Decoration of the pool with tiles - what distinguishes this group of materials?
The presence of a private pool has long ceased to be a rarity. But have you noticed that it is decorative materials that make the design of the pool especially special magic and luxury. The main place among them occupies trim pool with tiles .It helps to create a truly unforgettable atmosphere.
The beauty is that the ceramic tiles for the pool always meet the highest quality standards. So, due to its rough structure or relief image, it is safe, prevents slipping and almost completely eliminates falls and injuries.
In addition, this tile is more durable, resistant to temperature changes, has overestimated water repellent and antibacterial parameters, easily tolerates abrasive cleaning compounds. Often tiles have few pores and voids. In addition to the choice of sex, a wide range of creativity provides a tiled basin.
Facing the pool with tiles - anyone will find the solution
Now in modern stores you can find the widest choice of different facing materials. But the best and most refined is still considered the original tile-mosaic for the pool .It does not absorb moisture, it is resistant to the action of microorganisms, salts and scorching sun rays.
Sometimes glazed tiles are used. Most often it is laid in places where there is an increased risk of falling or slipping on slopes and stairs. Unglazed varieties are used to trim the pool area from the outside.
In any case, now you can find the widest range. A huge variety of colors, textures, patterns and shapes will not leave indifferent even the most demanding aesthetes.
Laying tiles in the pool - the technique of work
The very installation of tiles in the pool practically does not differ from the usual laying and does not have its own specific features. But, of course, for the lining of the pool, it is still better to invite a knowledgeable professional. If you decide to put the tiles on your own, then we will tell you how to do it correctly and competently to achieve an unsurpassed effect.
So, before work, the surface is cleaned, leveled with a coarse sandpaper or a hard spatula. If necessary, use special plaster. Then the surface is painted with a water-repellent, deeply penetrating primer with a roller and a wide brush.
The next step is laying the tile itself. To do this, you will need a tile adhesive or cement based adhesive. When diluting the cement base, follow the instructions carefully. Then apply evenly glue to the surface and, tapping gently on the tile, press it against the surface.
Check the level of the tile attached horizontally and vertically. Insert the pre-prepared crosses into the seams. Similarly, repeat the process with the following rows. After laying, wait two days and, using a rubber spatula and a suitable grout in the color, seal all the existing seams.
Do not forget to clean the tile from the glue. To do this, if not completely dry, use a damp cloth. If you notice the bloopers only when it is strongly withered, then gently remove excess, using a soft spatula and a wet rag.
Remember that when laying the pool begin to lay the tiles you need from the floor. Next is the facing of the walls of the pool, sides and steps. Lastly, the facing material is laid for the basin tracks and the adjacent territory.