Installation of stretch ceiling: how to install video yourself, the technology itself and quickly

The main advantage of a PVC ceiling is the price that perfectly matches the quality of the film material. Most often, they try to install a PVC ceiling, the method of attachment of which is harpoon. Why this particular species?It's not just that the independent installation of such a ceiling passes quickly, but also in the possibility of subsequent simple dismantling.

Installation of stretch ceilings: measurements

The rules say that you first need to take measurements. If the room is square or rectangular, measure the length of the walls and one of the diagonals. This measurement is needed, since there are practically no right angles during construction.

If the room is a complex polygon( which is less common, but nevertheless), the dimensions of all the walls are removed, then from any angle it is necessary to measure the diagonals to other internal and external angles.

Carrying out preliminary measurements is necessary for high-quality installation of the ceiling, as well as ensuring its strength and durability.

If the shape of the room is complex, you need to measure diagonals from two or even three angles. On the sketch, the entire room should be divided into triangles with sides that are measured by the

Curved ceiling layout

The curved ceiling assumes two possible scenarios:

• First method. The curve is taken as a sequence of short chords of several arcs, and you will need to measure the sides of all the resulting triangles.
• The second way. Mark the ceiling with a grid with a constant step, tie all the key points to it, and it's not difficult to build a ceiling on them.

It is not necessary to level the overlap before installing a stretch ceiling, but some preparation facilitates the process.

Measuring the room before installing the tension ceiling( video):

How to install the ceilings yourself: the correct preparation of

First, remove the layers of plaster from the ceiling that have already peeled off. The fact is that if after some time they fall to the surface of a stretched ceiling, it is possible, even if not strong, but a deformation.

Secondly, if the premise is damp, you need to take into account its features, and treat the ceiling with an antiseptic primer. After all, after installation, the tension ceiling will not be ventilated, and the fungus will have the most favorable conditions.

Before installing the tensioning system, it is recommended to treat the surface of the ceiling with a special antiseptic primer

. If you intend to mount a ceiling chandelier and / or other fixtures, prepare both the wiring and the lighting fixtures in advance.

Suspended Ceilings Installation Technology: Assembly Principle and Step-by-Step Instruction

The installation scheme begins with the fixing of the profile. If there is a choice, stop on the aluminum profile, and not polyvinyl chloride - it is stronger.

Then do this:

• The profile is fixed either to the ceiling or to the wall;
• If you intend to mount fixtures, fix the profile at least 7 cm from the rough ceiling;
• The profile can be attached to the wall with a maximum step of 20 cm, if the surface is weak, reduce this interval to 8 cm;
• If the room with light partitions, the profile is mounted only to the ceiling;
• Well, the installation itself is simple - mark out the water, and preferably the laser level, the horizon( without this markup it will not be exactly), make apertures with a perforator, and screw the screws.

Do not use wooden choppers in operation, after a while they will dry up and fall. Take only plastic dowels.

Preparation of a premise for installation of a tension ceiling:

Manufacturing of a tension ceiling and installation

And then the installation process begins. An example will be an example of one of the ways, according to it installations are carried out more. Everything is done quite simply and in a short time.

Installation of the fabric:

• It is necessary to hang the canvas straightened, on the clamps, after which heat gun warm up its entire area. Note that the air in the room will warm up, so take the animals out of the room and take out the flowers.
• Then you need to fill the corners, this is done either with a special spatula, or with a simple steel spatula, which has rounded corners.
• Then fill all sides of the canvas, starting from the middle. Continually warm the canvas in the process of tension. If the thickness of the web is not more than 0.35 mm, it cools very quickly.
• After that, with a spatula or spatula, you enter the harpoon into the slot of the profile-baguette, where it will catch on a special ledge, and the spatula will move to the next section of the edging.

Stretch ceiling installation scheme

Install ceilings in other ways, but this is perhaps the simplest.

As for the manufacture of ceilings, professional assistance is needed here.

There are two principal differences - the ceiling tension and the PVC film. The film is not the ceiling yet, but only the material used for it. The film is made at chemical industry enterprises, French and German films are considered high quality material. Russian production does not lag behind, the film is made with imported equipment, therefore, it is not inferior in quality.

On the question, how much is the film, and what is cheaper, the answer is simple - the Chinese film will be much cheaper. And if it is not handicraft production, but from a good manufacturer, one should not be afraid of this labeling.

Well, directly for the manufacture of linens for a particular room you need:

• Large workshop, not less than 100 squares;
• Cutting table;
• Machine for making canvases( for welding).

PVC film has excellent physical and chemical properties, which allows to successfully use the material in combination with other types of decorative finishes

The film is scraped according to preliminary measurements. In some cases, the canvas is cut from individual layers.

Tips for installing the

How long the ceiling will be installed depends on the type of attachment and, of course, the length of the perimeter of the room. For example, the ceiling with the above harpoon mount in a not very large rectangular shaped bedroom can be installed in two hours.

To register a company for ceiling installation, the following OKVED codes are used:

• 52.46.7 - retail trade in construction materials that are not included in other groups;
• 45.25 - production of construction sites;
• 45.45 - production of other final and separate works.

If you decide to mount the ceiling yourself, make sure before the start of the process that all steps are clear to you.

Assembling tension ceilings( video)

In case you decide to do the installation yourself, but are slightly afraid, choose a fabric stretch ceiling. Firstly, it is more difficult to break, and secondly, a heat gun is not useful for this.

Successful repair!