Installation of ventilated facades is necessary to increase the durability of the house and give it a more aesthetic appearance.
Thanks to this design, the walls are leveled and look beautiful, and the house becomes warmer and more reliable.
Contents:
- Mounting technique
- Self-assembly by yourself
- Service prices
Mounting technique
The design of the ventilated facade represents a sandwich made of a carcass, a layer of insulation and facing material, such as: porcelain tiles, fiber cement, metal siding and others.
A hollow niche must be left for ventilation.
The ventilated facade is a complex system, if even the slightest mistakes are made during its installation, the service life of the system will be significantly reduced.
Video:
Therefore, when carrying out the work, it is necessary to follow exactly the technology of installation of ventilated facades.
The preparatory work is as follows:
- Preparation of technical documentation;
- Designation of the boundaries of the hazardous area at the facility;
- Preparation and inspection of facade lifts;
- Marking points of places of installation of brackets on the building wall;
- Installation.
Mounting of hinged ventilated facades is carried out in the following sequence:
- In the wall holes are drilled with a perforator;
- For each bracket install a paronit gasket through the anchor dowel;
- Install the supporting brackets by twisting the anchor dowels with a screwdriver;
- Next, the installation of thermal insulation, which helps protect the structure from noise, wind and precipitation.
- The insulation board is hung through the slots for the brackets.
The membrane of the wind-hydro-protective membrane is hung from above and temporarily fixed.
For the installation of ventilated hinged facades, the webs must be overlapped.
In the wall through the slabs and the film, drill holes into which the dowels are installed.
Mount the insulation plates starting from the first row from the base on which the first row is mounted.
Video:
Hanging them horizontally, trying to ensure that between the plates there are no through slits. The installation of ventilated facades is not finished yet.
Then proceed to mounting the guides. To do this, vertical guide rails are attached to the adjusting brackets.
The profiles are installed in the grooves of the support brackets. They are fixed to the bearing brackets with rivets.
The profile should lie freely so that it can move vertically and compensate for temperature deformation. Then install fireproof cut-offs.
The next step is to install the air conditioner on a ventilated facade. It will remove condensate and heated air.
Photo:
The split system has recently become very popular, it helps to achieve ideal indoor conditions, but the installation of an air conditioner on a ventilated facade is very labor-intensive.
The lining is then assembled from the selected materials.
We are installing ourselves
Many owners of private houses decide to install the ventilated facades with their own hands. For this it is necessary to choose the right materials.
An important element of the system are the brackets and guide profiles. They must be made of galvanized or stainless steel and withstand certain loads.
For this, when selecting them, pay attention to the material properties, its thickness and the size of the stiffeners.
They in all respects must coincide with the design requirements. You can not save on them. You can use aluminum products, they are much lighter than metal ones.
Video:
The installation instructions for ventilated facades with their own hands are the same as for professional installation. It is given above.
When attaching a windproof film, consider the following rules:
- Mount the film from the outside of the thermal insulation using the dowels;
- The overlap must be at least ten centimeters;
- Inside the film is tightly attached to the heater;
- In places of overlap, the film is fastened with connecting and sealing tapes to avoid undesirable condensation of moisture.
Install the cladding strictly according to the installation scheme for the ventilated facade.
Ceramic granite tiles or other facing materials are installed after fitting the end clamps and fixing them on the profile, after which rubber seals are inserted into the profile.
Installation of granite from the bottom - top, left - right. Porcelain tiles are fastened observing the gap.
If the design and installation of ventilated facades are not performed correctly, problems will inevitably arise.
The most common is blockage of the air gap due to a fallen insulation or detachment of the membrane.
They are warped, wet, and the owner subsequently has to rework everything and spend money on repairs.
Therefore, installation of a subsystem of ventilated facades is best entrusted to specialists, since if the technology of installation of ventilated facades is observed and carried out according to all rules, they will protect the walls of the house for at least twenty years.
Service prices for
The price for mounting ventilated facades is determined from the total cost of framing materials, the insulation used, the type of cladding and the arrangement of additional elements.
If specialists are involved in the arrangement, installation works are included here.
When installing outdoor air conditioning, the cost of mounting a ventilated facade should increase significantly, since the work of this level of complexity is quite expensive.
To know how much it costs to mount a ventilated facade, you need to know the number of windows in the house, the availability of bay windows and the number of external corners.
Video:
The more of them, the more complex the work will be on the arrangement and, therefore, the prices for the installation of ventilated facades in this case will be higher.
If you decide to do the installation yourself, but you buy a heater of a well-known company and other quality certified materials, then you can not manage the budget amount.
The cheapest finishing materials are siding and corrugated board, and the most expensive is the stone.
If all the adjustment works you do correctly, then the ventilated facade will serve you impeccably for about fifty years.
Do not save on materials and work on the installation of facades, the search for teams, consonants to conduct insulation for the lowest cost, because of this, additional expenses may soon be required.
