Puttying the walls with your own hands

As you know, putty looks like a dry powder, later diluted in water, or a ready-made creamy mass. The purpose of the putty - the final leveling of the walls for wallpaper, painting or other wall decoration.

Contents

  1. On a cement basis
    1. On a gypsum-based
    2. Instructions for laying walls
    3. Video puttying the walls with your own hands

If you started the puttying of walls with your own hands( photo and video can be viewed right here), the substrate should be dry, strong and well primed. Primer is necessary to protect against mold and fungus, and to achieve maximum adhesion of the surface with putty. Sometimes special antiseptic primers are used. Apply primer with a brush or roller. It depends on the convenience and condition of the surface. You can also use a primer or spray gun.

Putty mixes can be of two types: cement-based and gypsum-based.

Cement-based

Cement-based putty after drying becomes gray. Its main advantage over gypsum is that the viability of the solution is much higher. The main minus is the gray color, which emerges from under thin translucent wallpaper and paint layer. It is for this reason that cement plaster is rarely used.

On a gypsum-based

A negative moment in choosing a gypsum putty is the short life of the mortar and the fact that such a putty is only suitable for indoor work. But the walls after drying become white and perfectly suitable for any kind of finish.

Instruction for puttying of walls

For realization of puttying of concrete and panel walls with own hands two spatulas are required: narrow and wide. A narrow spatula we catch the putty, and then shift it to a wide. Gently spread the putty first on the spatula, and then on the wall. It is desirable to adhere to the horizontal direction. Appear excess surplus and pass through the layer with a clean spatula for leveling. Putty should be a thin layer, because as a thick layer can dry during drying. If there are irregularities on the wall, then do not forget to carefully rub the solution into them. To achieve a more smooth surface, before use, putty can be beaten with a drill with a nozzle "mixer".

Putty is the starting and finishing. First, it will be advisable to apply the starter layer and allow it to dry. The next day, if no flaws are found, you can add the finishing layer. If the defects still appear, it makes sense to use a special grinding mesh and sand the surface. Finishing putty of the walls with their own hands( see video tutorial) usually takes place in two layers.

Today there is no shortage of choices for wall finishing: paints, wallpaper, decorative panels, tiles, wood and much more. However, decorative shpaklevka more popular. With the help of putty solutions of different shades, you can achieve a huge number of interesting effects that will be beneficial to allocate your housing.

Decorative puttying of walls with their own hands - this is the styling of stone and brick, and plaster, from which the museums and past eras. Using a roller, spatula and brushes of various sizes, you can do exactly what the shower asks, almost without fear of ruining the wall, because the putty can always be corrected. Decoration of the wall with putty is perhaps one of the cheapest options, however this variant contains unexpected possibilities for brave people with imagination.

Video putty walls with their own hands

For clarity below, we offer you to familiarize yourself with the video lesson on wall fillings.

instagram viewer