What conclusions can be drawn?
In fact: infrared light is similar to ordinary light, it creates lighting. The only difference is that infrared waves are absorbed by heat, becoming energy of heat. But in space at this time there is practically no energy loss. Therefore this is the most natural and most perfect method of heating.
Despite the fact that infrared light was discovered in the early 19th century, its active use in everyday life became popular only now. Infrared heating is considered a fairly new, promising type of room heating. He has a lot of advantages over classical methods of heating.
They attract attention with its economy and practicality in operation and installation. You do not need to have qualified maintenance and repair, since it has a long service life, and most competitors do not. This way of transferring heat contributes to the heating of surfaces and prevents the heating of air, as is the case with convection heating.
Infrared heat will save
High prices and limit of energy resources have led to the fact that economic heating has become relevant in the application in the present tense. Therefore, all those who wish to save money, it is recommended to think about the cost of heat. The most suitable for this are enterprises and organizations that contain various facilities( mills, gyms, storehouses, garage spaces) in their care.
As it has been repeatedly stated, heaters are very economical and practical. Heating floors, walls, furniture in the operating range, in contrast to air, as in convection heating, ensure the absence of drafts and the spread of dust through the ceiling.
Infrared heating is also called heat wave, radiant and long wave.
It should be understood that converter heating works in such a way that the air becomes warm first of all, which only then warms the person. Converter flows move warm air up, and the cold one is at the bottom. Thus, the ceiling is the most acceptable temperature mode, but very inconvenient for living.
At that time, the thermal energy from the infrared heater does not come in contact with air, but directly reaches people and objects that are in the range of action. The accumulation of heat at the ceiling is minimized, and energy is saved by 40% more than with a similar heating by a convector.
Important! The only heating that can perform local heating of the entire workplace is infrared heating. It is regulated according to the temperature in different zones. This is achieved by placing individual devices at an equal distance from each other without completely heating the room.
These heaters allow instant heat to be supplied to objects, so there is no need to pre-prepare the room for the arrival of guests, the heat will come instantly, on the contrary, it is possible to lower the temperature regimes in accordance with the time of day and the energy consumption limit( night, lunch, holidays, weekends).
Bare feet on warm paths
Basic parameters of infrared warm floor:
- Size. Thickness - 0,3 - 0,4 mm, width - 0, 5 - 0,8 m.
- Power - 140 - 150 W per square meter.
- Power is a standard electrical system.
- Temperature regime - up to 55 ° C. Melting of the film - at 210 ° C.
- Heating element - graphite.
The floor is a hyperfine polymer film that transmits infrared rays up to 20 microns in length. The black graphite strips, which are a heating element, are supplied through conductors with a voltage of 220 W, they are sealed in a polyester film. Electromagnetic radiation from this type of heating is much lower than analog. This quality reduces power consumption and improves efficiency.
So, having connected the floor to the electrical network through the thermostat, the floor cloth begins to bask and emit waves of warm sunlight.
This contributes to the fact that all opaque objects are heated and the room acquires the necessary degree of temperature. It is worth summarizing again that this heating heats people and objects in the zone of action, rather than all the air in the room, and this reduces energy consumption, and hence the cost of it.
