Luminaire for Armstrong ceiling: LED and built-in, built-in 600x600 panels, hanging lamps, installation and installation, fluorescent lighting, fixing

Armstrong ceiling lights decorate the ceiling of any room Armstrong ceiling lights are now very popular. Why?Yes, because it is both fashionable and very convenient: simplicity of installation and cheapness. In addition, these lamps have excellent performance.

vlyayut a LED lighting for ceiling Armstrong

Each luminaire for ceiling Armstrong is convenient because it is already prefabricated construction of the controller and power supply - they are concealed directly behind the diffuser. That is, such lighting can be directly connected to the network in 220 volts with alternating voltage. Also such lamps are equipped with a radiator. They are exactly the same light diffuser, because it is made not of glass, but of aluminum or a material close to its technical parameters.

The company also produces so-called LED panels, which are the best option for arranging an office lighting system. Their key advantage is a large coverage area with light, energy efficiency, a high luminous frequency( which creates a minimal load on the eyes), optimally selected density and brightness of the luminous flux. Naturally, the lamps in these lamps are replaceable, but without this they will work from 5 years with active operation.

LED panels are easy to install, economical, do not need special maintenance

Armstrong also produces those models of lamps that are built into the ceiling. Their installation generally does not represent anything complicated, since the dimensions of such panels are standard( for example, 60 by 60 centimeters, which corresponds to the standard separation of profiles in a false ceiling).

Total, key advantages of Armstrong fixtures:

• relatively low cost;
• combined with regulator, transformer and power supply;
• easy installation;
• there is the possibility of power control, remote control;
• longevity( the average operating time of each LED lamp is about 30-60 thousand hours, which is almost 20-30 times more than for standard incandescent lamps).

Luminaire raster embedded in the ceiling Armstrong 600h600: purpose and benefits

The raster lamp 600x600 is designed for suspended ceilings. It is built directly to a depth of up to 20 centimeters, can be connected to a 220 volt network.

The key advantage, which is the difference - the presence of several edges with a mirror surface, which ensure the optimal distribution of the lighting flow throughout the office space.

Bituminous lamps can be used in all types of suspended structures

By the way, these ribs also partially function as a drain for surplus heat. The lamp itself is a panel that is fixed to the capital ceiling with the help of screws or anchors( although it can be kept even on belts).

Sometimes these lamps are installed fluorescent lamps, but their characteristics are much worse than in LED backlighting. And the current consumption is much higher. Their only advantage is less heat, but they are much smaller. The standard operating time of luminescent( which in the people is often called "energy-saving", although this is not entirely correct) lamps - 10-15 thousand hours. At the same time, their brightness after 5 thousand hours will decrease.

Total, a recessed luminaire 600 to 600 is required in the following cases:

• arrangement of lighting in the office;
• need to cover a huge amount of light;
• to create energy-efficient diffuse lighting( for example, for street lighting).

LED ceiling panel Armstrong: installation and connection

The Armstrong LED panel can be mounted in several ways. The simplest among them is a banal tightening with the help of screws to the capital ceiling. This design and hold will be good, and will withstand even the strongest vibrations. The standard panel power is 4x18( that is, in 4 rows, or 4 LEDs, each of which consumes 18 watts).

Thus, you can hide all the wiring and do not have to re-dismantle the hinged part. The installation itself is done on metal profiles( transverse or longitudinal - it does not matter).If necessary, the back cover of the lighting panel can be removed, but this is highly discouraged, as the outflow of heat will be disturbed.

When it comes to powerful panels that consume about 60 watts or even more, this will necessarily damage the LED elements.

With regard to the connection, it's all very simple - it makes the connection to 220 volts via some kind of switch( and can be remotely controlled).There are fixtures from Armstrong, which are not equipped with either a power supply or a controller by default. Accordingly, installation of these components is also required to install them. Hide them can be for any niche, or directly between the capital and hinged ceiling.

Due to its characteristics, recessed luminaires are ideal for office or industrial premises lighting.

. If the connection is made on its own, consider:

1. The polarity of the connection between the panel and the power supply.
2. Dimensions of the panel itself( meaning the thickness, since the embedded panel should be aligned to the general level without any gaps or protrusions).
3. The power limit of the entire panel( rather than each individual element).For the same parameters, the power supply unit is selected, only with the required power reserve( at least 20 parameters from the actual value).

Armstrong differs from other models

Armstrong brand is very popular due to its reliability and very high quality adjustment of each product. That is, even if it's a question of embedded panels, you do not have to worry that they will not distribute the light evenly around the room. And with all this - they are extremely energy efficient, as they use only American-made diodes in lighting elements. In them - almost 2 times higher than the efficiency, if compared with similar models of Chinese production( which can no longer boast of reliability).

One of the important differences between Armstrong fixtures is their high maintainability, due to which they serve for decades. In addition, the lamps built into the ceiling look very chic and expensive.

The design itself is collapsible, but is already sold with a ready-made kit with pre-installed power supply and regulators. That is, for the operation of such a lighting device, it is enough to fix it on the ceiling and connect it to a 220 volt network.

Armstrong luminaires are equipped with special protection and cooling radiator, noiseless, environmentally friendly.

The manufacturer also manufactures single lamps that are characterized by lower power, but they will be optimal for lighting small office lighting or cabinets. Each of these panels has its own indicator of the optimum mounting height, which only proves how responsible the manufacturer relates to the manufactured lighting devices.

Total, the advantage of LED panels from Armstrong also include:

• the highest quality;
• low cost( at the level of Philips products);
• maintainability;
• envisaged the possibility of upgrading - replacing the lighting elements with more powerful ones.

Naturally, this type of fixtures can be used not only in the arrangement of the office, but also at home( with a ceiling height of 3 meters or more), or in production. In the latter case, it is recommended that the luminaire itself be covered with a protective screen. This is not necessary if you use special panels resistant to external factors( IP protection class is indicated on the packaging).

Armstrong LED fixture installation( video)

And, the main thing is that it's easy to install. With the installation of a technological LED lamp will cope with any man. Connect something wrong or mess up - it still will not work. This lighting pays off quite quickly - for 1-2 years.

LED lamps for ceiling Armstrong( photo)