Rubber tiles, what are its advantages?
It is generally believed that for the lining of playgrounds, tracks and other areas, concrete covering, paving or ceramic tiles( porcelain stoneware) is best suited. However, for some time, tile from rubber crumbs has also been used. What is its advantage? And why it was chosen for decoration?
- First, this material is easy to care for .Sometimes, the tile is sufficiently flushed with a stream of water from the hose, and it already looks like a new one.
- Secondly, it has sufficient strength and durability , does not crumble, does not break with time. The period of its operation can reach a dozen years.
- Thirdly, the has a high resistance to the temperature difference. That is why it is often used in harsh climatic conditions.
- Fourthly, material is of the type of trauma-safe , since it prevents slipping. Fifth, the has sufficient elasticity and good orthopedic characteristics of the , which is why a rubber tile is often used for playgrounds.
- Sixth, a variety of colors and shapes allows you to choose a tile of any design. The plus is also that its shade does not fade with time.
- Seventh, is easily dismantled by .There is no need to call specialists for repair.
Rubber tiles: scope of use
Rubberized tiles are available in a variety of shapes and sizes, therefore can be used in completely different areas. For example, there may be a typical square shape, "coil", "spider", "brick", "wave"( like pavement).Apply it for children's and sports grounds, the area around the pools, for the design of garden paths, verandas, porches, steps, when creating a golf zone and in many other places.
As already mentioned, tiles have damping characteristics, so the probability of getting bruises and injuries is minimal. Steps and stairs are also often lined with this material, as it provides excellent anti-slip properties. And even in the stables it is widely used, since there is no dust and dirt, which often appears from cement and is so harmful to animals. In addition, the tile has noise-absorbing properties, therefore, the hooves of hoofs are heard less.
Rubber tiling
The technology of laying rubber tiles depends on the shape and thickness of the material. The tile, having a thickness of 30-40 mm, is laid on a loose or concrete substrate, whether it is asphalt, concrete, cement-sand composition( 3: 1 ratio), etc. Between themselves, the tiles are joined with plastic sleeves( usually come complete).Thanks to it, the tile does not "move out" and is held tightly on the base. On the sand cushion the material also holds well thanks to the relief side.
In the case where an even stronger connection is required( to prevent intentional damage and acts of vandalism), the material is joined with polyurethane adhesive. Thus, a single coating is obtained, which is difficult to break even with effort.
There is also a second type of rubber material - pavers, with a total thickness of 15 to 30 mm. It is initially laid only on a solid concrete base with the use of glue based on polyurethane or bituminous binder. The necessary dimensions and geometry can be given with a hacksaw or a jigsaw.
Note! Prior to laying, the material should be stored in a dry place and in no case should it be washed with any chemical means. It is allowed only to wipe with a damp cloth or clean it with water from a hose. In winter, snow is removed only with a plastic shovel.
As can be seen from the above, the masonry process is fairly simple. There is no need to call specialists for proper installation. You can do everything yourself. The only thing you need is the correct calculation of the material. To do this, it is important to measure the area and with the received data to come to the store. Depending on the size of the tile, sales consultants will determine the amount of material required.