Why do you need elastic tile adhesive?
It would seem that the assembly staff only needs to keep the tile firmly on the wall, but it is not. Elasticity is very important, because due to temperature changes the base on which the tile is applied can have little mobility, which often results in flaking or cracking of the lining. Therefore, applying elastic adhesive for the tile, you, therefore, protect it from deformation along with the surface. In particular, if you choose between a cement-based compound and an epoxy adhesive, it is better to choose the second, as more ductile.
Very easy to use one-component formulations in the form of pastes, sold in finished form. They have sufficient plasticity to secure the tile and increase the longevity of the cladding. They do not need to be kneaded, observing the manufacturer's strict proportions, you can start working immediately, bringing glue from the store. Composition based on cement( sometimes with the addition of plasticizers) - cheap white glue for tile fast hardening, elasticity is relatively low. It is based, as a rule, white cement with additives that increase the viscosity and elasticity, is often used for mosaics.
Quick-drying glue for tiles: advantages and disadvantages
For many, it will be a surprise that in fact a ready-made quick-drying tile adhesive gives you the opportunity to work quite comfortably, without too much fussiness. But the compositions on the basis of cement, if plasticizers are not added to it, dry drastically quickly. If you have mixed, for example, a bucket of cement glue for a tile, be prepared for the fact that you will have time to use only a fifth of the harvested volume.
Any adhesive composition is the worst kept on a polished surface, for qualitative adhesion it is necessary to give a certain roughness to the wall.
Therefore, it is best, of course, to buy tubes, as well as tubes that can be filled into conventional construction guns for sealant. Such nuts include liquid nails. To work with these compounds you do not need a notched spatula, or a mixing tank, the work will be done quickly and cleanly. It is necessary to put a gel-like polymer adhesive for tiles( based on acrylic) on the wall or directly on the tile, in several strips or drops, and you can proceed to the lining.
What is good for two-component glue for tiles?
If you want to have high quality wall tiles, use only those compounds with which you are more comfortable working. Liquid nails, which are so named because of the point connection of the tiles with the surface, are very easy to use and provide a dead grip for the lining. However, sometimes you need to glue the tile on a tree, and in this case you will be more suited to reactive compounds, that is, those obtained by reacting two separate components.
First of all, the well-known universal epoxy adhesive is first mentioned, for which it is necessary to mix the base part, which is based on resin, and hardener. From the amount of the last depends on the time of congealing of the composition, so try not to shift this component, otherwise you will not even have time to oil the tile. Two-component liquid glue for tiles is ideal for lining metal, plastic and wooden surfaces with a ceramic coating.