Ceiling in the bathroom from the plastic panels photo: how to make, video as by own hands from PVC, repair of aluminum

click fraud protection

Ceiling ceilings from PVC panels visually expand the space of the bathroom and make it more aesthetic Ceiling ceilings made of PVC panels visually expand the space of the bathroom and make it more aesthetic No matter how the walls in the bathroom were decorated, they should be in harmony with the ceiling. After all, in the case where the ceiling is painted with ordinary paint, then it can form a different kind of pollution, which is sometimes difficult to wash off. Just the bathroom only in modern apartments has a large volume, and in old houses - in this place you can only be alone. Correct design of walls and ceiling visually increase the area and give a small room convenience.

        • Ceiling from PVC panels in the bathroom - beauty and convenience
        • Quality repair of the ceiling in the bathroom with plastic panels
        • Mounting the panels on the ceiling in the bathroom - calculating the amount of material
        • How to make the ceiling of plastic panels inBathroom with own hands
        • Ceiling from PVC panels in the bathroom with your own hands( video)
        • Ceiling in the bathroom of plastic panels( photo)

PVC ceilings in the bathroom - beauty and comfort

of PVC panels are so easy to install and operate that most people prefer this method of decorating the ceiling in the bathroom.

This material is not afraid of high temperatures and strong steam, does not corrode, does not get infected with a fungus.

There are so many pluses in one kind of material that I would like to immediately install it in my bathroom. In this case, the plastic panels are made in different colors, which allows you to choose the color of the ceiling in accordance with the overall gamma in the bath. In addition to the standard single-tone panels, the plastic industry offers a lineup with various divorces and interspersions.

Today the market of finishing materials offers a wide range of plastic panels for bathroom arrangement Today the market for finishing materials offers a wide range of plastic panels for bathroom arrangement

The ceiling made of PVC panels can close the wires that are connected to the lamps, as well as a good hood can be built under the plates, as in the apartments of some seriesIt is high and has an unsightly appearance.

Spot lights located along the perimeter, will give much more illumination than a single lamp under the ceiling.

Quality repair of the ceiling in the bathroom with plastic panels

Repair in the bathroom is a natural disaster comparable only to a fire. Everyone knows that this action takes a long time and does not allow full use of the bathroom.

Pros:

  1. The ceiling will be finished very quickly if you use plastic panels.
  2. Another plus in the repair with the help of plastic will be unnecessary leveling the ceiling, putty joints and stuff.
  3. Very often it turns out that the ceilings in the bathroom because of a very hot steam damp and the paint bursts, and the lime loses its color and turns yellow uneven stains.

To avoid the appearance of fungus in the bathroom, it is recommended to leave openings for ventilation when installing PVC panels To prevent the appearance of a fungus in the bathroom, it is recommended to leave the ventilation openings when installing PVC panels

All these troubles will be removed during the repair with PVC panels.

To ensure that the ceiling under the panels does not deteriorate and has not been exposed to condensation and fungus, it is worth installing an additional fan in the panels, which will be connected to the hood and turned on by a separate switch.

PVC panels are easy to clean and wash. Caring for such a ceiling is not difficult and does not require any costs for special cleaning products, because the panels are easily washed with a simple soap solution.

Installation of panels on the ceiling in the bathroom - calculation of the amount of material

Like all types of building and finishing materials, ceiling panels require correct and accurate calculation. Panels are standard sizes, so before you buy them you need to correctly calculate the number of panels required. In the purchase of bottom finishing material, there is one significant disadvantage. Panels are sold individually, and can happen in the calculation of a situation where 4 panels will be small, and from the fifth will have to cut off a third to complete the repair.

The dimensions of the panels come with a length of 2.6 m, 2.7 m. And three meters. The width varies from 24 centimeters to 37 and a half. The thickness is always the same - 8-10 mm.

For calculation, you will need to measure the length and width of the ceiling and determine how the panel layer will go - either along or across the bathroom. By installing the length, you can visually increase the length itself, and with this method there will be less work to cut the slabs.

The longitudinal arrangement of the panels on the ceiling facilitates the work of trimming elements The longitudinal arrangement of the panels on the ceiling facilitates the work of trimming the elements

With the transverse device you will have to do a lot of work to cut and fasten the plates to each other. But the width of the bathroom will visually become larger.

The most commonly done laying along the bathroom.

The calculation looks something like this:

  • The length of one canvas is divided by the length of the bathroom - the number of whole lengths in one PVC ceiling panel is obtained. The standard apartment of Khrushchev's time has a length of 150-170 cm. Therefore, with a bathtub length of 150 cm, it is better to take three-meter panels and divide each into two.
  • The width of the bathroom is divided by the width of each panel, the resulting number will show the number of rows.
  • When calculating in the store, sellers usually ask for the area and do not pay attention to the fact that the joints of the panels look very aesthetic on the ceiling.

When choosing panels, it's best to buy those that will leave less unnecessary residue left during installation.

How to make the ceiling of plastic panels in the bathroom with your own hands

Since the installation of plastic ceilings is not very difficult, it can be done by yourself.

Tools and additional materials will be required for work:

  1. Some aluminum profiles;
  2. PVC panels;
  3. Drill;
  4. Screwdriver or electric screwdriver;
  5. Self-tapping screws;
  6. A small number of metal hangers;
  7. Hacksaw;
  8. Glue "Liquid nails";
  9. Plinth for joining the ceiling and the wall.

When using these materials and tools, it is easy to install the PVC ceiling on your own.

Installation of plastic panels on the ceiling in the bathroom should begin with the marking of the walls and installation of the frame Installation of plastic panels on the ceiling in the bathroom should start with the marking of the walls and the installation of the

At the very beginning, it is necessary to make a grid with a pencil on the wall using the building level and determine at what height the profile should be fixed to the vertical surface of the wall, To which the plinths are attached. In this calculation, it is necessary to take into account the height of the fixtures for built-in lighting fixtures.

To the horizontal surface of the ceiling, metal hangers are initially attached, to which the profile must be attached, taking into account the distance between the first and the next guides in a half meter. To the profile, which is on the wall, a skirting board is connected, connecting the wall and the ceiling to the three sides of the room.

When all the profiles are installed, the ceiling finish begins with plastic, which I insert into the skirting guide and fixed with screws to the profile guides. But before you cover the ceiling, it is worth cutting all the panels to the required length.

In those panels in which the fixtures will be installed, make round holes with a special outlet or cut with a conventional knife.

After installing the panel with holes to these slots, it is necessary to tighten the light wires.

The final stage of the arrangement of ceiling slabs in the bathroom is the installation of lighting fixtures in plastic panels The final stage of the installation of ceiling slabs in the bathroom is the installation of lighting in plastic panels

The last panel may be too wide for the remaining space, so it must be carefully cut along the entire length, attach the last fourth skirting andInsert into place. The skirting board is glued to the wall using such a universal means as liquid nails.

Remembering the lessons of physics in the school, you should install the wires for the lamps in parallel, so that if one lamp burns out the others are working.

In the light holes are inserted fixtures for fixtures, to which all the wires are connected. Further it is necessary to insert only necessary bulbs and the ceiling is ready for operation.

Ceiling from PVC panels in the bathroom with your own hands( video)

Ceiling panels made of PVC on the ceiling look equally good with ceramic tiles, wall panels, self-adhesive film and other finishing materials for the bathroom. Before installing the ceiling, it is necessary to put the walls and the floor in order, since in the case of suspended ceilings, repairs are not begun, as usual on the top, but from the walls, first passing to the ceiling and then to the floor in the bathroom.

The ceiling in the bathroom of the plastic panels( photo)



instagram viewer