Angular shower cubicle is not a luxury
There is a myth that angular shower cabins, the sizes of which can be from 90 centimeters to 1.5 meters, are accessible only to wealthy people. However, this is not so, the simplest systems with a watering can and a thermostat, as well as pallets will cost a relatively small amount, than if you had to take a cab-candy bar. Side panels, plastic or glass, it is not necessary to take, it is quite possible to do with an arc-shaped bar with a curtain.
As for the fences, you can save money even if you install them, the shower corner with its own hands is assembled from one panel and the door in a few hours. It is enough for her to have a sewage outlet and the pipes of hot and cold water supply to the right place. The siphon at the pallet, that, that is used for a bathroom - will not approach. The shower panel is connected to the communication with special hoses that must withstand pressure up to 4 atmospheres .
Corner shower cubicles in the bathroom, with or without doors
A large bathtub occupies a place that you would love to give away with a narrow washing machine? So why not put a shorter capacity, deep enough to sit in it, immersed in the water. But at the same time, you still have the opportunity to have a shower enclosure with a bathtub, which is quite suitable for a bowl of a special configuration. Panels, glass or plastic panels are mounted to the installed frame, after which a shower system is installed on the wall. The whole structure takes about half the capacity, if you open the door, you get a full bath.
A monoblock cabin with a deep pallet can replace a bathtub and, if necessary, turn into a Turkish steam room with a soft temperature of up to 45 degrees, which in the complex is almost a full sauna.
However, you can do and do without doors, or completely fence off the sliding panels of all the capacity of the room. In the first case, a transparent panel is installed, often plastic, as cheaper. It plays the role of a curtain, and water, hitting a transparent barrier, drains into a bath that partially remains open. The second design is especially convenient when entering the corner shower cubicles with the bathtub, completely replacing the curtains with plastic or glass flaps, which can be conveniently fitted with handles.
Angular asymmetric shower cabins when the tray is not needed.
. To install a shower in a room, you can make it similar to the one that is often arranged in a summer residence, that is even without a pallet, only with a watering can and curtains. However, in this case, there must be a good waterproofing in the bathroom, especially in the apartment building, so that moisture does not seep into neighbors from the bottom. Further on the floor is laid a special gangway, along which the drain drains the water, after which you can move to the tiling of the walls with tiles. Angular asymmetric shower cabins are perfectly permissible, so as not to have difficulty with geometry. Before finishing it is desirable to cover all vertical surfaces, as well as the floor, with sealant.
Most of the side panels and pallets can be purchased separately. So, if you still want to have a container under your feet, even with low sides, buy and install a pallet, it can also be ordered from small companies, but the quality may not be high. Having hung on the prepared walls a shower panel, and having established an arch with a curtain, you can enjoy water procedures. Then you can buy and side panels. Or, if you have no idea of anything other than how to assemble a corner shower, get a tray of triangular shape and two doors that can be fixed on the walls.
