PVC floor tiles: what is the scope of its application?
Before we determine where PVC floor tiles are used, let's look at its contents. This material consists of 5 layers: basic, basic, with a patterned, transparent wear-resistant, polyurethane protective. As can be seen from the above, the composition can be said to be a linoleum tile( since, in general, the internal components are similar).Thickness varies from 1.5 to 3.5 cm. The larger it is, the stronger the material. Now, when we see its composition, similar to the composition of linoleum, it is not difficult to understand in which areas it is used. First, it is home conditions .Tiles trim the kitchen, corridor, bathroom, utility rooms, etc. Secondly, modular tiles are used in almost any public premises of , be it shops, gyms, car parlors, schools. It is justified by the fact that it has a high mechanical strength.
Advantages and disadvantages of floor tiles PVC
Like any building material, this tile has its pros and cons. Of the shortcomings, only one is isolated: it is artificial. Whatever one may say, PVC is, nevertheless, an artificial material. Advantages much more:
- Easily stacked and simply transported, unlike linoleum, which is much more difficult to carry.
- The floor, finished with PVC tiles, very warm and pleasant for the feet. This is its advantage over porcelain stoneware, for example.
- Soundproofing material. Even if you go on heels, the noise will be almost inaudible.
- Has a huge number of colors and textures. That's why it can be used for almost all interiors.
- Not afraid of moisture and perfectly tolerates cleaning by any detergent.
- Unlike ceramic tiles, PVC coating does not break with time. It is much more practical and durable material.
Technology of laying tiles PVC
As already mentioned, the laying of PVC tiles is simple enough, only necessary to prepare the base. In no case should it be wet. Moreover, it is important that it is even and clean. Any residues from past compositions( wax, oil) - are unacceptable. Also, just before the installation( 48 hours), it is necessary to lay out the tiles from the boxes. It should "get used" to the existing temperature and humidity of the room.
Warning! If you are going to lay PVC tiles on the street, then this is unacceptable. This coating is intended for indoor use only.
Laying of PVC tiles, video with the work process which is presented on our website, should be carried out from the middle of the room. Namely: the central point is put, through it 2 perpendicular lines are carried out, along the axes of which the installation of beacon tiles begins. First put the first row from the center to the wall. If it turns out that the ½ tile ends( not full), then the lines can be slightly shifted. In the course of work, it is also important to use a suitable adhesive. It can be a special mixture for PVC or a typical PVA glue. But it's best to look at the information on the package. Usually they write the recommended composition. It should be applied both to the tile itself and to the base. Surplus is removed with a damp cloth. For those who do not want to do all these works, self-adhesive PVC floor tiles will do. A simple movement of the hand removes the protective film, and the material is fixed.
