Greenhouse with own hands

Own greenhouse and greenhouse with their own hands - this is a great way to save money for buying vegetables. In addition, building for ourselves - we build with love, because actually grown cucumbers, tomatoes and other vegetables seem especially tasty. But in order to get such a desired harvest, it is necessary to think about where to put the greenhouse, what material to use for erection and what is the procedure for creating a greenhouse. All these issues need to be solved long before the work on the construction of such a desired oasis of fresh products.

Nevertheless, you can make a greenhouse with your own hands for everyone. For this, it is not necessary to have specific knowledge and skills in construction, so this task will be able to even the most ordinary villager. In this article, we will consider the erection of a film greenhouse from a PVC frame. Under a preselected flat and southern location, it is necessary to draw up a greenhouse plan. This will help to take into account the cost of materials and their cost. Our summer greenhouse of frames with its own hands will be sheathed with a film that will last a couple of seasons.

Materials for building a greenhouse

Thus, for the construction of a greenhouse for a dacha with their own hands, the following materials are needed:

Stages of erecting a greenhouse

With all the materials necessary to build a greenhouse with your own hands, you can see in the photo below.

Directly the work should begin with the alignment and compaction of the ground on which it will be located. Then you need to knock down the boards along the perimeter, beforehand treating them with an antiseptic, covering with a layer of drying oil or hot resin. Wooden parts of the entire structure can also be burned with a blowtorch. At the corners of the box of boards it is required to strengthen the reinforcement.

Next, proceed to fixing the reinforcement around the perimeter of the foundation. For a greenhouse 6x3 you need 30-35 rods of reinforcement. The remaining rods need to be dug into the earth to a depth of about 50 cm, and not less than 60 cm above the ground, and how to strengthen it, becauseIn the future, the design must retain a substantial weight. The next step is to put PVC pipes on the reinforced bars, which will now connect the opposite bars of the reinforcement to each other.

Now it is possible to fix PVC pipes with metal hinges. To do this, it is better to use a screwdriver, although you can do with a conventional screwdriver.

Next of the whole construction you need to add strength and stability by reinforcing it with a bar 50x50.

The next step is to fasten a pair of PVC pipes together, so that the total length is equal to the length of the greenhouse. Then fix this pipe to the transverse arcs of the frame.

Now it's time to cover the frame with a plastic wrap. Mount it with the help of special staples and wooden slats.

Where there is a doorway, the film sags inside. After accurate measurements of the doorway, knock down the beam by its size. Surface of the film in the opening is cut off. We fix the door to the skeleton of the greenhouse with the help of metal hinges. In the same way we attach the windows. Detailed instructions on how to make a greenhouse for seedlings with your own hands, is described in the video.

At last we have achieved the set goal and now we have a greenhouse built by ourselves, which does not require special heating. Now it's a matter of taste and coziness, to equip shelves, to build quality land along with mineral and organic fertilizers, to choose the desired flora in order to get a delicious, rich and always fresh harvest.

Photo of the hotbed with their own hands

See below photos of greenhouses made by themselves:

Video how to make a greenhouse with your own hands

See below the video of building a hotbed with your own hands