Polymer compounds or liquid nails?
One way to fix the ceiling skirting is to use a polymer mixture. The most common brands are "Titan" and "Moment" , which have an excellent astringent base, quickly wither and firmly hold the attached materials. In addition to these brands, there are many others that differ only from the manufacturer and the price. Compositions on a polymer base are used with a solvent that maintains them in the liquid state.
When deciding how to glue a ceiling skirting glue, you can stop on a version of liquid nails. This composition perfectly keeps almost any material, so from whatever component your ceiling skirting was, your liquid nails will securely fix it in the right place. There are two types of liquid nails: neopropylene and acrylic nails. The first option is made from organic solvent, has a sharp odor and is unsafe for a person until completely dry. However, it can be used in rooms with high humidity, which is not available for acrylic liquid nails.
Note! Acrylic liquid nails do not have a sharp odor and do not emit harmful substances during the drying process.
How to glue the ceiling skirting glue to not additionally equal the wall?
Sales consultants in construction stores often ask how best to glue the ceiling skirting. And a frequent recommendation is the use of a special putty. Unlike the polymer composition, the skirting board does not have to be held for a long time, so that it can be seized using a putty. An important factor in his favor is the ability to use the compound in closed rooms, without the need for ventilation. In addition, the wall should not be perfectly even to attach the skirting. All the irregularities in the wall can be eliminated with the same mixture.
An important factor is the fact that the material attached to such a base will be kept reliably and for a long time. Such a putty is applied very simply, using a spatula. It spreads evenly over the surface, and a plinth is attached to this layer. Remains of the mixture are removed, they can cover the cracks between the plinth and the wall.
Note! Putty for fixing the skirting board is not necessary to buy, it can be cooked and independently.
We prepare the composition with our own hands
If you decide how best to glue the ceiling skirting, you decided to use the putty, then you need to consider the way it is prepared independently. To do this, you need the following materials:
- Finish mixture;
- Adhesive PVA;
- Water;
- Net capacity.
Note! For a basis it is possible to take a finishing shpaklevku from any manufacturer .The process begins with the fact that the final putty is filled into the clean container. Further PVA is added in volume one fourth of the volume of the filled up final mix. After that, water is gradually poured, the composition is constantly mixed for as long as necessary to produce a creamy-like density.
After the required consistency has been obtained, the finished mixture must be infused for five minutes, and after that it is again mixed. It is necessary to make sure that lumps and clots do not form in the mixture. Use the finished mixture can be for one and a half to two hours.
