Plaster under the fur coat, what is it?
It is known that when priming a plaster mixture, the surface turns out to be uneven, that is, a kind of "fur coat" is formed, although it is rather sloppy. Of course, you could leave it that way, but it's much better to create an invoice using special mixtures or with a certain finishing technology. Why? Firstly, you yourself can decide which grain of a fur coat you need, and secondly, this kind of finish turns out to be much more accurate. In other words, the plaster under the fur coat in decorative execution will allow you to get exactly the result you expect, unlike the unpredictable rough spray.
Another argument in favor of decorative structured finish is the fact that evenly rough layer, when light falls on it, gives the effect of the volume of , and not a choppy chiaroscuro. To create the desired effect on the walls, only a spatula and a special roller are sufficient. And on the ceiling to achieve roughness of the plastered surface it is possible, only having rolled with the roller on a fresh layer, after a while after drawing of a textured plaster has been finished.
Shuba, serving for beauty, not for heat
Beauty often requires not so much sacrifice as some physical effort to create it. This is sculpture, painting, and plastering of walls. And if in the first two cases talent is needed, then in the latter only knowledge of the sequence of actions for all possible ways. By the way, there are several of them: mechanical spraying "under a fur coat", imitation of a fur coat by application of a roller, and, finally, a spray of a decorative layer. But, let's be consistent and begin by preparing the surface and preparing the mixture. As with any other plastering work, the fur coat requires an ideal wall and ceiling surface. The latter should be particularly reliable, so that the layers do not lag behind it under their own weight. After carefully cleaning all the surfaces that will be covered with plaster, mix the solution.
In addition to ready-made dry mixtures, there are other rather cunning solutions. For example, a fur coat can perfectly work out with the usual building mix of cement and sand in the proportion of one to three. Composition can be supplemented with some dye to create a color coat .Having achieved a consistence of oil, we put the composition on the wall. Another option - very few known, but quite affordable. For the mixture, we need the usual enamel paint( do not be surprised, the fur coat will be almost eternal), as well as putty. Components are mixed one to one, while the depth of the texture of the texture is directly proportional to the amount of plaster, that is, the more it is, the more noticeable the roughness. Ideal fit facade decorative plaster.
Application of plaster of a fur coat without special efforts
With the machine plaster all is clear - charge a mix and direct on the prepared surface a jet which is pushed out from a bell by the powerful compressor. Of course, there are some tricks, for example, one should try to ensure that the jet of solution is strictly perpendicular to the wall, so fewer splashes. In order to get to the smallest details how to correctly apply the plaster of a fur coat, the video on this topic will be useful.
For plastering work, you need to follow two rules: each next line of the mixture is applied above the previous one, and so that it partially overlays on it. Among other things, it is convenient to apply plaster to the ceiling using the machine method.
But, since special equipment is not available to everyone, it will be easier to act in a grandfather way. Take a regular small whisker and soak into the solution. After that, in the other hand, take a short stick and, holding it a short distance from the wall, hit it with a broom. Sprays will lie down, creating a smooth, rough surface. The granularity of the structure depends on the density of the broom, the distance of the stick from the surface to be treated and the force of impacts. Sometimes the application of plaster coat is carried out through a fine mesh. Another, more convenient way - with a brush. It should be dipped in the solution, then turn the bristle up and hold it with a stick or plank from the wall to yourself. Flexible bristles will dot the surface with the smallest spray, creating a finely structured fur coat.
Plaster with the texture of "fur coat" is suitable for any design of the room, and is an excellent replacement for pretty bored smooth ceilings. However, the main argument in its favor is an excellent result at low cost.