Buy an immersion pumpfor the well is easy - today manufacturers produce a variety of submersible pump models for the uninterrupted supply of water of various volumes. All of them are widely used for water supply, irrigation and irrigation in private houses and on personal plots where it is not possible to install a surface pump.
Many submersible pump models are completely made of stainless steel, which increases their quality, functionality and service life.
The price of a submersible pump for a well is completely accessible to everyone and varies depending on the manufacturer, the quality and capabilities of the submersible pump.
All submersible pumps available for sale can lift water from a great depth and feed it to the surface. But how to choose the pump you need?
When choosing a pump, first of all - consider the depth of the reservoir. This is necessary to determine the force of the water pressure, as well as the volume of water necessary for your needs.
"Kid"
For example, a submersible pump for a well "Malysh" is able to provide enough water for a country house or suburban area.
This pump can be installed in wells, boreholes or any other reservoirs diameter greater than 8 cm.
Pumps "Baby" are industrial and domestic, the lower or upper wall of water. They cost a little - within 2000 rubles.
Video:
«water jet»
Submersible pumps "water jet" wells - a multi-stage centrifugal units with operating "floating" wheels, built-in capacitor and motor "watered" with water.
With its help, you can easily pump water from wells and wells 100 m in diameter and even from open reservoirs.
The pump is used for water supply, watering the garden and garden. Two numbers that are in the pump designation will help you to choose the pump correctly.
The first number is the maximum water flow that the pump delivers per minute. The second number is the maximum head of water in meters.
"Gileks"
The Gileks pump is designed for home use.
When choosing a pump, pay attention to the marking - it will tell you about the important parameters of the equipment - the height of the lifting fluid and the volume of pumped water.
Gilex pumps of various sizes and purposes are of high quality, reliability, affordable cost and easy operation.
«brook»
Universal pump "brook" provides lifting water from wells, ponds and wells to supply water to the house, watering the garden and the garden. This pump can supply water horizontally over a distance of more than 100 m.
This pump has an optimum ratio of price and quality, protection against overload and from the suction of any mechanical impurities from the bottom of a well or other body of water.
"Brook" meets all safety requirements, besides it is reliable and trouble-free in operation.
Video:
Aquarius
Aquarius pumps have long earned the fame of trouble-free pumps used in everyday life.
These pump models are made of high quality materials: food plastic, stainless steel, brass.
«Grundfos»
Depending on the specific model, they work without problems in clean water and in dirty water, where the level of sand content is greatly increased.
Grundfos pumps are compact submersible pumps of small diameter, with built-in protection and high wear resistance.
"Dab"
"Dab" pumps are specially designed for collective and individual irrigation and water supply systems.
This type of pumps is electromechanically controlled with an integrated pressure and flow sensor.
They work absolutely noiselessly, do not silt the well and do not muddy the water. Can be used in wells with a diameter of 6 cm or more.
Types and purpose of
Submersible pumps are of various types:
- centrifugal;
- vibrating;
- drainage;
- pumps with automatics;
- pumps with integrated check valve.
The centrifugal submersible pump for the well is used to supply water from a depth of up to 30 m.
They have small diameters, an elongated shape and can work in sand and limestone water. Easily provide water to the house, even if the well is located quite far from it.
Submersible vibrating pumps for wells are used for pumping water for individual needs and watering the garden without any impurities: seaweed, silt, sand, so they are located a meter from the bottom of the well.
Such pumps are easy to operate with frequent immersion.
Submersible drainage pumps for wells are used for pumping dirty water from pits, ditches, flooded cellars and cellars.
They are very helpful in the period of spring flooding, as well as during strong and prolonged rains.
Submersible pump for a well with automation is an efficient and reliable solution for the organization of autonomous water supply.
Automation protects the pump against power surges and many unfavorable factors.
Submersible pump for a well with a non-return valve prevents the return of water back to the reservoir.
When choosing such a pump, attention should be paid to the characteristics of the check valve, its quality and tightness.
We hope that we have helped you make your choice!
