How to put a tile on a wall

The use of tiles during repairs has been popular for decades. This is explained by its distinctive functional and operational features. You can decorate any kind of wall yourself. It is necessary to clearly understand the entire technology of facing. And how to put the tiles on the wall, we will analyze in our article.

Staging of tiling on the wall

At every stage, all work must be done thoroughly. It is enough to choose the wrong kind of tile and all the work will go wrong. The tile is divided into four classes in terms of strength. For example: lining the brittle tile floor, in a short period of time you can find cracks in the coating.

Preliminary stage

The first step in the step: the exact calculation of the required number of tiles, colors and models.

Many people ask themselves in an independent calculation: how to lay out the tiles on the wall and not buy too much of the necessary material? It is necessary to measure walls, height and width using roulette.determine the area of ​​the future working surface and the footage of the required material. Advice - buy with a small margin of 1-2 square meters.

Preparatory stage

The most important thing is the preparation of the wall. On an unprepared surface, the tile can not be placed ideally. If the surface is smooth and smooth - you can proceed to the lining using glue or mastic.

To check the stone surfaces for evenness a special strip is used. All irregularities greater than 4mm must be eliminated.

All defects are eliminated with a special solution and tools, plaster can also be used. When using the latter, special rails are used to level the walls. Professionals advise the surface to be additionally primed.

Cladding stage

You can start the tile on the wall from the floor or from the wall. The difference is not special. But if work begins on the floor - the joints between the tile on the floor and the wall should be tightly pressed.

Next, the glue in the bucket and the work begins with the installation of tiles in the lower corner. The adhesive must be applied exactly and accurately.

The working material to the wall is pressed down with little effort. For better grip, the tile is taped with a staple handle. Laying the first row should be fixed with a pre-prepared support, which should be perfectly even. Immediately fit more than five rows of working elements. Removing plastic crosses at the intersection of four tiles with an awl.

How to put a tile on a wall of plasterboard? The lining passes according to the method described above, only the crate of the surface must be reinforced, the glue is applied to the tile.

How to put a tile on a wall in the bathroom? Technology does not differ from the generally accepted one. Only do not save on adhesive compounds, to avoid all plumbing spreads, use special forceps, with which you can give the tile the desired shape.

How to put the tile on the kitchen apron? The technology is the same. The difference is that it is better to choose a primer than acrylic, in the presence of a concrete surface it is worth using concrete-contact, which dries very quickly.

Finishing stage

After 24 hours the adhesive will dry, it is necessary to hold the rubber staple and grout sealing joints and then remove the excess composition from the work surface.

In our article for clarity, there are photos and videos that answer the question of how to put a tile on the wall.

Video laying tiles on the wall with their own hands