The device of the Russian oven: the order of the significant elements of the
Knowledge of all the features of the device of this heating element plays an important role in choosing the right design of the furnace. If you decide to build such a structure in your holiday home, then you need to determine all the components of this device, so that it helps in choosing the right building material and the type of individual elements.
Important! The construction of this device involves the development or acquisition of the correct masonry scheme.
So, the Russian stove with a tamper consists of three main components:
- Firebox;
- Chimney;
- Pipe.
Each of these components is of key importance and is responsible for the operation of the entire heating system. Russian furnaces, whose drawings can be found on the Internet, imply a sufficient amount of free space in the house. In other words, the oven itself should be located in a place that does not interfere with the passage and placement of furniture elements.
Furnace furnace - the main element of the
The furnace can be called the heart of the heating design of any plan, especially the Russian furnace. This is a certain size chamber in which combustion of fuel material takes place, in our case firewood. The firebox should be arranged in such a way that the air constantly enters it, which forms a common thrust affecting the speed and quality of the combustion of the fuel.
Important! The dimensions of the Russian kiln should be commensurate with the dimensions of the furnace itself, which will allow the required air temperature in the residential premises to be pumped. For a constant influx of air under the furnace, an ashtray is organized, which plays two roles at the same time. The first task of the blower is to supply air to the combustion chamber, and the second task involves a certain size of the site for the removal of ash.
Chimney and chimney as a guarantee of quality heating
Chimney is a specially laid out system of channels through which surplus heat energy along with smoke is diverted into the pipe. The scheme of the Russian kiln tells in detail how to properly lay the chimney inside a heating furnace.
Important! The chimney should not have sharp drops and rough internal walls, this can cause air bubbles.
Due to the rather large surplus of heat energy that is diverted into the pipe, the chimney is arranged in such a way as to have the maximum number of turns and zigzags. This allows you to additionally heat one wall in a residential house, along which a chimney is laid.
Special attention should be paid to the pipe, which will have a rather high heating temperature. This suggests that such a pipe should not come into contact with easily combustible building materials, which can cause a fire. Among other things, do not forget about the difference in the temperature of the pipe inside the house and on the street. As a rule, this causes the formation of condensate, which can damage asbestos or steel pipes. Ideally, such a pipe should be made of galvanized steel.
