Heating greenhouses with their own hands: make a built-in, video, build an air large water greenhouse

If the greenhouse is used in winter, then it must be equipped with heating equipment. The greenhouse allows you to get a high quality and large yield, and sometimes in such climatic conditions where it would seem impossible to grow cucumbers or tomatoes. It is worth noting that in the greenhouse it is possible to grow various crops throughout the summer, but also all year round. For this, it is necessary to make the heating of the greenhouse, and this can be done by oneself. The heated greenhouse opens up new opportunities and horizons, for example, in the form of increasing the volume of the crop, improving its quality and consuming fruits and vegetables 365 days a year.

Heated greenhouse with your own hands

Simply building a large greenhouse is too small fortlichnogo harvest, as it is necessary: ​​to strengthen it, to make insulation and have heating.

The type of heating of the greenhouse can be very different, namely :

• Gas;
• Furnace;
• Steam;
• Water.

It is not recommended to heat a heated greenhouse with

. To build a greenhouse could meet expectations, it is necessary to carefully approach the choice of heating, as it must be done not only correctly, but also so that the construction does not cause harm toPlants.

The heating system must be selected according to certain criteria :

1. Dimensions of the greenhouse.
2. Which heating system is installed in the space of the house or garage.
3. What is the budget to spend.
4. Features of the heating system, for example, whether the device is self-contained or normal.

Today there are ready-made heating systems, but their cost is high enough, and cheaply will choose homemade equipment, the device of which is not difficult to conduct. In addition, it is worth paying attention to how difficult it is to carry out a certain heating, what additional materials and fixtures or fixing material will be required. It is necessary to take into account the advantages and disadvantages of each type of heating device, to calculate how it will work effectively and whether additional installations will be required, the device of which will help create a favorable climate in the room.

How to make heating in a greenhouse: water structure

Among all kinds of heating, experienced gardeners prefer to choose just water, as it is much easier to make yourself.

And also it :

• Durable;
• Quality;
• Practical;
• Easy to operate.

Heating for greenhouses can be made from ordinary metal pipes

Water heating is considered the most advantageous option due to the fact that it can be used to warm up the entire greenhouse, in particular earth and air. Unlike it, air heating only heats the space inside the room, but not the ground. That is why the most favorable climate is created due to the water heating circuit, which promotes active growth of plants of any kind.

In addition, this method does not dry the air, which means that it will not be necessary to additionally install humidifiers and worry about the occurrence of diseases from severe drought.

Naturally, the heating device of the greenhouse will fully meet all the necessary requirements, provided that the installation is performed in a qualitative way. In addition, with its help you can heat a greenhouse of any size, and the system is heated: wood, peat, garbage, various waste, coal.

The heating system consists of :

• Furnaces or heating boilers;
• Pipe;
• Radiators;
• Chimney;
• Expansion tank;
• Pumps for water circulation.

It's worth noting that you need to choose a boiler, depending on what kind of communications there is on the site. For example, in the presence of a gas pipeline, it is necessary to install a gas boiler, and if it is possible to connect electricity, then it is permissible to install an electric boiler that operates at the expense of solid fuel.

Recommendations: how to build a large greenhouse with heating in 2 circuits

More effective is heating in 2 circuits, because it: high-quality, practical, convenient and most effective. Therefore, it is worthwhile to form a dual-circuit heating system, but with the installation of a circulation pump supplying water to the pipes. Simply installing pipes without a pump will not achieve the desired effect and maintain the optimum temperature for a long time.

Before constructing a greenhouse with heating, it is necessary to execute its drawing

The configuration of the primary circuit consists of PP pipes that can withstand high temperatures and they are laid in the root part of plants.

Due to the second circuit, space under the dome is heated, and water flows through pipes and radiators. If the thermostat is connected to the system, it will be automatic and, without the owner of the greenhouse owner, the heating of the room will be controlled, which will prevent too much temperature rise and damage to the plants. Radiators connected to the system can be of various types.

In particular :

• Bimetallic;
• Aluminum;
• Cast iron.

It is mandatory to have a surge tank, which is closed and open type. The tank can also be made by hand, for which you will need to use a sheet of metal. It is equally important to choose the right chimney, for which use either a pipe made of metal or from asbestos-cement. Some install a sandwich tube on the chimney.

Instruction: how to make water heating in a greenhouse

For heating in a greenhouse, at least steam, although geothermal was of high quality, it is necessary: ​​to select the right pipes, install the necessary number of radiators, and properly set up and place the heating devices. Construction boilers and a stove are installed in the space of a tambour of a greenhouse, where it is also necessary to equip special shelves for coal and firewood. Install a device for heating the room in the greenhouse itself - it is an optimal and profitable option, since it will not heat the street, but only the greenhouse itself.

Among the advantages of water heating it is worth noting the efficiency and long life of the

If additional pipes are to be laid for the water circuit, then a number of specific actions should be taken. :

1. Construct the foundation on which the furnace will be installed;For a brick structure you need to choose a concrete base, and for a metal or a boiler it will be made of asbestos-cement or steel sheet.
2. A flue must be present, through which the combustion products will escape, as well as soot and soot.
3. For self-sealing joints use a solution based on clay. Cement at too high a temperature will crack and gradually begin to fall asleep.
4. Do not forget about the installation of high-quality ventilation, which is made of metal pipes of the same diameter.
5. Before installing the water heating, it is necessary to mount the expansion tank, which must be located at the highest point of the room next to the furnace and boiler.
6. The controller of the heating system is then installed.
7. If the radiators have a faucet, then you need to make jumpers between the outgoing and incoming pipes.

Experienced vacationers prefer to carry out all the repair work themselves, as it does not require additional costs, and will also be of higher quality, because where is the guarantee that the called master will be able to perform everything as required. In addition, you need to choose only high-quality materials that will last a long time, fully meet all the requirements and you will get to make heating that can heat the room.

Heating in the greenhouse with your own hands( video)

It is not difficult to create a microclimate acceptable for plants of all kinds, but only with the above recommendations. When using heating with a water circuit, it is necessary to monitor the safety of the product and its operation in order to avoid the emptying of pipes and the explosion of the tank.

Sample heating in the greenhouse with their hands( photo)