Closet in the hallway with your own hands photo: projects and diagrams, make in the corridor, drawings with description, video

If you are not sure that you will be able to make the closet yourself, it is better to use the services of professionals. Not every cabinet in the corridor can be made independently. For example, today's popular radii cabinets are very difficult to produce without the proper skills and experience. Only a professional can design such a cabinet. But simpler constructions, whose schemes do not differ in any complexity, can be done on their own.

Stages of work: closet in the hallway with your own hands

Work, Of course, not fasti. To act is necessary according to plan, in stages. Focusing on the plan, you do not miss anything, you will not get lost, before you will be a guide to action.

Phased work plan:

• Selection of material for the future enclosure;
• Determination of filling - description and drawings are needed;
• Door design, including choice of suspension options;
• The way to suspend the shelves is selected;
• A niche is prepared for the built-in cabinet;
• Carrying out measurements, drawing;
• Purchase of accessories, materials, as well as cuts of blanks;
• Assembling the cabinet with the installation of interior lighting;
• External decorative finish.

First of all, you need to purchase all the components of the cabinet and study the drawings

It turns out that work does not begin even with the design of the future cabinet, but with the choice of material. After all, the manufacturing principle depends on it, and with different materials will have to work differently.

The closet in the hall with your own hands: the choice of the material

The tree is considered a traditional and now a very prestigious material. But is he lucky for the closet?Judge for yourself, the humidity in the niche, whatever one may say, will be above the average, the tree will inevitably start to warp. Well, the decorative role of wood in the case of a closet is also questionable.

But if you decide to be hard - wood, and nothing else, choose straight-layered wood, without knots, cracks and cracks, aged and well impregnated with linseed oil, and even VPE( water-polymer emulsion).

The next kind of material is plasterboard. It's easy to work with, it's cheap, but it's not worth forgetting about the fragility of this material. Nevertheless, it is intended for finishing works and can not be part of the carrier system. That is, he can not hold something on himself - it must be something to keep him.

As a material for the compartment compartment, Fibreboard or MDF

is ideal. The most suitable materials are laminate, fiberboard and MDF.These materials include useful properties of wood, but they are insensitive to the gradient and moisture drops. Fibers take medium or high density.

Filling: closet in the hallway with

schemes The filling or internal filling of the cabinet is its internal layout. Today, it's easy to find the best option that will meet all your needs. Many examples on the Internet are filling variants, shown from different angles. This is very convenient, if you yourself have not decided what will be the content.

The following rules apply in the filling:

• Raw is put aside, separately;
• The right and the small should be before your eyes;
• Dry put higher;
• And valuable should be in boxes.

The diagram clearly indicates the dimensions and location of all elements of the sliding door wardrobe

Consider the examples. It is wrong to make a section for outerwear in the middle. Then the dampness from it will necessarily go to the sides. If you make the section on the side, the moisture from the clothes will go out.

We design the closet in the hallway

Of course, the process of creating projects was simplified - there are many Internet services where, with the help of given values, the program creates a project. You can take and ready-made project, which suits the peculiarities of your hallway. But there is another option.

Than ordering a cabinet from scratch in a particular firm, it will be cheaper to order a saw cut. Many furniture makers today have robots with computer control - it pays off such an acquisition well. In a word, no matter how the furniture department is equipped, but practically in every city, it offers a service for the cutting of blanks. And it saves you money.

The design of the project should take into account the size of the hallway and the functions to be performed by the cabinet

All the same, the furniture material is taken at wholesale prices, and considering the total area, you save 20 percent more accurately than you would independently purchase the material inRetail. And there are discounts for trimming. Also, when sawing a service such as edge banding is offered.

Fastening of shelves in

The most profitable way of fixing shelves in this case is for trimming simple skirting. Plinth of MDF as it does not happen today, different sizes, textures and profiles. And in order to fasten the shelves not very much into the eyes, take a piece of skirting shorter than the depth of the shelf somewhere in the third. A butt can also be cut obliquely.

For fixing the shelves, you can use screws or special corners

Similarly, you can mount the upper and lower partitions in the cabinet( to the floor and ceiling).Only cut off the skirting board, do not shorten it. If you take a ceiling skirting of small size, their butt ends completely cover the upper and lower rails. A very strong structure is formed together with the same way fixed shelves. And yet this design will support the wooden floor from sagging( and the weight of the doors contributes to this).

Cabinets in the hall with their own hands( video)

This, of course, not all the moments in the manufacture of the cabinet, but most, perhaps, important. Soberly assess their capabilities, think, maybe some stages still entrust professionals. And do not abandon the video lessons, which are very useful.

Good work!

Design wardrobe in the hallway with his hands( photo in the interior)