the manufacturer and type of construction depends on the choice of the gain structure, but held it must, in any case, to be able to use the greenhouse for a long time

Greenhouse Polycarbonate - a sales leader, as it:

• Robust;
• Long-lived;
• Wear-resistant.

Few people know, but then, it will accumulate snow on the roof or not, depends on the polycarbonate, or more precisely, on its properties. In winter, the temperature inside the greenhouse can be maintained up to + 3-5 ° C.

If there is snow on the roof, it will gradually subside, and with the onset of darkness it will freeze.

Thus, there is a weighting of the snow cap, which can break the roof. On average, the weight of such a heap is 80 kg, its polycarbonate can withstand in the state only under condition of additional strengthening.

Reinforced greenhouse: successful "Summerman"

The creation of a structure of increased strength can be carried out in several ways, and in some cases, with absolutely minimal costs. The best option is to install duplicate arcs.

Many gardeners speak well of the greenhouse Resplendent summer dacha. On the strength of it really is superior to many other types of greenhouses

To do this, you can take the material:

• Out of metal;
• In the form of pipes with a square section;
• In the form of simple fittings.

In order for the greenhouse to last a long time, it is necessary to make a reinforcement, as well as to properly strengthen the foundation, competently prepare for the fall, and remove all the supports after the end of the winter.

For making pipes, it is possible to use patterns or a profile bending machine.

Arcs should be of a smaller radius, unlike the load-bearing structure of the greenhouse. Installation should be carried out at 5 cm less than the circumference of the greenhouse and preliminary it is necessary to prepare columns of metal. Duplicating arcs are the capital way to strengthen the greenhouse, besides, this gain is chosen, calculated, and it will be established quite possibly with our own hands.

The most rugged greenhouse design

Which greenhouse will allow you to assemble a large and high-quality crop - if you choose the correct manufacturing plant, if the thickness of the material from which the greenhouse is made is the most optimal if the supports are made.

The frame is the main element of the greenhouse. That is the strength of the carcass determines the durability and reliability of the greenhouse facilities

If you plan to permanent operation, the experts recommend options:

1. Cover the top with another sheet of polycarbonate, 4-6 mm thick.
2. Set once the most powerful and thick polycarbonate
3. Use option that can withstand all atmospheric phenomena.

Before thinking about solid greenhouses or hardening, the assembly must be done correctly. Polycarbonate construction is the most optimal and budget option. The thickness of the canvas should be a minimum of 4 mm, but this is not enough to use the equipment all year round.

How to strengthen the greenhouse

To strengthen conventional greenhouse, you should use props, and set them to the freezing ground. Particular attention needs puchisty ground, as if during the winter will be a sharp change of frost and thaw, that happens very often, all the fortifications eject from within, and polycarbonate break due to earth pressure. Strong greenhouses of premium class can be purchased ready-made species.

reinforced frame for greenhouses in winter is necessary to protect against the snow impact, strong wind and frost

placed on sale an incredible number of brands and models( photo in the catalog), such as:

• Triumph;
• Summer cottage;
• Homestead;
• Hope;
• Optima;
• Gardener;
• Vega;
• Carboglass.

Due to large sailing and small weight, the greenhouse could simply carry a strong gust of wind, which makes it quite unfit for use. You can eliminate this if you establish a strong and strong foundation. Some believe that a simple wooden frame is enough, since there are minimal requirements to it, but the protection will be too low.

It is important to harden not only the frame, but also the bases in it.

For sale there are special mounts in the form of the letter G, installation of which is carried out directly on the ground. Such structures are sold in addition to polycarbonate greenhouses and installed before the winter. The fastening element is considered to be bent valves, and rods must be a diameter of 0.95 cm. In the short side clamping length of 15-20 cm, while the one that goes into the ground 35-45 cm.

Benefits durable frame greenhouses

Experts believe, That it is best to purchase ready-made structures and order professional installation. Only in this way can you be sure that the greenhouse will stand for a long time and will not let you down at the right time. As already noted, every greenhouse needs a foundation, but for what purpose?

Steel frame is the best option in terms of strength and durability

Initially, it is through the foundation that structural stability is ensured, as well:

• Durability;
• Strength;
• Integrity;
• Aesthetic appearance.

Due to the solid foundation, reliability, safety and stationarity of the structure are also ensured. If the structure is light, then it is temporary, and over time it will not only lose its operational properties, but will become unsuitable for operation. To avoid this, it is necessary to establish a foundation, and a durable and completely appropriate type of greenhouse, which has a number of additional functions.

It is the fixing element of the structure and is able to hold the structure even in the strongest gusts of the wind, including showers and flooding of the site. It is the foundation that prevents the structure from touching the ground, which causes destruction of the material, since the soil has a detrimental effect on the polycarbonate and the metal frame.

Through the foundation, the probability of maintaining more heat inside the structure increases, which eliminates the need for additional heating. Inside the greenhouse will not penetrate the fog, and drafts will also be excluded.

It is the foundation that prevents the penetration of pests and harmful insects into the structure.

After the foundation is made, it is necessary to assemble the frame or, in other words, the base of the structure. Fastening is carried out in a reliable way to exclude breakage in case of strong gusts of wind. The frame can be made of aluminum, and its distinguishing feature is excellent workability. The aluminum alloy can be easily sawed and drilled, and to make a frame of this material, you need to choose a profile aluminum pipe or channel. The connection is made by means of bolts, tees, rivets and nuts.

The greenhouse covered with polycarbonate can be made by hand, but even then it must be of the arched type and be assembled after the preliminary drawing. With a competent approach to the arrangement, you can get not only quality equipment for growing crops, but also an excellent element of the garden that will have all the necessary properties. For today, PVC structures have often been used, and one should not think that they are too fragile, because the material is capable of withstanding serious atmospheric phenomena and lasting a lot of time. To assemble such a structure, it will also be necessary to form a foundation, and purchase a polycarbonate sheet, at least 8 mm thick.

The construction of the strengthened greenhouse( video)

The greenhouse will fulfill its purpose if it is done according to all the rules and the standard is observed. In this case, you can not worry about the fact that time, money and forces will be wasted.