How to fix plastic panels on the ceiling: installation and dismantling of PVC on video, how and what to properly fix the last, repair yourself

For the fastening of plastic panels you will need a high-quality profile and self-tapping screws Wall and ceiling panels made of polyvinyl chloride are widely used due to their low cost and high performance. In order to properly attach the panel of plastic panels to the lathing, you need to follow certain rules and use only high-quality ceiling profiles and screws.

How to fix the PVC panels to the ceiling

Before installing the plastic panel on the ceiling, you need to mount the crate and starting profile. It is made of wood or profiles made of aluminum. After you check the smoothness of the crate, you can start installing PVC panels.

Remember that before starting the installation, carefully check the flatness of the plastic panel and make sure that the stiffeners and grooves are not deformed. Otherwise, you risk installing a low-quality panel that will deform the entire structure.

Uneven plastic panels can eventually deform the entire structure

The paneling is carried out in several stages:

1. Cut the plastic panels with a hacksaw. Do not forget to cut openings under the fixtures.
2. Fasten the first panel in the start profile. It must be fixed with screws.
3. Install the remaining panels in the same way.
4. The last panel must be secured very carefully. Remember that the size of the last panel should be slightly less than necessary, as the material tends to expand under the influence of temperature. If this does not happen, you can hide the gaps with a putty or special ceiling skirting. Fastening of the last panel is carried out with the help of self-tapping screws.

How to fix PVC panels on the ceiling without using the start profile

If desired, you can fix the canvas on the ceiling without using a special starting profile. It is believed that this method of installation is much easier. To perform the installation, you only need to fix the wooden bars or metal profiles on the ceiling.

For the fastening of wooden bars or metal profiles, it is best to use metal screws

The technology of installing PVC panels on the ceiling:

• Cut the PVC panels and make holes for the fixtures.
• Press the first panel as tightly as possible against the wall. Secure it with self-tapping screws.
• Install the following segments in the same way.
• As you mount, make sure that there are no large gaps between adjacent sheets. If you notice that the groove or the stiffening rib is deformed, it is better to disassemble the entire structure and replace the faulty panel.
• Then insert the finish profile and install the last panel. In order to make it convenient to install the last segment, use a wide spatula.

If you decide not to use the starting profile, then it's best to use metal screws that have a wide bonnet. Such products will provide the most reliable fastening. If you do not have at hand such self-tapping screws, then you can fasten the plastic panels with a press washer length of 10-15 millimeters.

How to fix the last panel on the ceiling

The fastening of the last plastic panel to the crate is the most important process, which requires from you almost a jeweler's precision. In case you incorrectly install the last segment, you have to disassemble the entire structure completely, so treat this process with all seriousness.

To fix the last plastic panel, you just need to insert it into the groove

Last panel mounting technology on the frame:

1. Check if there are large gaps between the panels. If they are, it is better to disassemble the structure.
2. Set the size of the last panel. For accurate measurements, you can use a laser tape measure.
3. From the received length and width it is necessary to subtract 5-6 millimeters, and to cut out the suitable panel.
4. Insert the segment into the groove, and fix it with the screws. In order to be more convenient to insert the panel, use a spatula. It will help to easily guide the edges of the segment exactly into the groove.
5. If you notice that a large gap has formed between the ceiling and the wall, fill it in. Then you need to install a decorative ceiling molding.

If desired, you can not use self-tapping screws to fix the last panel. You can simply insert it in the groove of the previous panel or in the groove of the guide profile. Due to the low specific gravity of the material, the panel will hold firmly.

Than it is necessary to fix PVC to the ceiling

The choice of fastening materials will depend largely on the material from which the crate is made. If it is made of metal, then most often self-cutters are used for metal. The dimensions of the fastening element are chosen based on the features of the frame.

The figure shows the most common tools that are often used for mounting plastic panels

Also for fixing PVC panels use:

• Brackets. These products are only used if the lath was made of wood. It is worth noting that it is not advisable to use staples if you plan to install thick PVC panels.
• Dowels. These products are used in case the lath is built at a small distance from the base surface. When using dowels, you need to make special holes for them.
• Liquid nails. This material is used rarely. Liquid nails are used in case you for some reason can not build a crate.

Use liquid nails only as a last resort, as this material is considered less reliable than self-tapping screws or dowels. In addition, when using liquid nails, the plastic ceiling will not be foldable.

Installation of PVC panels on the ceiling( video)

PVC panels are a practical and inexpensive material that has a huge number of advantages. If you want to install the ceiling from such panels with your own hands, then you need to build a reliable frame and pick up suitable fasteners. In addition, do not forget that the installation technology will directly depend on the availability of the start profile.