Stretch ceiling from gypsum board: truth or fiction, how to make a design yourself?Before embarking on repairs, it is necessary to think over which ceiling will decorate the new interior of the room. Today, one of the most relevant is the stretch ceiling, with built-in lighting, a single-level and multi-level type of construction.
-
- advantages suspended ceilings with lighting plasterboard
- What ceiling better tensioning or plasterboard
- Stretch ceiling without drywall
- Combined ceiling: plasterboard ceilings
- multilevel plasterboard( video)
- Stretched ceilings made of plasterboard( photo)
Advantages of stretch ceilings with gypsum board lighting
Using a multi-level gypsum shelvesArton, the room can be divided into zones, or to execute thematic paintings on the ceiling. Multi-level ceilings are used in bedrooms, living rooms, bathrooms and kitchens, not only new houses, but also used for renovation of old buildings.
The tensioning designs have a number of obvious advantages:
- Long service life;
- High level of thermal insulation;
- Room noise insulation;
- Excludes repair and restoration;
- Allows to hide construction irregularities, defects;
- Make a niche for laying communications;
- Original, unique ceiling design;
- Ability to integrate lighting;
- Various finishes( plasterboard, fabric).
Which ceiling is better: tension or from plasterboard
The main choice that a person should be puzzled about is a stretch ceiling or a drywall structure?Each of the options has both advantages and disadvantages, but no doubt, both kinds have an unforgettable appearance.
Stretch ceilings are made of PVC film impregnated with a special polymer composition. The basis for the design are special fastening profiles, on which the film is laid.
When installing a stretch ceiling, the room height is reduced by approximately 4-10 cm. The process of laying takes no more than 4-6 hours, depending on the skill of the performer and the complexity of the conceived design.
Advantages of stretch ceiling
Among the main advantages of stretch ceilings are:
- Easy to clean;
- Environmentally friendly and safe for humans;
- Long service life;
- The ability to combine different materials, styles and color of the invoice.
Important!Ceiling structures made of plasterboard are characterized by the need to lower the ceiling level in the room by 15 cm.
By performing such ceiling structures with full compliance with the laying technology, all work will take at least 7-10 days and "give" the owners a lot of dirt, building dust and debris.
Drywall is a high-quality and environmentally friendly material that has one important feature. Some consider it a drawback, but at the same time this fact can be safely written down in advantages.
Ceilings from gypsum board require restoration( painting) - this leads to permanent care, but allows you to change the color and texture of the ceiling depending on your mood and desire. So, in interior design, you can periodically make bright unusual notes and bright, original colors.
The irreplaceable plus of gypsum cardboard is its durability that allows using it for assembling complex multi-level structures, with curved( rounded) surfaces. Taki, in the interior you can create an unusual design, and adding a highlight - an unusual atmosphere of comfort and style, performing a plasterboard ceiling.
Stretched ceiling without plasterboard
The first impression in the room creates a ceiling, which is why it is so important to choose the most suitable, according to style and color, to make it unforgettable.
Stretch ceiling without gypsum board will not only make the appearance of the room more stylish and original, but also leave the height of the room without significant changes, due to lack ofNeed to mount an additional snap.
In addition, the design is much cheaper. Despite the ease of installation and speed of construction work, stretch ceilings without gypsum cardboard do not differ in durability.
Combined ceilings: gypsum plasterboard and suspended ceilings
Today, it is often possible to meet a combination of stretch ceiling and gypsum board in ceiling structures, the testimonials of which indicate the reliability and beauty of this choice. Thanks to this, in the end it is possible to achieve complicated domed, conical elements or to make an arch vault. This combination of stretch ceilings and plasterboard allows realizing the most daring ideas and fantasies.
Important!In order to fulfill the curvilinear design of the ceiling, it is necessary to use a special curvilinear profile as a fastening.
Stretch ceiling with gypsum board: variants
For the execution of this ceiling, one of the following can be used as a basis:
- . At the perimeter of the room, a strap is fixed and a profile is attached to which the stretch ceiling will be attached. Lighting devices in this case are fixed in the construction of plasterboard.
- The basis is a drywall, which is mounted with a vault or a circle, inside which is placed a stretch ceiling. This method is chosen for the subjects of the starry sky, which looks low in the low rooms and, most importantly, visually increases its height.
- Combined design, with pre-assembled lighting lamps mounted in the middle of the ceiling and can have a round, oval or curved shape.
Important!In order to ensure that the gypsum board can withstand the weight of the stretch ceiling for a long time, it is necessary to strengthen the frame, so that its weight exceeds the weight of the structure, at least 2 times.
Installation and decoration of stretch ceiling
For today, there are several main ways to decorate and decorate the stretch ceiling from gypsum board, which unlike classic finishing methods( painting, wallpaper) not only masks the construction "imperfections", but does not require prior equalizationSurface. This is provided by a niche between the ceiling and a stretched structure, hiding irregularities.
A stretch ceiling made of gypsum board requires the installation of load-bearing elements that will hold the entire structure.
The niche between the main and tension ceiling provides a gap in which the communication pipes can be hidden, for example, heating systems or ventilation systems, as well as alarm systems.
When choosing the source material( gypsum board), it is necessary to follow the future design of the ceiling and the technical characteristics of the material, for example, for an arched arch, a plasterboard with a thickness of not more than6 mm, so with standard single-level structures on the ceiling, you can choose a sheet that has a thickness of not more than 10 mm. In this case, it is necessary to calculate the weight of the sheet, so as not to be mistaken with the number of fastenings, according to the thickness of the drywall.
For rooms with a high level of humidity, such as a sauna, a bath, a bathroom, it is recommended to choose a plasterboard 12.5 mm thick and necessarily resistant to moisture.
Important!When laying the sheets, it is necessary to leave a small indentation from the wall, no more than 10 mm, thereby significantly reducing future deformations, from exposure to moisture and temperatures. For large, spacious rooms, it is recommended to perform a partial laying of the reinforced mesh to increase the strength of the structure. In rare cases it will be necessary to reinforce the whole surface of the ceiling, but this will eliminate the need for the future to deal with cracks at the junction of the sheets. Stretch ceiling from gypsum board gives an amazing result: a combination of durability and impeccable appearance. Multi-level ceiling from gypsum board( video)
Ceilings of plasterboard( photo)