The closet is a convenient and multi-functional interior of any apartment. This cabinet, occupying quite a bit of space, when compared with conventional wardrobes, has a much greater capacity and convenience of its use.
It is quite natural that after some time after installation it is necessary to put your hands and do some minor operations so that this cabinet does not cause you any trouble, while retaining its full convenience and functionality. In particular, this concerns the need to adjust its doors, which must move freely and maintain their original position.
Operations performed when adjusting doors
Adjusting the verticality of the
If you notice that the side edges of the doors are not strictly vertical, you should fix this defect.
First of all, you need to find the bracket with the bolt, located next to the bottom of the door, in the place where the moving mechanisms are located. Turning the bolt counter-clockwise, you will lift the adjacent side of the door, if you turn it in the opposite direction, then this you will lower it. For information, know that each complete turn of the bolt is almost equivalent to one millimeter of the door displacement.
Adjusting the contiguity to the side frame
If you completely cover the door of the sliding door wardrobe, you notice that the door to the side stand does not fit tightly, then adjust the horizontal stroke of the corresponding door. Next to the first bracket we just mentioned, we need to find the second one, which is most often fixed on the lateral vertical wall in its lower part or in the middle of it.
Features existing in some
models Some models of control cabinets are made slightly different.
If you have, for example, a cabinet "STERH" installed, then to adjust the travel of the doors it is necessary to find the bracket fixed to the bolt lock located on the sealing frame in the middle part of the cabinet.
Although now cabinets with rail door travel are no longer produced, it is possible that in your life you will meet with them. In such cases, the stroke is adjusted by selecting the height of the rails( by raising or lowering it).
This is important
You should understand that the position of the cabinet door depends on the degree of deterioration of the driving mechanism. If you want to ensure the long life of your closet, at least once every six months you should make a complete bulkhead of the rollers. To ensure smooth running, you must apply mechanical lubrication or engine oil. If this is not done, then sooner or later the mechanism will fail. The replacement of it is poured into a rather difficult process due to the complexity of finding the necessary spare parts.
