Spots for stretch ceilings: arrangement of overhead, photo installation, which fit, installation

Spots allow you to create unusual light patterns or just highlight the work of the room There are several options for lighting choice for ceilings. The modern market offers spots, chandeliers, light panels, suitable for lighting spaces with a ceiling made of PVC-cloth. Choose the ideal location of the spots to your liking and make an independent installation - the result will surprise you with its flawlessness and beauty.

stretch ceilings with spot: the main advantages

stretch ceiling has long won the trust of consumers in the world. There are many reasons for this: it's the cost, and the ease of installation, and the ability to make a beautiful stylish ceiling without heavy procedures for leveling, puttying and priming the ceiling. When it comes to lighting a room with a stretch ceiling, then there are several options. Many people do not think about the possibility of spot lighting and use a classic chandelier.

Place the spots on the edges of the main light source, and you will get rich, beautiful and versatile lighting composition

However, spotlights for ceilings, have several advantages:

• Huge selection. You will be able to choose an option that suits you both for price, style, and quality!
• Setting the spots does not require professional intervention. The design of the point light is designed so that even an amateur can install it.
• Lighting zoning saves energy, and also creates additional convenience in the operation of lighting devices.
• Freedom of placement. Spots are arranged so that you can freely choose a place for their location.
• Potential for creation of design effects. You can create your own light pattern on the stretch ceiling. Also, using spots, you can visually expand the space, or you can select the most important zone in the room.

An additional advantage of the spots is the ability to combine spotlights with a chandelier.

The best options for the location of the spots

First of all, before replacing your old lamp with directional light, you need to understand exactly what you want to see on your ceiling. Stretch ceiling with correctly positioned and installed overhead spots decorates the room and gives perfect lighting that meets all consumer needs.

There are eight basic types of spots on the stretch ceiling:

1. Oval. This scheme is most often used when they want to leave in the middle of the lamp, because such an arrangement overhead spots provides uniform illumination at the edges of the room, but the center remains darkened space
2. Circle. This scheme is best implemented in a square room. It, as well as the oval, gives uniform illumination along the edges, leaving a darkened center.
3. Focus. This option will accentuate the corners of the room, help to highlight some important details if they are under the spot.
4. Two semicircles. A typical solution that allows you to illuminate the room around the edges. In this case, it is also desirable to leave a chandelier in the center.
5. Arc. Thus, you can select the working area of ​​the room - the one on which you want to put the accent.
6. Wave. Room with non-standard dimensions will look best with a wavy arrangement of spots.
7. Rectangle. The arrangement of spots by a rectangle along the edges of the stretched ceiling will visually increase the dimensions of the room.

crosswise arrangement eliminates the spots nebhodimo install chandelier

If you decide to use one of the suggested options or come up with your own arrangement of fixtures, remember that for the best quality of lighting for each spot should be no more than 2 square meters. M surface of the ceiling.

How to install the spot in the ceiling

To install the spots in the suspended ceiling, you need to be extremely careful and strictly follow the instructions. In case of failure you can damage the ceiling, which can only be corrected by replacing it!

If you still believe in their abilities and want to install fixtures yourself, then perform the following actions:

• pre-set before pulling the ceiling fasteners for fixtures. Do not forget to de-energize the room!
• Attach a special reinforcing ring directly under the stand. Do not allow displacements.
• Cut the film inside the ring using a knife.
• Now it is necessary to bring the wiring out, and, if necessary, insert heat-insulating rings that will protect the ceiling from deformation in case of overheating.
• Now attach the cartridge and carefully insert it into the ring with the clips. Screw the light bulb and check the result!

Be careful with the introduction of the cartridge into the eye of slamming can damage the ceiling film

Thus, some simple actions performed skillfully and carefully, will lead you to success.

The retainers are supported by a spring mechanism, therefore it is recommended to make all movements smoothly, otherwise the part can get into the false ceiling. Overhead

spots: features and assembling

are very popular for this false ceiling spots. They can install even a beginner due to the well-known feature of these lamps. Overhead spots represent a small structure resembling a bra, which is attached to the bracket to the ceiling, which makes it possible not to cut into the PVC film under a special slit lamp. These lamps are very well suited to a false ceiling.

Distinguished overhead spots by the type of lamps. For such a luminaire, you can use:

1. Incandescent lamps. Among the advantages of these light bulbs can be identified only their low cost. However, this advantage is extinguished before the amount of energy that this device consumes. In addition, the incandescent lamp has a very high temperature, which can deform the stretch ceiling.
2. Halogen lamps. This kind of lighting equipment is much better suited for ceiling spots. The amount of energy consumed is an order of magnitude lower than in the case of incandescent lamps, and the temperature of the halogen lamp is not a danger for the PVC film.
3. LED Light Bulbs. This solution will be the most successful for ceiling spots. LED lamps are characterized by incredible durability and minimum heating temperature. The amount of energy consumed is minimized.

Work on installation of ceiling spots is not very labor-intensive, and therefore not too expensive

peculiarity overhead ceiling spots is the largest possible number of rounds. One spot can hold up to 7 pieces!Such a device can easily replace a full-fledged chandelier, and can also be supplemented with single spots to complete the composition.

Adjustment of lighting in suspended ceiling( video)

Be careful when installing lighting fixtures. Do not forget that you must disconnect electricity before installation. If you are not sure of your abilities, do not hesitate to call a specialist. Enjoy the choice of spot lighting and create a unique design in your home.

Spots for ceilings( photo)