Spray gun for ceilings and walls - how to use?

Painting surfaces with a large area always takes a lot of time and effort, and in order to greatly simplify the workflow, it is recommended to use in this case a spray gun for ceilings, as well as walls.

In most cases painting of walls or ceilings in an apartment is done by a roller or an ordinary brush.

As a rule, in this case, it takes more than one hour to work, and besides this, a huge amount of physical effort is expended.

It should also be noted that very often after painting the surface with a roller or brush, various stains and drops are noticed on it, and besides this, the paint does not always fall evenly and smoothly.

Meanwhile, in our time, for the qualitative painting of surfaces with a large area, manual labor can be replaced by an automated one, if you use a device such as an electric spray gun.

Spray gun is a great alternative to roller and brush if necessary to perform a large amount of work using water-based paint or whitewash.

If you know the technology of painting the surfaces of the ceiling or walls with a spray gun, the work can be done quickly with minimal physical effort.

Advantages of working with spray gun

Painting a ceiling in an apartment or a house - the work is quite complex and time consuming, and if you do it with a roller or brush, it can take a lot of timeand forces.

In addition, it is not easy to make the composition on the base lay evenly and without streaks. In this case, it is best to use such a universal device as an electric spray gun.

This unit has a number of undeniable advantages when applying water-based paint or whitewashing on a large area foundation.

First of all, it should be noted that with the help of this unit, the productivity of labor and the amount of work performed increase sharply.

The layer of water-based paint or whitewash applied on the base is obtained not only smooth, but also as thin as possible, which in turn reduces the cost of the material.

Almost completely solved the problem with the heterogeneity of applying a layer of composition on the ceiling base.

In addition, the use of this unit allows you to easily reach even the most difficult places on the ceiling or walls.

When using a spray gun, less dirt forms, and the risk of dirtying the room and clothes with paint is practically reduced to zero.

It should be noted that painting the base with water-based paint with the help of a spray gun makes it possible to avoid the formation on the surface of all sorts of divorces and strips, which very often occur when working with a roller or brush.

This unit can be used not only for painting the base with water-based paint, but also for its whitewashing, as well as puttying and varnishing.

In addition, the cost of the used composition will be significantly reduced, since the spray gun uses a much smaller amount of used material when the base is uniformly painted.

In the video below, you can see how with minimal effort using a spray gun you can quickly paint the surface of the ceiling with water-based paint.

Video:

Types of spray guns

Currently, in specialized stores you can find a large assortment of spray guns designed for painting or whitewashing various types of bases, including the ceiling.

The most accessible are hand-held devices. This unit is a certain size tube, which is connected to a special pump.

In order to activate it, it is necessary to create a certain pressure in the attached reservoir by means of a pump, after which the tube is sprayed over the surface with a working compound.

This simple device can also be used for whitewashing.

With the help of a hand-held spray gun, the ceiling with a large area can be evenly coated over a short period of time.

Paint spray guns with electric drive are very popular.

These devices allow you to perform the necessary work in the shortest possible time, and for their use does not require the use of any additional equipment.

Today, you can find a variety of modifications to electric spray guns, but it is best to use those models that spray on the surface of the composition by airless method.

Video:

Paint spray guns are also often used for painting and painting the ceiling bases.

These devices are usually referred to professional equipment, as they are suitable for working with almost any composition.

Pneumatic spray guns are operated by the use of compressed air, which is responsible for the uniform distribution of the color composition or whitewash on the surface of the ceiling.

Using the spray gun

Before painting the surface of the ceiling, either with the roller or with this type of unit, it must be carefully prepared.

For this, the base is cleaned of dirt and dust, and also remove various oil stains.

Next, you should prepare yourself for the work of the dye composition, for which you must familiarize yourself with the instructions in the package.

The composition itself should be well dispersed and not contain various lumps and films.

If additional color is added, it should be ensured that it is evenly distributed throughout the coloring composition.

Specialists recommend the used composition carefully filtered before use, which can be done if it is passed through a dense fabric.

Painting the base using an automatic machine differs from painting with a roller in that it becomes necessary to use a respirator, since a large amount of the mixture will remain in the air during operation.

How to properly use this type of unit for painting the base of the ceiling, detailed in the video below.

Video:

Before painting directly on the ceiling itself, paint should be poured into a special container, after which the nozzle of the device should be turned aside and make a trial descent.

This is done in order to release air and dirt from the hose. After the uniform flow of paint comes from the nozzle, you can proceed directly to the work itself.

To do this, direct the nozzle to the ceiling surface at a distance of about fifty centimeters and press the start button.

The paint jet should be directed to the ceiling surface as perpendicularly as possible, and care should be taken to ensure uniform application of the formulation.

It should be remembered that it is best to apply paint to the surface at least three layers when using the device.

The video, which is located below, details how to properly use the device when painting the ceiling.

Video:

Painting the ceiling with a spray gun allows you to get a smooth and uniform surface, though only if the work was done in accordance with the technology.

Painting this type of device is much easier than, for example, a roller, in addition, it takes much less time to do the job.

The device can significantly reduce the cost and expense of paint, while the quality of work increases several times.

In any case, this device makes the painting process not only convenient, but also as accurate as possible.