Shower cabin connection

The first stages of establishing

The installation of a shower room is considered to be one of the not simple processes for which instructions and installation rules are to be submitted. In order to correctly determine the location in which the installation must be located, you should adhere to such characteristics:

• First you need to bring the metal structures to the electrical network, which must necessarily be grounded.
• Installation should be located near the ventilation, so that the condensation can not damage the walls and other objects.

At the very beginning, when it takes time to connect the installation, it is necessary to assemble it and to be well-oriented in its characteristics. Before the shower is connected to the water supply networks, you need to understand its exact dimensions.

At the initial stage, it takes time to sort out the bottom of the shower - the pallet. It must be positioned in a horizontal position using long levels. To ensure that everything is stable, you can use additional central supports.

To connect a drain pan to a drainage network, you need:

• When the installation is connected to a drainage system, it is best to use flexible hoses that are sufficiently long.
• Piping must be laid with a certain slope
• It is advisable to use a sewage pump if your shower is located at a great distance from the riser.
• Also operate a pump with a magnetic valve to prevent flooding.
• In order for the water to flow through the drainage system without problems, the siphon location must be above the drain.

The main thing to remember is always that the shower tray in a fixed state must always be located above the level of the sewage system. This is one of the most important rules at the earliest stages of mounting the installation of your shower.

Main installation rules for water systems

When the installation process of the water supply system is in progress, it is necessary to ensure the hermetic qualities of all connections. To do this, all installers and plumbers advise to use special hermetic means.

Special attention to ensure that the connection of the shower enclosure has been carried out correctly it is necessary to adhere to this:

1. Water pipes should be positioned along the length of the floor or hidden under it.
2. Water supply comes from under the sink.
3. Water filters must be installed.

When connecting the shower to the water mains, it must be done as follows:

1. To begin, close the water and open the taps with hot and cold water to reduce the pressure.
2. The previous shower must be cleaned using a special tool.
3. With the help of ticks, it is necessary to remove the coupling from the old shower. Compressor fittings for cold and hot water systems are then put on.
4. A special coating must be applied to the thread on which the adapter will be screwed.
5. Openings in the wall are made using a drill.
6. According to the instructions it is necessary to apply a silicone sealant and attach the anchor.
7. Special hoses must be installed to the adapter, which must be screwed in with the mites.
8. To install the shower panel on the bolts are put on the wells that start with the outer bolt.
9. On the outer part of the panel, the artificial plates that are attached to the water supply pipe are screwed.
10. To check the tightness of all connections, it is necessary to turn on the water in the riser and screw in the handle.

Last connection steps for

The shower enclosure can only have an electrical connection function if it is equipped with a hydromassage device or a steam generator. For these connections, a three-core cable with certain sections is used. Also you need to install the ceiling part:

• In the basement you need to fix the watering can with the hose, the speaker and the fan with a certain illumination.
• The ceiling of the installation is fixed to special elements. At installation it is necessary to grease all connecting places by hermetic means.

Very important role is played by installing the door of the installation, which must have such fasteners:

1. All door rollers must be installed.
2. The door must be with sealing material.
3. When adjusting the door, you need to find its most convenient location.
4. All screws and other swivel elements must be hidden.
5. The process of establishing all the missing elements.

Adjustment of the

installation To connect the shower enclosure to the criteria, it is necessary to check the following items:

• The strength of the pallet securing.
• All panels must not have flaws.
• Installation should not be at sharp angles.
• Seams should be made as tight as possible.
• When starting the water, and when putting it into the sewer, the cabin should have good and comfortable conditions for finding.